Poisoned plusiines: toxicity of milkweed latex and cardenolides to some generalist caterpillars

Summary. Larvae of Trichoplusia ni Hübner (Lepidoptera: Noctuidae) that ingested latex from Asclepias curassavica L. (Asclepiadaceae) often regurgitated and convulsed with spasms before becoming immobile and unresponsive. Some larvae required over a day to recover sufficiently to feed. Latices from four other plant species in three families were all deterrent, but none caused detectable poisoning. The toxicity of A. curassavica latex was evidently due to cardenolides because pure cardenolides had similar effects when ingested by T. ni. Other species of noctuid caterpillars (Rachiplusia ou Guenée, Anagrapha falcifera Kirby, and Autographa precationis Guenée) sometimes also suffered spasms and temporary immobility when fed A. curassavica latex. A more distantly related noctuid, Spodoptera ornithogalli, was deterred by the latex, but showed no overt physiological responses at the dosage tested. T. ni larvae failed to develop on intact leaves of A. curassavica, on leaves with latex canals deactivated by midrib severance, and on excised leaves. Similarly, larvae reared on excised A. syriaca L. leaves to the final instar died when transferred to A. curassavica leaves with either intact or severed midribs. The final instar larvae sometimes suffered from spasms and immobility even when confined on leaves with depressurized canal systems. Evidently, cardenolides stored outside the latex system suffice to poison larvae. We conclude that cardenolides in A. curassavica have potent physiological effects on some generalist caterpillars and that the presence of these compounds both inside and outside laticifers effectively protects the plant. Received 30 June 1999; accepted 18 October 1999     

Coalitionary mate guarding by male chimpanzees at Ngogo, Kibale National Park, Uganda

Cooperative mate guarding by males is unusual in mammals and birds, largely because fertilizations are non-shareable. Chimpanzees live in fission-fusion communities that have cores of philopatric males who cooperate in inter-group aggression and in defending access to the females in their community. Male contest mating competition is restrained within communities, but single high-ranking males sometimes try to mate guard estrous females. Data from an unusually large chimpanzee commmunity at Ngogo, Kibale National Park, Uganda, that contains more males than any previously studied community show new variation in chimpanzee mate-guarding behavior. Contrary to expectation given the large number of males, mate guarding was as common as, or more common than, at other sites, and males other than the alpha male guarded more often. More strikingly, pairs or trios of top-ranking males sometimes engaged in cooperative aggression to prevent estrous females from mating with other males, but tolerated each other's mating activities. Both single males and coalitions mostly guarded periovulatory females. Mate-guarding coalitions were previously unknown in chimpanzees. Coalitions occurred in large mating parties, seemingly because these often contained too many males for single males to maintain exclusive access to estrous females. Coalition members gained higher shares of copulations than they could have expected from solo mate guarding, and suffered lower per capita costs of guarding (as inferred from aggression rates). Two males who most often participated in coalitions formed two-male coalitions at about the point where the number of males present made it unlikely that either could get 50% or more of total copulations on his own, and formed trios when this value dropped below 33%. Kin selection could be a factor in cooperation among male chimpanzees, but coalition members were not necessarily close relatives and the apparent structure of payoffs fit that of mutualism. Furthermore, reliance of male chimpanzees on support from allies to maintain high rank could have led to trading of mating exclusivity for support against mating competitors. Received: 28 May 1997 / Accepted after revision: 16 May 1998     

In field arsenic removal from natural water by zero-valent iron assisted by solar radiation

An in situ arsenic removal method applicable to highly contaminated water is presented. The method is based in the use of steel wool, lemon juice and solar radiation. The method was evaluated using water from the Camarones River, Atacama Desert in northern Chile, in which the arsenic concentration ranges between 1000 and 1300 μg L⁻¹. Response surface method analysis was used to optimize the amount of zero-valent iron (steel wool) and the citrate concentration (lemon juice) to be used. The optimal conditions when using solar radiation to remove arsenic from natural water from the Camarones river are: 1.3 g L⁻¹ of steel wool and one drop (ca. 0.04 mL) of lemon juice. Under these conditions, removal percentages are higher than 99.5% and the final arsenic concentration is below 10 μg L⁻¹. This highly effective arsenic removal method is easy to use and inexpensive to implement.     

Transport of atmospheric fine particulate matter: part 2--findings from recent field programs on the intraurban variability in fine particulate matter

Air quality field data, collected as part of the fine particulate matter Supersites Program and other field measurements programs, have been used to assess the degree of intraurban variability for various physical and chemical properties of ambient fine particulate matter. Spatial patterns vary from nearly homogeneous to quite heterogeneous, depending on the city, parameter of interest, and the approach or method used to define spatial variability. Secondary formation, which is often regional in nature, drives fine particulate matter mass and the relevant chemical components toward high intraurban spatial homogeneity. Those particulate matter components that are dominated by primary emissions within the urban area, such as black carbon and several trace elements, tend to exhibit greater spatial heterogeneity. A variety of study designs and data analysis approaches have been used to characterize intraurban variability. High temporal correlation does not imply spatial homogeneity. For example, there can be high temporal correlation but with spatial heterogeneity manifested as smooth spatial gradients, often emanating from areas of high emissions such as the urban core or industrial zones.     

Development of a regenerable system employing silica-titania composites for the recovery of mercury from end-box exhaust at a chlor-alkali facility

The release of mercury to the environment is of particular concern because of its volatility, persistence, and tendency to bioaccumulate. The recovery of mercury from end-box exhaust at chlor-alkali facilities is important to prevent release into the environment and reduce emissions as required by NESHAP (National Emission Standards for Hazardous Air Pollutants). A pilot-scale photocatalytic reactor packed with silica-titania composite (STC) pellets was tested at a chloralkali facility over a 3-month period. This pilot reactor treated up to 10 ft3/min (ACFM) of end-box exhaust and achieved 95% removal. The pilot reactor was able to maintain excellent removal efficiency even with large fluctuations in influent mercury concentration (400-1600 microg/ft3). The STC pellets were regenerated ex situ by regeneration with hydrochloric acid and performed similarly to virgin STC pellets when returned to service. On the basis of these promising results, two full-scale reactors with in situ regeneration capabilities were installed and operated. After optimization, these reactors performed similarly to the pilot reactor. A cost analysis was performed comparing the treatment costs (i.e., cost per pound of mercury removed) for sulfur-impregnated activated carbon and the STC system. The STC proved to be both technologically and economically feasible for this installation.     

Design approaches for a cycling adsorbent/photocatalyst system for indoor air purification: formaldehyde example

A kinetic model for a cycling adsorbent/photocatalyst combination for formaldehyde removal in indoor air (Chin et al. J. Catalysis 2006, 237, 29-37) was previously developed in our lab, demonstrating agreement with lab-scale batch operation data of other researchers (Shiraishi et al. Chem. Engineer. Sci. 2003, 58, 929-934). Model parameters evaluated included adsorption equilibrium and rate constants for the adsorbent (activated carbon) honeycomb rotor, and catalytic rate constant for pseudo-first-order formaldehyde destruction in the titanium dioxide photoreactor. This paper explores design consequences for this novel system. In particular, the batch parameter values are used to model both adsorbent and photocatalyst behavior for continuous operation in typical residential home challenges. Design variables, including realistic make-up air fraction, adsorbent honeycomb rotation speed, and formaldehyde source emission rate, are considered to evaluate the ability of the system to achieve World Health Organization pollutant guidelines. In all circumstances, the size of the required rotating adsorbent bed and photoreactor for single-stage operation and the resultant formaldehyde concentration in the home are calculated. The ability of how well such a system might be accommodated within the typical dimensions of commercial ventilation ducts is also considered.