Child passenger restraint use and emergency department--reported injuries: a special study using the National Electronic Injury Surveillance System-All Injury Program, 2004

INTRODUCTION: In 2004, more than 180,000 child passengers aged 相似文献   

Macroalgal Introductions by Hull Fouling on Recreational Vessels: Seaweeds and Sailors

Macroalgal invasions in coastal areas have been a growing concern during the past decade. The present study aimed to assess the role of hull fouling on recreational yachts as a vector for macroalgal introductions. Questionnaire and hull surveys were carried out in marinas in France and Spain. The questionnaires revealed that the majority of yacht owners are aware of seaweed introductions, usually undertake short range journeys, dry dock their boat at least once a year, and use antifouling paints. The hull survey showed that many in-service yachts were completely free of macroalgae. When present, fouling assemblages consisted mainly of one to two macroalgal species. The most commonly found species was the tolerant green seaweed Ulva flexuosa. Most of the other species found are also cosmopolitan and opportunistic. A few nonnative and potentially invasive Ceramiales (Rhodophyta) were found occasionally on in-service yachts. On the basis of the information gathered during interviews of yacht owners in the surveyed area, these occurrences are likely to be uncommon. However they can pose a significant risk of primary or secondary introductions of alien macroalgal species, especially in the light of the increase in yachting activities. With large numbers of recreational yachts and relatively rare occurrences of nonnative species on hulls, comprehensive screening programs do not seem justified or practical. The risks of transferring nonnative species may, however, be minimized by encouraging the behaviors that prevent fouling on hulls and by taking action against neglected boats before they can act as vectors.     

A Template for Integrated Community Sustainability Planning

This article describes a template for implementing an integrated community sustainability plan. The template emphasizes community engagement and outlines the components of a basic framework for integrating ecological, social and economic dynamics into a community plan. The framework is a series of steps that support a sustainable community development process. While it reflects the Canadian experience, the tools and techniques have applied value for a range of environmental planning contexts around the world. The research is case study based and draws from a diverse range of communities representing many types of infrastructure, demographics and ecological and geographical contexts. A critical path for moving local governments to sustainable community development is the creation and implementation of integrated planning approaches. To be effective and to be implemented, a requisite shift to sustainability requires active community engagement processes, political will, and a commitment to political and administrative accountability, and measurement.     

U.S. Natural Resources and Climate Change: Concepts and Approaches for Management Adaptation

Public lands and waters in the United States traditionally have been managed using frameworks and objectives that were established under an implicit assumption of stable climatic conditions. However, projected climatic changes render this assumption invalid. Here, we summarize general principles for management adaptations that have emerged from a major literature review. These general principles cover many topics including: (1) how to assess climate impacts to ecosystem processes that are key to management goals; (2) using management practices to support ecosystem resilience; (3) converting barriers that may inhibit management responses into opportunities for successful implementation; and (4) promoting flexible decision making that takes into account challenges of scale and thresholds. To date, the literature on management adaptations to climate change has mostly focused on strategies for bolstering the resilience of ecosystems to persist in their current states. Yet in the longer term, it is anticipated that climate change will push certain ecosystems and species beyond their capacity to recover. When managing to support resilience becomes infeasible, adaptation may require more than simply changing management practices—it may require changing management goals and managing transitions to new ecosystem states. After transitions have occurred, management will again support resilience—this time for a new ecosystem state. Thus, successful management of natural resources in the context of climate change will require recognition on the part of managers and decisions makers of the need to cycle between “managing for resilience” and “managing for change.”     

A Tool for Automated Load Duration Curve Creation1

Abstract: A recent study by the Texas Bacteria Total Maximum Daily Load (TMDL) Task Force has recommended the use of load duration curves as a primary tool in calculating bacterial TMDLs. This method is attractive because it effectively integrates flow regimes into TMDL analyses, clearly communicates data through a method that is understandable to the general public, and has been successfully applied in TMDL studies in other states. To ease the creation of load duration curves, an automated load duration curve creation tool called LDCurve has been created within a Microsoft Excel framework. Web services and a webscraper are used to retrieve U.S. Geological Survey streamflow data and Texas Commission on Environmental Quality water quality data. Data are imported to the spreadsheet, combined to create flow and load duration curves, and plotted. Final steps result in a preliminary estimate of the overall load reductions needed to meet water quality standards in the modeled segment. LDCurve is currently only applicable in the state of Texas, but may be updated to model water quality throughout the nation using analogous web services from the EPA STORET database. By using automated data retrievals and computations, the LDCurve tool reduces the amount of time required to create curves and calculate load reductions to a matter of minutes. LDCurve and all supporting materials are available online for free download at: http://tools.crwr.utexas.edu/LDCurve/ .     

The Watershed Deposition Tool: A Tool for Incorporating Atmospheric Deposition in Water‐Quality Analyses1

Abstract: A tool for providing the linkage between air and water‐quality modeling needed for determining the Total Maximum Daily Load (TMDL) and for analyzing related nonpoint‐source impacts on watersheds has been developed. Using gridded output of atmospheric deposition from the Community Multiscale Air Quality (CMAQ) model, the Watershed Deposition Tool (WDT) calculates average per unit area and total deposition to selected watersheds and subwatersheds. CMAQ estimates the wet and dry deposition for all of its gaseous and particulate chemical species, including ozone, sulfur species, nitrogen species, secondary organic aerosols, and hazardous air pollutants at grid scale sizes ranging from 4 to 36 km. An overview of the CMAQ model is provided. The somewhat specialized format of the CMAQ files is not easily imported into standard spatial analysis tools. The WDT provides a graphical user interface that allows users to visualize CMAQ gridded data and perform further analyses on selected watersheds or simply convert CMAQ gridded data to a shapefile for use in other programs. Shapefiles for the 8‐digit (cataloging unit) hydrologic unit code polygons for the United States are provided with the WDT; however, other user‐supplied closed polygons may be used. An example application of the WDT for assessing the contributions of different source categories to deposition estimates, the contributions of wet and dry deposition to total deposition, and the potential reductions in total nitrogen deposition to the Albemarle‐Pamlico basin stemming from future air emissions reductions is used to illustrate the WDT capabilities.     

Simulated effects of sulfur deposition on nutrient cycling in class I wilderness areas

We predicted the effects of sulfate (SO(4)) deposition on wilderness areas designated as Class I air quality areas in western North Carolina using a nutrient cycling model (NuCM). We used three S deposition simulations: current, 50% decrease, and 100% increase. We measured vegetation, forest floor, and root biomass and collected soil, soil solution, and stream water samples for chemical analyses. We used the closest climate stations and atmospheric deposition stations to parameterize NuCM. The areas were: Joyce Kilmer (JK), Shining Rock (SR), and Linville Gorge (LG). They differ in soil acidity and nutrients, and soil solution and stream chemistry. Shining Rock and LG have lower soil solution base cation and higher acidic ion concentrations than JK. For SR and LG, the soil solution Ca/Al molar ratios are currently 0.3 in the rooting zone (A horizon), indicating Al toxicity. At SR, the simulated Ca/Al ratio increased to slightly above 1.5 after the 30-yr simulation regardless of S deposition reduction. At LG, Ca/Al ratios ranged from 1.6 to 2.4 toward the end of the simulation period, the 100% increase scenario had the lower value. Low Ca/Al ratios suggest that forests at SR and LG are significantly stressed under current conditions. Our results also suggest that SO(4) retention is low, perhaps contributing to their high degree of acidification. Their soils are acidic, low in weatherable minerals, and even with large reductions in SO(4) and associated acid deposition, it may take decades before these systems recover from depletion of exchangeable Ca, Mg, and K.     

Drivers and barriers to water transfer in a New Zealand irrigation scheme

Policy makers, economists and water researchers have advocated water transfer and trade as a key potential response to worldwide water scarcity and/or efficiency problems. This paper examines aspects of an operational irrigation scheme in New Zealand that enables transfer of water between shareholders, arguing that the set-up and processes involved with the scheme can provide a wider context for analysis and consideration of social and cultural issues involved with resource allocation. Analysis of the key drivers and barriers for water reveal that while there is potential for real benefits from transferring water for farmers and the community, an examination of some of the processes used, and barriers to transfer reveals important lessons for planning and regulatory perspectives, including the importance of looking at the issues from a procedural and distributive justice viewpoint.     

Contamination from electrically conductive silicone tubing during aerosol chemical analysis

Electrically conductive silicone tubing is used to minimize losses in sampling lines during the analysis of airborne particle size distributions and number concentrations. We report contamination from this tubing using gas chromatography–mass spectrometry (GC–MS) of filter-collected samples as well as by particle mass spectrometry. Comparison of electrically conductive silicone and stainless steel tubing showed elevated siloxanes only for the silicone tubing. The extent of contamination increased with length of tubing to which the sample was exposed, and decreased with increasing relative humidity.     

Increased environmental gamma-ray dose rate during precipitation: a strong correlation with contributing air mass

It has long been observed that the environmental gamma-ray dose rate increases noticeably during precipitation intervals. This increase, due to the presence of radon progeny in the rain droplets (or snow flakes), can affect the reliability of the monitoring of artificial radioactivity and long term estimates of exposure to ambient natural radionuclides in surveillance network. Predicting the amplitude of the dose increase has been shown to be surprisingly challenging. In this work, standard air mass back trajectory analysis is used to show that the amplitude of the increase can be quantitatively linked to the history of the air mass where the precipitation is occurring. Furthermore, we show how back trajectory analysis, environmental gamma and rain data can be used to obtain estimations of relative radon emanation rates for locations far from the actual point of detection.