Biological monitoring of chlorpyrifos exposure to rice farmers in Vietnam

Chlorpyrifos is the most common organophosphate insecticide registered for use in Vietnam and is widely used in agriculture, particularly rice farming. However, chlorpyrifos exposure to and adverse effects on farmers has not been evaluated. In this study, biological monitoring of chlorpyrifos exposure in a group of rice farmers was conducted after a typical application event using back-pack spraying.Urine samples (24 h) were collected from the rice farmers before and post insecticide application. Samples were analysed for 3,5,6-trichloropyridinol (TCP), the major urinary metabolite of chlorpyrifos, using an enzymatic pre-treatment before extraction followed by HPLC-MS/MS. Absorbed Daily Dose (ADD) of chlorpyrifos for farmers were then estimated from urinary TCP levels, expressed as μg g⁻¹ creatinine. The analytical method for urinary TCP had a low detection limit (0.6 μg L⁻¹), acceptable recovery values (80-114%), and low relative percentage differences in duplicate and repeated samples.Post-application chlorpyrifos ADD of farmers varied from 0.4 to 94.2 μg kg⁻¹ (body weight) d⁻¹ with a mean of 19.4 μg kg⁻¹ d⁻¹ which was approximately 80-fold higher than the mean baseline exposure level (0.24 μg kg⁻¹ d⁻¹). Hazard Quotients (ratio of the mean ADD for rice farmers to acute oral reference dose) calculated using acute oral reference doses recommended by United States and Australian agencies varied from 2.1 (Australian NRA), 4.2 (US EPA) to 6.9 (ATSDR).Biological monitoring using HPLC-MS/MS analysis of urinary TCP (24 h) was found to be an effective method for measuring chlorpyrifos exposure among farmers. This case study found that Vietnamese rice farmers had relatively high exposures to chlorpyrifos after application, which were likely to have adverse health effects.     

Hg Vapor Emission from Broken Compact Fluorescent Lamps (CFLs) in an Acrylic Chamber

The United States Environmental Protection Agency/Environmental Response Team (US EPA/ERT), in collaboration with St. John's College, Dr. B. R. Ambedkar University, Agra, India, is conducting a study to determine Hg vapor emission rates resulting from broken compact fluorescent lamps (CFLs) in a residential setting. The overall objectives of the study are to determine Hg vapor emission data and provide homeowners with cleanup procedures and disposal options for broken CFLs. Most of the currently available CFLs in the US market are manufactured in China for US companies. Several different types of CFLs were purchased from local stores and their Hg content was determined. Based on previous studies, such as the 2011 study by Singhvi and colleagues, five popular spiral CFLs were selected for emission studies in an acrylic chamber. This study found that Hg vapor emissions from CFLs may be significantly greater than those from beads of liquid Hg with weights comparable to the Hg content of the CFLs. The average 24-hour Hg loss into the atmosphere from CFLs broken on a plastic surface ranged from 0.6% to 22% of the bulb content, while that for CFLs broken on carpet ranged from 2.6% to 28%. Projections for a 12 foot × 9.33 foot × 8 foot (25.4 m³) room based on the chamber measurements in this study indicate that CFL breakage in some household settings may produce 24-hour Hg concentrations above the 2000 Agency for Toxic Substances and Disease Registry (ATSDR) minimum risk level (MRL) of 0.2 μg/m³, for typical air exchange rates. This study also indicates that Hg emission may not be proportional to exposed surface area based on experiments using liquid Hg with different surface areas.     

Evaluation of heavy metal contaminants in prepared noodles: source allocation and health risk assessment

Environmental Science and Pollution Research - In recent years, special attention has been given to emission research that led to the deposition of toxicants from road traffic. Thus, it is...     

Urban soil quality of Raipur,Chhattisgarh, India

Soil quality in urban areas in India is degraded due to multiple anthropogenic activities. The objectives of this work are to determine the concentration variations, toxicity, and sources of carbons, metals, and ions in the surface soil of Raipur, the industrialized capital city of Chhattisgarh state, India. High concentrations of Al, K, Ca, Ti, Fe, and elemental carbon (EC) were registered. Relatively lower concentrations of V, Cr, Mn, Ni, Cu, Zn, Sr, Ba, Pb, organic carbon (OC), and carbonate carbon (CC), as well as ions (viz. F^–, Cl^–, NO₃^–, SO₄^2–, Na⁺, K⁺, Mg²⁺, and Ca²⁺), were also recorded. EC was found to be one of the major pollutants, although enrichment factors pointed to high contamination with SO₄^2–, K⁺, Mg²⁺_, Cr, Mn, and Pb; and extreme contamination with NO₃^– and Ca²⁺. The spatial and temporal variations, enrichment factors, toxicity, and sources of the chemical species detected in the soil are discussed.     

Occupational noise exposure and hearing loss among pulse processing workers

Occupational noise exposure and noise-induced hearing loss (NIHL) has been recognised as a problem among workers in Indian industries. The major industries in India are based on the processing of agricultural products. There are appreciable numbers of pulse processing units spread throughout the country. The purpose of this study was to determine the prevalence of hearing loss among pulse processing workers. As a part of hearing protection intervention, audiometric tests were conducted at the binaural low (250–1,500 Hz), the binaural mid (1,500–4,000 Hz) and the binaural high (3,000–8,000 Hz) frequency averages. The prevalence of hearing loss was determined based on hearing threshold levels (HTLs) with a low fence of 25 dB. Over 50% of pulse processing workers (dana bazaar and dal mill) showed hearing loss in the noise-sensitive higher (binaural mid and high) frequencies. The rate of hearing loss was particularly high among workers in the dal mill. The analyses show a higher risk of prevalence of hearing loss among the dal mill workers compared to the workers associated with the grain preprocessing activities. The study shows alarming signals of NIHL, especially in the dal mill workers. The occupational exposure to noise could be minimised by efficient control measures through engineering controls, administrative controls and the use of personal protective devices. Applications of engineering and/or administrative controls are frequently not feasible in developing countries for technical and financial reasons. A complete hearing conservation programme, including training, audiometry and the use of hearing protection devices, is the most feasible method for the protection of industrial workers from prevailing noise in workplace environments in the developing countries.     

Forests and societal values: comparing scientific and public perception of forest health

This study examines the common ground between lay people and scientists regarding forest values and definitions of forest health. With the forest at Pinery Provincial Park, Ontario, as a case study, the authors compared six ecological indicators to determine which were sensitive to the multiple impacts of visitor use, deer browsing and fire suppression. Plant cover and proportion native species were sensitive to these impacts. Sapling height was greater in low deer density areas. The authors also conducted focused discussions with local interest groups, followed by qualitative data analysis. Overall, there was good convergence between scientific and public views of forests and forest health, although this may partly be due to the groups' interest in nature and the Pinery. Subjects saw a connection between their health and the state of the global and local environment, including forests. There is a need for increased awareness in the public to the necessity of managing high deer populations in parks to protect other forest components such as biodiversity. Forest managers must consider that people greatly value forests near them for mental well being. Group responses suggested that messages explicitly linking forest benefits to human health and well being may motivate people to protect forests.     

Evaluation of Three Air Dispersion Models: ISCST2, ISCLT2, and Screen2 for Mercury Emissions in an Urban Area

The goal of this paper is to compare and evaluate the performance of three air quality regulatory models for mercury releases. The models include Industrial Source Complex Short Term model (ISCST2), Industrial Source Complex Long Term model (ISCLT2), and SCREEN2. The evaluation is conducted in multiple point source urban environment using meteorological data, emission inventory and monitoring data for eight stations for the year 1990 to 1992. The performance of the models is evaluated using eight statistical parameters. The comparison of models results for both quarterly and annual averaging periods shows that ISCST2 predictions qualitatively match the observed concentrations; whereas SCREEN2 predicts highest concentrations and ISCLT2 the lowest concentrations. The summary of statistical analysis obtained by using three different methods of observed concentration (Co) and predicted concentrations (Cp) comparison show that the ISCST2 has a better overall performance than ISCLT2 and SCREEN2 models. However, none of the models met the criteria for a reasonable model. Summaries of 95% confidence limits on normalize mean square error (NMSE), geometric mean variance (VG) and geometric mean bias (MG) for each and among model indicate that of the three models, ISCST2 has the best overall performance indicators. Improved model performance may be achieved by incorporating different types of mercury forms into emission rate and air dispersion calculations.     

Short-term Emissions of Ammonia and Carbon Dioxide from Cattle Urine Contaminated Tropical Grassland Microcosm

The study was designed to understand the emissions of ammonia (NH₃) and carbon dioxide (CO₂) from a single cattle urination event on a tropical grassland and underline the significance of the emissions in the context of huge animal population grazing on large pasture areas in some countries. Emissions of ammonia (NH₃) and carbon dioxide (CO₂) were monitored for three weeks from a tropical grassland (dominated by Cynodon dactylon Pers.) microcosm contaminated with cow and buffalo urine. The grassland microcosms were treated with urine (50 and 100 ml of each) only once and irrigated with water once every week. Ammonia was sampled by an automatic sampling system comprising of a vacuum pump, three-way stopcocks and rubber tubing and an impinger containing suitable absorbing solution (H₂SO₄), connected to the tubing suitably. The sampled gas, after sucked by the vacuum pump and absorbed in H₂SO₄, was allowed to enter the closed microcosm again maintaining internal pressure of the microcosm. Carbon dioxide was sampled by absorption in an alkali (NaOH) trap inside the microcosm. Both NH₃ and CO₂ emissions were highly variable temporally and there was no continuous increasing or decreasing emission trend with time. Respectively, 45 and 46% of total NH₃-N were emitted within first 48 h from 50 and 100 ml cow urine application while the corresponding values for buffalo urine were 34 and 32%. Total NH₃-N emissions, integrated for sampling days (i.e. 1, 2, 3, 4, 6, 15, 18 and 21st) were 11 and 6% in cow and 8 and 5% in buffalo urine, of the total-N added through 50 and 100 ml urine samples. Carbon dioxide emissions were standardized at 25 ^∘C by using a suitable formula which were lower than actual emissions at actual soil temperature (> 25 ^∘C). Carbon dioxide emission rates were classified on the basis of soil repiratory classification and classes ranged from moderately low soil activity up to unusually high soil activity, the latter observed only on very few sampling days. Grasses in the microcosm had shown appreciable growth after urine application. Although variable and somewhat unpredictable, emissions were appreciable and that too only from a patch of single urination, indicating to the huge magnitude of total emissions under the scenario of thousands of cattle grazing on hundreds of acres of grasslands in a tropical country.     

Development of a novel myconanomining approach for the recovery of agriculturally important elements from jarosite waste

In this study, an ecofriendly and economically viable waste management approach have been attempted towards the biosynthesis of agriculturally important nanoparticles from jarosite waste. Aspergillus terreus strain J4 isolated from jarosite(waste from Debari Zinc Smelter,Udaipur, India), showed good leaching efficiency along with nanoparticles(NPs) formation under ambient conditions. Fourier-transform infrared spectroscopy(FT-IR) and transmission electron microscopy(TEM) confirmed the formation of NPs. Energy dispersive X-ray spectroscopy(EDX analysis) showed strong signals for zinc, iron, calcium and magnesium,with these materials being leached out. TEM analysis and high resolution transmission electron microscopy(HRTEM) showed semi-quasi spherical particles having average size of 10‐50 nm. Thus, a novel biomethodology was developed using fungal cell-free extract for bioleaching and subsequently nanoconversion of the waste materials into nanostructured form. These biosynthesized nanoparticles were tested for their efficacy on seed emergence activity of wheat(Triticum aestivum) seeds and showed enhanced growth at concentration of 20 ppm. These nanomaterials are expected to enhance plant growth properties and being targeted as additives in soil fertility and crop productivity enhancement.