Challenges of small protected areas in urban cities: a case study of Okhla Bird Sanctuary,India

Protected areas have been earmarked throughout the world for the purpose of conserving the biodiversity. The protected areas are facing serious threats due to rapid urban growth, especially in the developing countries like India. The current threats and impacts of urbanization on the Okhla Bird Sanctuary (Delhi, India) have been presented in this paper as a case in point. Uncontrolled urbanization and the lack of policy implementation have been identified as one of the major contributors to incessant biodiversity loss in India and other countries. In addition, a possible management framework for a smaller protected area in an urban setting is presented in brief.     

Assessment of risk factors in forest road design and construction activities with fuzzy analytic hierarchy process approach in Turkey

Forest road design and construction are time-consuming and complicated because various risk factors can be encountered during the process. The aim of this study is to comprehensively assess the risk factors in forest road design and construction using the fuzzy analytic hierarchy process (AHP) method in Turkey, thus contributing to the proper performance of these activities. Within the scope of the study, six main risk factors and 22 sub-risk factors were identified based on literature review. In order to determine the weights of the relevant risk factors, the opinions of three different groups [(group 1: academicians), (group 2: forest engineers (private sector employees + public sector employees)), (group 3: group 1 + group 2)] about the risk factors were obtained. Relevant risk factor weights were determined using the fuzzy AHP method. According to group 3, the most important main risk factors are technical risks and environmental risks. In addition, the most important sub-risk factors for each relevant main risk factor were incorrect road alignment, inadequate work safety in the field, insufficient capital, legal problems on the road alignment, landslide risk during road construction, and illegal logging. Differences were observed between groups 1 and 2 in the weight rankings of relevant risk factor. The results demonstrate that the fuzzy AHP method can be used effectively to assess the risks of forest road design and construction.     

Phytotoxicity of copper fungicides to guava fruits

The copper fungicides viz., Bordeaux mixture, stabilized Bordeaux mixture and copper oxychloride were found phytotoxic to guava fruits, while carbendazim, benomyl and mancozeb were non-phytotoxic. Bordeaux mixture was highly phytotoxic and caused heavy russetting, followed by stabilized Bordeaux mixture and then copper oxychloride. The higher concentrations of these fungicides were more toxic than their lower doses. Russetted fruits failed to attain normal size and thus reduced the quality of fruits to a greater extent.     

Deformation patterns in WorldSID 50th percentile dummy instrumented with IR-TRACC and RibEye™ in different loading configurations

Objective: The purpose of this study was to investigate the effect of different loading configurations on the WorldSID 50th percentile male dummy instrumented either with the Infra-Red Telescoping Rod for the Assessment of Chest Compression (IR-TRACC) or the RibEye? rib deflection measurement system.

Methods: The optical sensors of the RibEye system were used to capture the multipoint deformation of the dummy at frontal and rearward off-center locations in addition to the center of the rib location. The experimental setup consisted of 2 types of loadings: Low severity and high severity. Low-severity loading was performed by deploying a fixture-mounted side airbag on the dummy and high-severity loading was achieved by deploying a driver front airbag mounted in a similar fashion. The low-severity condition aimed at deforming the dummy’s ribs locally at off-center locations where the RibEye light emitting diodes (LEDs) were positioned to capture the deformations at those locations. The high-severity condition aimed at loading the dummy at high speed in lateral and oblique directions similar to what is experienced by dummies in side impacts.

Results: In the low-severity tests, the peak deflections, in terms of length change, were approximately 15–20?mm, whereas for the high-severity cases the peak deflections were in the range of 30–40?mm for both IR-TRACC and RibEye cases.

Conclusions: For similar physical insults, dummies with the IR-TRACC and RibEye systems showed varying results for both length changes and the shoulder forces depending on the severity and direction of loading. Under purely lateral loading, the mid-length changes with the RibEye and the 1D IR-TRACC were comparable. In the oblique loading conditions, more differences were seen with the 2 systems depending on the impact direction. The shoulder forces consistently differed between the 2 systems. In the frontal oblique low-severity cases, the ribs pivoted along the spine end and the length change was not found to be a suitable parameter to quantify rib deformation in such loading scenarios.     

Assessment of biomass and lipid productivity and biodiesel quality of an indigenous microalga Chlorella sorokiniana MIC-G5

Generation of biodiesel from microalgae has been extensively investigated; however, its quality is often not suitable for use as fuel. Our investigation involved the evaluation of biodiesel quality using a native isolate Chlorella sorokiniana MIC-G5, as specified by American Society for Testing and Materials (ASTM), after transesterification of lipids with methanol, in the presence of sodium methoxide. Total quantity of lipids extracted from dry biomass, of approximately 410–450 mg g^?1 was characterized using FTIR and ¹H NMR. After transesterification, the total saturated and unsaturated fatty acid methyl esters (FAMEs) were 43% and 57%, respectively. The major FAMEs present in the biodiesel were methyl palmitate (C16:0), methyl oleate (C18:1), and methyl linoleate (C18:2), and the ¹H NMR spectra matched with criteria prescribed for high-quality biodiesel. The biodiesel exhibited a density of 0.873 g cm^–3, viscosity of 3.418 mm² s^?1, cetane number (CN) of 57.85, high heating value (HHV) of 40.25, iodine value of 71.823 g I₂ 100 g^?1, degree of unsaturation (DU) of 58%, and a cold filter plugging point (CFPP) of –5.22°C. Critical fuel parameters, including oxidation stability, CN, HHV, iodine value, flash point, cloud point, pour point, density, and viscosity were in accordance with the methyl ester composition and structural configuration. Hence, C. sorokiniana can be a promising feedstock for biodiesel generation.     

Groundwater Quality Monitoring in Shallow and Deep Aquifers in Saidabad Tahsil Area, Mathura District, India

Water availability in arid regions is both sporadic and highly variable in quantity. If the water quality shows large variations of salinity and concentration of other chemical constituents with depth and time span, it has considerable effect on the entire hydrological set up of the area. In the Saidabad tahsil area, the deep aquifers that supply water to borewells in the alluvial plain of the Mathura region, Uttar Pradesh, have higher salinity than those of the dugwells from the shallow aquifers. The excessive drilling of tubewells and high yield tubewells are resulting in deterioration of water quality of the shallow aquifers. On the contrary, the chemical constituents such as, Na⁺, K ⁺, Cl ^-, andHCO ₃ ^- show higher concentration in shallow aquifers than deep aquifers. A study carried out to monitor water quality in this region reveals that the groundwater quality varies with depth and time span in shallow and deep aquifers. Factors controlling variations in salinity and concentration of chemical constituents of the water in the two types of aquifers are discussed. The relative merits of the shallow water for potability are pointed out with respect to salinity concentrations and public health.     

Effects of technical and allocative inefficiencies on energy and nonenergy elasticities: an analysis of energy-intensive industries in China

Elasticity of substitution is traditionally estimated while ignoring technical and allocative inefficiencies, which could bias the estimates. We estimate elasticity of substitution for Chinese energy-intensive sectors by incorporating these inefficiencies. The results show most of the sectors are low substitutes between input factors and stress important differences among energy-intensive sectors. Concerning the cross-price elasticity for energy, with respect to capital (labor), the sectors are mainly characterized by weak substitutability or complementary. These imply the production structure is quite rigid and capital cannot be so readily used as a substitute for energy.     

Analysis of organic nitrogen removal in municipal wastewater by reverse osmosis

The results of a pilot study that was conducted to determine the total nitrogen removal by the reverse osmosis process are presented. The organic nitrogen removal rates are compared with removals observed from three full-scale reverse osmosis facilities and four pilot studies. The results of this analysis suggest that organic nitrogen removal is variable and that reverse osmosis may not consistently produce total nitrogen levels less than 1.0 mg/L without additional treatment. Three hypotheses to explain the variability in organic nitrogen removal in the different data sets are presented.     

Sources of submicron aerosol during fog-dominated wintertime at Kanpur

The main objective of this atmospheric study was to determine the major sources of PM₁ (particles having aerodynamic diameter <1.0 μm) within and near the city of Kanpur, in the Indo-Gangetic Plain. Day and night, 10 h long each, filter-based aerosol samples were collected for 4 months (November 2009 to February 2010) throughout the winter season. These samples were subjected to gravimetric and quantitative chemical analyses for determining water-soluble ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) using an ion chromatograph and trace elements using an inductively coupled plasma–optical emission spectrometer. The mean PM₁ mass concentrations were recorded as 114?±?71 μg/m³ (day) and 143?±?86 μg/m³ (night), respectively. A significantly higher diurnal contribution of ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) in PM₁ mass was observed during the fog-affected days and nights throughout the winter season, for which the average values were recorded as 38.09?±?13.39 % (day) and 34.98?±?12.59 % (night), respectively, of the total PM₁ mass. This chemical dataset was then used in a source-receptor model, UNMIX, and the model results are described in detail. UNMIX provided a maximum number of five source factors, including crustal material, composite vehicle, secondary aerosol, coal combustion, and iron/steel production and metallurgical industries, as the dominant air pollution sources for this study.     

Effectiveness of Treatment Technologies for Wastewater Pollution Generated by Indian Pulp Mills

India has a large number of paper manufacturing units, with mills varying in size of operations and type of product, scattered all over the length and breadth of the country. Present study deals with the survey of four different pulp and paper mills (Mill A, Mill B, Mill C and Mill D) in India, differing in their scale of operation as well as raw material usage. Physico-chemical characterization of wastewaters produced by different processing units like digestor house liquors, bleaching section, paper machine backwaters, combined inlet to the ETP and outlet to ETP, for all the four mills, was conducted. Different parameters like pH, Color, COD, BOD, percent Na, SAR, TDS and Total hardness were analyzed and compared. Highly significant differences were thus found between all the processing units of all four mills with p values < 0.01. This evaluation showed that though these mills have effluent treatment facilities installed in their premises, improvements are still needed to increase their efficiencies for treating the discharged wastewaters.