Phytoplankton community structure in relation to environmental factors from the New Mangalore Port waters along the southwest coast of India

Seasonal and spatial phytoplankton distribution in relation to environmental factors was investigated in New Mangalore Port, a major port along the west coast of India. A well-mixed water column characterized the non-monsoon seasons, whereas it was weakly stratified during monsoon. Water quality index (TRIX) scores indicated good water quality except during pre-monsoon (inner zone surface) and monsoon (near bottom waters). Surface abundance of tychopelagic diatoms (Paralia sulcata, Melosira nummuloides, Cylindrotheca closterium, and Nitzschia sigma) was higher during non-monsoon seasons. Certain centric diatoms, e.g., Leptocylindrus danicus, P. sulcata, and Rhizosolenia imbricata, dominated during pre-monsoon (inner zone) and positively correlated with TRIX. High Skeletonema costatum and dinoflagellate abundance during the monsoon season coincided with high nutrient concentrations. Five potential toxic and fourteen harmful/bloom forming algal species were encountered at abundances below the level that can be considered as harmful to the ecosystem. In addition to a baseline database, this study highlights the potential use of certain diatom species as indicators of hydrography and water quality for monitoring dynamic coastal marine ecosystems.     

Heterogeneous photocatalysis for removal of microbes from water

Increasing water pollution by microbes has become a source of serious health concern across the globe. Production of potentially carcinogenic disinfection by-products has marred credibility of traditional water purification techniques like chlorination. Photocatalysis has emerged as a promising alternative technique for the disinfection of water with minimal risk of harmful by-products. The process involves a wide band gap semiconductor material which, upon irradiation of light, produces electrons and holes with high redox potential to degrade organic contaminants and microbes. In this review, we analyze the research trends in photocatalytic inactivation of water borne microorganisms. This report analyzes the major factors that affect the disinfection efficiency using this process. The discussion also includes plausible mechanisms of microbial degradation as well as a kinetic model of the inactivation process. Different approaches, like doping of semiconductors or energy band engineering or plasmon coupling, have been reported for the enhancement and utilization of ambient solar light. Photocatalysis could be a cost-effective and environmentally friendly water purification technique though further research is required to enhance its efficiency with the use of solar light.     

Biodegradation of mono-chlorobenzene by using a trickle bed air biofilter (TBAB)

In the present study, performance of the trickle bed airbiofilter (TBAB) for treating mono-chlorobenzene (MCB) was evaluated for various influent volatile organic compound (VOC) loadings using coal and mixed consortium of activated sludge as the packing material. Microbial acclimation to MCB was achieved by exposing the system continuously for 31 d to an average inlet MCB concentration of 0.688 g m(-3) at an empty bed residence time (EBRT) of 188 s. The TBAB achieved maximum removal efficiency of 87% at an EBRT of 188 s for an inlet concentration of 0.681 g m(-3), which is quite significance than the values reported in the literature. Elimination capacities of MCB increased with an increase of the influent VOC loading, but an opposite trend was observed for the removal efficiency The maximum elimination capacity of the biofilter was 110.75 g m(-3) hr(-1) at an inlet MCB concentration of 1.47 g m(-3). The effect of starvation on the TBAB was also studied. After starvation, the TBAB lost its ability to degrade MCB initially However the biofilter recovered very quickly Evaluation of the concentration profile along the bed height indicated that the bottom section of TBAB has the best performance for all concentrations. By using Wani's method of macrokinetic determination based on simple Monod kinetics, the maximum removal rate of MCB, r(max) and saturation constant K(m) was to be found as 1.304 g m(-3)s(-1) and 113.446 g m(-3), respectively.     

Vitamin E-mediated protection on methomyl-induced alterations in rat liver

The present study was carried out to observe the possible beneficial effects of Vitamin E, a natural antioxidant on methomyl-induced biochemical and histological alterations in rat liver. To carry out the investigations, animals were segregated in four different groups. Animals in Group I served as normal controls. Animals in Group II were given single methomyl dose orally in water (9 mg kg^?1 b.wt). Animals in Group III were injected intraperitoneally with Vitamin E (50 mg kg^?1 b.wt) for 1 week on alternate days. Animals in Group IV were administered Vitamin E 1 week before subjecting them to methomyl treatment. Animals in all the groups were sacrificed 24 h after the end of treatments. Different biochemical estimations were carried out, which included estimation of aspartate aminotransaminase (AST), alanine aminotransaminase (ALT), alkaline phosphatase (ALP) and acetylcholinesterase (AChE). Further, to examine the oxidative damage lipid peroxidation (LPO) and glutathione (GSH) levels as well as antioxidant enzymes such as superoxide dismutase (SOD), catalase, glutathione-S-transferase (GST), glutathione reductase (GR), glutathione peroxidase (GSHPx), and glutathione-6-phosphate dehydrogenase were estimated in liver samples. AchE activity was inhibited significantly both in serum and liver following methomyl treatment. Administration of methomyl caused a significant increase in serum AST, ALT and ALP which indicated hepatic damage. LPO was found to be significantly increased, whereas GSH levels were decreased in the liver of methomyl-treated animals. The activities of SOD and catalase were significantly decreased whereas GST and GSHPx activities were found to be elevated significantly following methomyl treatment. No significant change in the enzyme activity of GR and glutathione-6-phosphatase dehydrogenase was observed after methomyl treatment. Vitamin E supplementation was able to attenuate appreciably the methomyl-induced changes in LPO levels along with SOD and GST activities. Histopathological studies following methomyl treatment revealed that hepatocytes, were not very well delineated and nuclei showed degenerative changes. Whereas, following Vitamin E supplementation in combined treatment group nuclei showing degenerative changes become less in number. The study, therefore, concludes that Vitamin E has a potential in mitigating most of the adverse effects induced by methomyl acute toxicity.     

Effect of fluid concentration in titanium machining with an atomization-based cutting fluid (ACF) spray system

The aim of this work is to investigate the effect of metal-working fluid (MWF) concentration on the machining responses including tool life and wear, cutting force, friction coefficient, chip morphology, and surface roughness during the machining of titanium with the use of the ACF spray system. Five different concentrations from 5 to 15% of a water-soluble metalworking fluid (MWF) were applied during turning of a titanium alloy, Ti–6Al–4V. The thermo-physical properties such as viscosity, surface tension and thermal conductivity of these concentrations were also measured. The test results demonstrate that the tool life first extends with the increase in MWF concentration and then drops with further increase. At low concentration (e.g., 5%), a lack of the lubrication effect causes to increase in a higher friction at the tool–chip interface resulting in severe chipping and tool nose/flank wear within a short machining time. On the other hand, at high concentration, the cooling effect is less. This increases cutting temperature and a faster thermal softening/chipping/notching of the tool material and higher friction at the tool–chip–workpiece interaction zones resulting in early tool failure. A good balance between the cooling and the lubrication effects seems to be found at the 10% MWF concentration as it offers the best machining performance. However, machining with flood coolant is observed to perform the best in the range of 5–7%.     

Prediction models for psychophysical lifting capabilities and the resulting physiological responses for work shifts of varied durations

This paper presents models for predicting estimates of maximum weights of lift acceptable to industrial workers for 8-hour work shifts. Prediction models are also presented for heart rate and oxygen uptake at the maximum acceptable weight of lift. Experimental data collected on 37 males and 37 females were used in developing and verifying these models. Each subject performed nine variations of a lifting task involving three heights, four frequencies, and three box sizes to determine estimates of acceptable lifts for 8-hour shifts. The final lifting capability prediction models explained 76 to 82% variance in the experimental data. A procedure is also described to determine, from these models, acceptable lifts for work periods of variable lengths. The physiological-response-prediction models, which provide estimates of heart rate and oxygen uptake at the maximum acceptable weight of lift, were, however, relatively inferior to other similar response models available in the literature. This is thought to be due to the differences between the psychophysical and physiological methodologies.     

Fly ash bricks development using concrete waste debris and self-healing bacteria

Journal of Material Cycles and Waste Management - In this study, an effort has been made to use concrete waste debris for the manufacturing of fly ash bricks as a sustainable material. Though in...     

Impact of long-term wastewater application on microbiological properties of vadose zone

Impact of wastewater irrigation on some biological properties was studied in an area where treated sewage water is being supplied to the farmers since 1979 in the western part of National Capital Territory of New Delhi under Keshopur Effluent Irrigation Scheme. Three fields were selected which had been receiving irrigation through wastewater for last 20, 10 and 5 years. Two additional fields were selected in which the source of irrigation water was tubewell. The soil bacterial and fungal population density was studied in soil layers of 0?C15, 15?C30, 30?C60 and 60?C120 cm depths. Groundwater samples were collected from the piezometers installed in the field irrigated with sewage water for last 20, 10 and 5 years. Results indicate that there was significant increase in bacterial and fungal count in sewage-irrigated soils as compared to their respective control. The population density of bacteria and fungi in waste water-irrigated soils increased with the duration of sewage water application and decreased with increasing depth. The bacterial and fungal count was also directly proportional to organic carbon, sand and silt content and negatively correlated to the clay content, electrical conductivity, pH and bulk density of the soil. Groundwater under sewage-irrigated fields had higher values of most probable number (MPN) index as compared to that of tubewell water-irrigated fields. All the shallow and deep groundwaters were found to be contaminated with faecal coliforms. The vadose zone had filtered the faecal coliform to the tune of 98?C99%, as the MPN index was reduced from ??18,000 per 100 ml of applied waste water to 310 per 100 ml of groundwater under 20 years sewage-irrigated field. The corresponding values of MPN were 250 and 130 per 100 ml of shallow groundwater under 10 and 05 years sewage-irrigated fields, respectively. Rapid detection of faecal contamination suggested that the Citrobacter freundii and Salmonella were dominant in shallow groundwater, while Escherichia coli was dominant in deep groundwater collected from sewage-irrigated field.     

Environmental management plan (EMP) for Melamchi water supply project, Nepal

More than 1.5 million people live in the Kathmandu valley. The valley is facing an extreme shortage of water supply. At the same time the demand is escalating rapidly. To address this issue of scarcity of water, the government of Nepal has proposed a project of inter-basin transfer of water from Melamchi River located 40 km north-east of the Kathmandu valley. The project will cover two districts and three municipalities and will potentially have significant impacts on the environment. In accordance with the Environmental Protection Regulation of Nepal (1997), the Melamchi Water Supply Project (MWSP) has undergone an EIA during the feasibility study stage of the proposed project. The recommendations contained in the EIA were integrated into the project design for implementation in 2006. This paper summarizes the background of MWSP, the environmental concerns described in the EIA and the status of Environmental Management Plan (EMP) developed to address environmental compliance and other issues involving participation and support of the local people. This paper also provides some lessons to learn on the modalities of addressing the demands and grievances of the local people concerning environmental management.     

Possible maternal offloading of metals in the plasma,uterine and capsule fluid of pregnant ragged-tooth sharks (Carcharias taurus) on the east coast of South Africa

Environmental Science and Pollution Research - We studied the possible metal offloading onto the progeny of three pregnant female ragged-tooth sharks (Carcharias taurus) (C. taurus). The presences...