A Composting Study of Membrane-Like Polyvinyl Alcohol Based Resins and Nanocomposites

This study presents the effect of biodegradation, in a composting medium, on properties of membrane-like crosslinked and noncrosslinked polyvinyl alcohol (PVA) and nanocomposites. The composting was carried out for 120 days and the biodegradation of these materials was characterized using various techniques. The changes in the PVA resin and nanocomposite surface topography and microstructure during composting were also characterized. The results from the analyses suggest biodegradation of PVA based materials in compost medium was mainly by enzymes secreted by fungi. The results also indicate that the enzymes degraded the amorphous regions of the specimens first and that the PVA crystallinity played an important role in its biodegradation. The surface roughness of the specimens was seen to increase with composting time as the microbial colonies grew which in turn facilitated further microorganism growth. All specimens broke into small pieces between 90 and 120 days of composting as a result of deep biodegradation. Glyoxal and malonic acid crosslinking decreased the PVA biodegradation rate slightly. Addition of highly crystalline microfibrillated cellulose and naturally occurring halloysite nanotubes in PVA based nanocomposites also decreased the biodegradation rate. The three factors: PVA crystallinity, crosslinking and additives, may be utilized effectively to extend the life of these materials in real life applications.     

Bioefficacy of insecticides against Leucinodes orbonalis on brinjal

Studies on bioefficacy of insecticides against brinjal shoot and fruit borer, Leucinodes orbonalis Guenee on brinjal were carried out during 2007 and 2008. The results on bioefficacy of insecticides showed that in terms of shoot infestation, emamectin benzoate (0.002%), endosulfan (0.05%), novaluron (0.01%) and lambda-cyhalothrin (0.004%) were found superior. The total number of drooping shoots was minimum (4.17) in emamectin benzoate followed by endosulfan (6.83) and novaluron (7.00), as compared to spinosad (9.17), deltamethrin (11.67) and Bacillus thuringiensis (13.17). In terms of reduction in fruit infestation, emamectin benzoate (0.002%) was highly effective followed by endosulfan (0.05%), agrospray oil T (0.2%) and spinosad (0.0024%). However, cost benefit ratio was highest in agrospray oil T (0.2%) followed by lambda-cyhalothrin (0.004%), endosulfan (0.05%) and deltamethrin (0.0028%).     

Thermocatalytic Degradation of High Density Polyethylene into Liquid Product

Thermocatalytic degradation of high density polyethylene (HDPE) was carried out using acid activated fire clay catalyst in a semi batch reactor. Thermal pyrolysis was performed in the temperature range of 420–500 °C. The liquid and gaseous yields were increased with increase in temperature. The liquid yield was obtained 30.1 wt% with thermal pyrolysis at temperature of 450 °C, which increased to 41.4 wt% with catalytic pyrolysis using acid activated fire clay catalyst at 10 wt% of catalyst loading. The composition of liquid products obtained by thermal and catalytic pyrolysis was analyzed by gas chromatography-mass spectrometry and compounds identified for catalytic pyrolysis were mainly paraffins and olefins with carbon number range of C₆–C₁₈. The boiling point was found in the range of commercial fuels (gasoline, diesel) and the calorific value was calculated to be 42 MJ/kg.     

Comparative Biodegradation Studies of Non-poronized and Poronized LDPE Using Indigenous Microbial Consortium

Seventeen bacterial isolates were screened for the utilization of low density polyethylene (LDPE) as the sole carbon source, out of which five potential strains were selected for the development of a consortium. In vitro biodegradation efficiency of the consortium was studied for two differently textured forms of LDPE viz. non-poronized and poronized. Although, both the forms were acted-upon well by the consortium, but the degradation was found to be better in the poronized form. This was substantiated by λ-max shift, FTIR spectra and simultaneous TG-DTG-DTA. The analysis revealed the breakage and formation of chemical bonds in the polymer backbone, as a result of microbial activity. The biodegraded samples of non-poronized and poronized LDPE exhibited similar weight losses at 400 °C (24.12% and 24.48%, respectively) as compared to their controls (4% and 4.5% respectively), but the latter could achieve it with greater ease as reveled by its lower heat of reactions (ΔH values). The study signifies the influence of poronization of polyethylene on its rate of biodegradation.     

Air flow and concentration fields at urban road intersections for improved understanding of personal exposure

This paper reviews the state of knowledge on modelling air flow and concentration fields at road intersections. The first part covers the available literature from the past two decades on experimental (both field and wind tunnel) and modelling activities in order to provide insight into the physical basis of flow behaviour at a typical cross-street intersection. This is followed by a review of associated investigations of the impact of traffic-generated localised turbulence on the concentration fields due to emissions from vehicles. There is a discussion on the role of adequate characterisation of vehicle-induced turbulence in making predictions using hybrid models, combining the merits of conventional approaches with information obtained from more detailed modelling. This concludes that, despite advancements in computational techniques, there are crucial knowledge gaps affecting the parameterisations used in current models for individual exposure. This is specifically relevant to the growing impetus on walking and cycling activities on urban roads in the context of current drives for sustainable transport and healthy living. Due to inherently longer travel times involved during such trips, compared to automotive transport, pedestrians and cyclists are subjected to higher levels of exposure to emissions. Current modelling tools seem to under-predict this exposure because of limitations in their design and in the empirical parameters employed.     

Dissipation of flubendiamide in/on Brinjal (Solanum melongena) fruits

A field experiment was conducted at Anand Agricultural University, Anand during Sept-Dec, 2009 to study the rate of degradation of flubendiamide in/on brinjal fruits following foliar application of Fame 480 SC at 90 (standard dose) and 180 (double dose) g a.i. ha(?-1). The residues estimated using HPLC revealed persistence of flubendiamide in/on brinjal till 3rd and 7th day after the last spray at standard and double dose, respectively. The residues of flubendiamamde were reported as parent compound, and no desiodo metabolite was detected. The initial deposits of 0.17 and 0.42 μg g(?-1) in/on brinjal fruits reached below determination level of 0.05 μg g(?-1) on the 5th and 10th day at standard and double dose, respectively. The half life of flubendiamide on brinjal fruits ranged from 2.68 to 2.55 days. Soil samples analyzed on the 15th day after the last spray revealed residues at below determination level (0.05 μg g(?-1)) at either dose of application.     

Enforcement Authority and Vegetation Change at Kumbhalgarh Wildlife Sanctuary,Rajasthan, India

Land cover change in protected areas is often associated with human use, especially illicit extraction, but the direction and spatial distribution of such effects and their drivers are poorly understood. We analyze and explain the spatial distribution of vegetation change at the Kumbhalgarh Wildlife Sanctuary in the Aravalli range of Rajasthan, India using remotely sensed data and observation of conservation institutions. Two satellite images are examined in time series over the 13 years following the founding of the sanctuary through a cross-tabulation technique of dominant classes of vegetation density. The resulting change trajectories are compared for their relative distance to high-traffic forest entrance points for local users. The results show 28% of the study area undergoing change, though in multiple trajectories, with both increasing and decreasing density of vegetation in discrete patches. Areas of change are shown to be closer to entrance points than areas experiencing no change. The patchiness of change results from complex issues in local enforcement authority for middle and lower-level officials in Forest Department bureaucracy, leading to further questions about the efficacy and impact of use restrictions in Protected Areas.     

Pesticide tolerance of Paenibacillus sp. D1 and its chitinase

Excessive use of pesticides in agriculture has led to several problems pertaining to loss of soil fertility and environmental degradation. Biological control agents offer the best alternative to reduce use of toxic pesticides. Paenibacillus sp. D1 isolated from the effluent treatment plant of a seafood processing industry exhibited broad spectrum tolerance towards a number of pesticides at concentrations higher than recommended for field applications. The isolate showed enhanced growth and chitinase production in the presence of some protectant fungicides. None of the tested demethylase inhibitor (DMI) fungicides inhibited growth and chitinase production except triadimefon. The isolate was also tolerant to most commonly used insecticides belonging to the organophosphate, carbamate and cyclodiene organochloride classes. Chitinase of Paenibacillus sp. D1 was found to be more tolerant than the organism itself and was highly stable in the presence of pesticides at the temperature under field conditions in Gujarat, India, i.e. 40 °C. This was suggestive of its potential in integrated pest management (IPM) to significantly reduce the use of harmful chemicals. To our knowledge this is the first extensive study on pesticide tolerance of the Paenibacillus species and its chitinase.     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.