Biodegradation of Pro-oxidant Filled Polypropylene Films and Evaluation of the Ecotoxicological Impact

The biodegradability of calcium stearate (CaSt) and cobalt stearate (CoSt) filled polypropylene (PP) films were investigated in this work. The PP films were prepared using melt blending technique followed by hot press moulding. On the basis of their tensile properties, the optimum amount of pro-oxidants was taken as 0.2 phr. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for the characterization of optimized films. Presence of pro-oxidant in the PP was confirmed by the FTIR studies. Addition of pro-oxidants in the films decreased the thermal stability as revealed by TGA analysis. Crystallinity of the pro-oxidant filled PP decreased with addition of pro-oxidants as showen by DSC. The maximum biodegradation of CaSt and CoSt containing PP films was showen 7.65 and 8.34%, respectively with 0.2 phr. Both the microbial test and plant growth test (on corn and tomato) indicated that biodegradation intermediates were non toxic.     

Challenges of small protected areas in urban cities: a case study of Okhla Bird Sanctuary,India

Protected areas have been earmarked throughout the world for the purpose of conserving the biodiversity. The protected areas are facing serious threats due to rapid urban growth, especially in the developing countries like India. The current threats and impacts of urbanization on the Okhla Bird Sanctuary (Delhi, India) have been presented in this paper as a case in point. Uncontrolled urbanization and the lack of policy implementation have been identified as one of the major contributors to incessant biodiversity loss in India and other countries. In addition, a possible management framework for a smaller protected area in an urban setting is presented in brief.     

Assessment of risk factors in forest road design and construction activities with fuzzy analytic hierarchy process approach in Turkey

Forest road design and construction are time-consuming and complicated because various risk factors can be encountered during the process. The aim of this study is to comprehensively assess the risk factors in forest road design and construction using the fuzzy analytic hierarchy process (AHP) method in Turkey, thus contributing to the proper performance of these activities. Within the scope of the study, six main risk factors and 22 sub-risk factors were identified based on literature review. In order to determine the weights of the relevant risk factors, the opinions of three different groups [(group 1: academicians), (group 2: forest engineers (private sector employees + public sector employees)), (group 3: group 1 + group 2)] about the risk factors were obtained. Relevant risk factor weights were determined using the fuzzy AHP method. According to group 3, the most important main risk factors are technical risks and environmental risks. In addition, the most important sub-risk factors for each relevant main risk factor were incorrect road alignment, inadequate work safety in the field, insufficient capital, legal problems on the road alignment, landslide risk during road construction, and illegal logging. Differences were observed between groups 1 and 2 in the weight rankings of relevant risk factor. The results demonstrate that the fuzzy AHP method can be used effectively to assess the risks of forest road design and construction.     

Groundwater Quality Monitoring in Shallow and Deep Aquifers in Saidabad Tahsil Area, Mathura District, India

Water availability in arid regions is both sporadic and highly variable in quantity. If the water quality shows large variations of salinity and concentration of other chemical constituents with depth and time span, it has considerable effect on the entire hydrological set up of the area. In the Saidabad tahsil area, the deep aquifers that supply water to borewells in the alluvial plain of the Mathura region, Uttar Pradesh, have higher salinity than those of the dugwells from the shallow aquifers. The excessive drilling of tubewells and high yield tubewells are resulting in deterioration of water quality of the shallow aquifers. On the contrary, the chemical constituents such as, Na⁺, K ⁺, Cl ^-, andHCO ₃ ^- show higher concentration in shallow aquifers than deep aquifers. A study carried out to monitor water quality in this region reveals that the groundwater quality varies with depth and time span in shallow and deep aquifers. Factors controlling variations in salinity and concentration of chemical constituents of the water in the two types of aquifers are discussed. The relative merits of the shallow water for potability are pointed out with respect to salinity concentrations and public health.     

Persistence and risk assessment of spiromesifen on tomato in India: a multilocational study

Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg^?1, while the limit of determination was 0.015 mg kg^?1. Residues were found below the LOQ of 0.05 mg kg^?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg^?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment.     

Emissions of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (PCBs) to air from waste incinerators and high thermal processes in India

This study investigated dioxins and dioxin-like polychlorinated biphenyls in gasses emitted from waste incinerators and thermal processes in central and western parts of India. The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs) ranged from 0.0070 to 26.8140 ng toxicity equivalent (TEQ)/Nm³, and those of dioxin-like polychlorinated biphenyls (PCBs) ranged from 0.0001?×?10^?1 to 0.0295 ng TEQ/Nm³. The characteristics of mean PCDD/F I-TEQ concentration and congener profiles were studied over all the samples of air. In particular, a pattern consisting of a low proportion of dioxin-like PCBs and high proportion of PCDDs/DFs was common for all the samples from incinerators and high-temperature processes.     

Effects of technical and allocative inefficiencies on energy and nonenergy elasticities: an analysis of energy-intensive industries in China

Elasticity of substitution is traditionally estimated while ignoring technical and allocative inefficiencies, which could bias the estimates. We estimate elasticity of substitution for Chinese energy-intensive sectors by incorporating these inefficiencies. The results show most of the sectors are low substitutes between input factors and stress important differences among energy-intensive sectors. Concerning the cross-price elasticity for energy, with respect to capital (labor), the sectors are mainly characterized by weak substitutability or complementary. These imply the production structure is quite rigid and capital cannot be so readily used as a substitute for energy.     

Analysis of organic nitrogen removal in municipal wastewater by reverse osmosis

The results of a pilot study that was conducted to determine the total nitrogen removal by the reverse osmosis process are presented. The organic nitrogen removal rates are compared with removals observed from three full-scale reverse osmosis facilities and four pilot studies. The results of this analysis suggest that organic nitrogen removal is variable and that reverse osmosis may not consistently produce total nitrogen levels less than 1.0 mg/L without additional treatment. Three hypotheses to explain the variability in organic nitrogen removal in the different data sets are presented.     

Sources of submicron aerosol during fog-dominated wintertime at Kanpur

The main objective of this atmospheric study was to determine the major sources of PM₁ (particles having aerodynamic diameter <1.0 μm) within and near the city of Kanpur, in the Indo-Gangetic Plain. Day and night, 10 h long each, filter-based aerosol samples were collected for 4 months (November 2009 to February 2010) throughout the winter season. These samples were subjected to gravimetric and quantitative chemical analyses for determining water-soluble ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) using an ion chromatograph and trace elements using an inductively coupled plasma–optical emission spectrometer. The mean PM₁ mass concentrations were recorded as 114?±?71 μg/m³ (day) and 143?±?86 μg/m³ (night), respectively. A significantly higher diurnal contribution of ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) in PM₁ mass was observed during the fog-affected days and nights throughout the winter season, for which the average values were recorded as 38.09?±?13.39 % (day) and 34.98?±?12.59 % (night), respectively, of the total PM₁ mass. This chemical dataset was then used in a source-receptor model, UNMIX, and the model results are described in detail. UNMIX provided a maximum number of five source factors, including crustal material, composite vehicle, secondary aerosol, coal combustion, and iron/steel production and metallurgical industries, as the dominant air pollution sources for this study.