Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

Affordability of residential water tariffs: Alternative measurement and explanatory factors in southern Spain

Using information on a basic or “lifeline” level of domestic water use obtained from a water demand function based on a Stone–Geary utility function, a minimum water threshold of 128 m³ per household per year was estimated in a sample of municipalities in Southern Spain. As a second objective, water affordability indexes were then calculated that relate the cost of such lifeline to average municipal income levels. The analysis of the factors behind the differences in that ratio across Andalusian municipalities shows that the relative cost of purchasing the lifeline appears inversely related to average income levels, revealing an element of regressivity in the component of water tariffs affecting the least superfluous part of the household’s consumption. The main policy recommendation would involve redesigning water tariffs in order to improve access for lower income households to an amount of water sufficient to cover their basic needs. The proposed methodology could be applied to other geographical areas, both from developed and from developing countries, in order to analyze the degree of progressivity of the water tariffs currently in effect and in order to guide the design of more equitable regulatory policies.     

Use of isoperibolic calorimetry for the study of the effect of water concentration,temperature and reactor venting on the rate of hydroxylamine thermal decomposition

Hydroxylamine, NH₂OH, thermal decomposition has been responsible for two serious accidents. However, its reactive behavior and the synergy of factors affecting the rate of its decomposition are not understood. In this work, isoperibolic calorimetric measurements were performed in a metal reactor, in the temperature range 130–150 °C, employing 30–80 ml solutions containing 1.4–20 g of pure hydroxylamine (2.8–40 g of the supplied reagent). The calorimetric measurements were performed in order to assess the effects that NH₂OH concentration, temperature and reactor venting has on NH₂OH rate of decomposition. The measurements showed that increased concentration or temperature, results in faster reactions and probably higher pressure generation per mass of reactant, with concentration having a more pronounced effect. However, when both factors work synergistically the result is dramatically worse in terms of reaction rate. The pressure generation is also different, thus indicating that different reaction pathways predominate each time. Venting the produced gases in stages resulted in the highest mass loss of the solution.     

Vertical and horizontal distributions of microbial abundances and enzymatic activities in propylene-glycol-affected soils

The natural microbial activity in the unsaturated soil is vital for protecting groundwater in areas where high loads of biodegradable contaminants are supplied to the surface, which usually is the case for airports using aircraft de-icing fluids (ADF) in the cold season. Horizontal and vertical distributions of microbial abundance were assessed along the western runway of Oslo Airport (Gardermoen, Norway) to monitor the effect of ADF dispersion with special reference to the component with the highest chemical oxygen demand (COD), propylene glycol (PG). Microbial abundance was evaluated by several biondicators: colony-forming units (CFU) of some physiological groups (aerobic and anaerobic heterotrophs and microscopic fungi), most probable numbers (MPN) of PG degraders, selected catabolic enzymatic activities (fluorescein diacetate (FDA) hydrolase, dehydrogenase, and β-glucosidase). High correlations were found between the enzymatic activities and microbial counts in vertical soil profiles. All microbial abundance indicators showed a steep drop in the first meter of soil depth. The vertical distribution of microbial abundance can be correlated by a decreasing exponential function of depth. The horizontal trend of microbial abundance (evaluated as total aerobic CFU, MPN of PG-degraders, and FDA hydrolase activity) assessed in the surface soil at an increasing distance from the runway is correlated negatively with the PG and COD loads, suggesting the relevance of other chemicals in the modulation of microbial growth. The possible role of potassium formate, component of runway de-icers, has been tested in the laboratory by using mixed cultures of Pseudomonas spp., obtained by enrichment with a selective PG medium from soil samples taken at the most contaminated area near the runway. The inhibitory effect of formate on the growth of PG degraders is proven by the reduction of biomass yield on PG in the presence of formate.     

Pd-nanoparticles cause increased toxicity to kiwifruit pollen compared to soluble Pd(II)

In the present study, endpoints including in vitro pollen performance (i.e., germination and tube growth) and lethality were used as assessments of nanotoxicity. Pollen was treated with 5-10 nm-sized Pd particles, similar to those released into the environment by catalytic car exhaust converters. Results showed Pd-nanoparticles altered kiwifruit pollen morphology and entered the grains more rapidly and to a greater extent than soluble Pd(II). At particulate Pd concentrations well below those of soluble Pd(II), pollen grains experienced rapid losses in endogenous calcium and pollen plasma membrane damage was induced. This resulted in severe inhibition and subsequent cessation of pollen tube emergence and elongation at particulate Pd concentrations as low as 0.4 mg L⁻¹. Particulate Pd emissions related to automobile traffic have been increasing and are accumulating in the environment. This could seriously jeopardize in vivo pollen function, with impacts at an ecosystem level.     

Characterization and Properties of Hydrophilic Cellulose Acetate Propionate Derivative

The chemical modification of Acrylamidomethyl Cellulose Acetate Propionate (AMCAP) was carried out by radical addition of acrylic acid. The structural modification was confirmed with the aid of FTIR, MS and NMR techniques. Thermal properties of hydrophilic cellulose derivative (AMCAP–H₂O₂) such as glass transition (T_g 153 °C) and thermal stability (372.7 °C) were determined by DSC and TGA techniques, respectively. These thermal properties confirmed the introduction of carboxylic groups into AMCAP structure, which causes an impact in their properties. The AMCAP–H₂O₂ shows minor contact angle compared to AMCAP, giving a more hydrophilic characteristic, due to acrylic acid addition into the side chains of AMCAP polymer.     

Regional extinction of a conspicuous dorid nudibranch (Mollusca: Gastropoda) in California

Felimare californiensis (=Hypselodoris californiensis) was once common throughout the Southern California Bight (SCB) and California Channel Islands. This well-known shallow-water nudibranch, which specializes on dysideid sponges, has persisted for decades in Mexico, but in California disappeared from its entire range by 1984. Since reappearing in 2003, it has been found only at Santa Catalina Island, plus sightings of single individuals in 2011 at Santa Cruz Island and San Diego. The decline of F. californiensis in California was documented using published historical records, museum collections, unpublished field accounts, and images posted online. The loss of this emblematic species is unique among Californian nudibranchs, including (1) its congener Felimare porterae (=Mexichromis porterae), with which it appears to overlap in diet, and (2) opisthobranch species with similar historical geographic ranges and mode of development. The decline in F. californiensis is not predicted by warming trends and climate variation over the past 40 years, including the strong El Niño events of 1983 and 1998. Coastal pollution from the large human population in southern California may have impacted Dysidea amblia, the primary reported prey of F. californiensis. Historical overcollecting of the nudibranch and habitat loss through the development of major ports likely also contributed to its decline. Sightings since 2003 are consistent with a nascent recovery, as elements of water quality have improved in the SCB in recent decades.     

Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200 atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η = 6.4, whereas the thermal basic pretreatment gave the highest value, η = 17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η = 9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η = 5.2.     

Using Twitter to communicate conservation science from a professional conference

Scientists are increasingly using Twitter as a tool for communicating science. Twitter can promote scholarly discussion, disseminate research rapidly, and extend and diversify the scope of audiences reached. However, scientists also caution that if Twitter does not accurately convey science due to the inherent brevity of this media, misinformation could cascade quickly through social media. Data on whether Twitter effectively communicates conservation science and the types of user groups receiving these tweets are lacking. To address these knowledge gaps, we examined live tweeting as a means of communicating conservation science at the 2013 International Congress for Conservation Biology (ICCB). We quantified and compared the user groups sending and reading live tweets. We also surveyed presenters to determine their intended audiences, which we compared with the actual audiences reached through live tweeting. We also asked presenters how effectively tweets conveyed their research findings. Twitter reached 14 more professional audience categories relative to those attending and live tweeting at ICCB. However, the groups often reached through live tweeting were not the presenters’ intended audiences. Policy makers and government and non‐governmental organizations were rarely reached (0%, 4%, and 6% of audience, respectively), despite the intent of the presenters. Plenary talks were tweeted about 6.9 times more than all other oral or poster presentations combined. Over half the presenters believed the tweets about their talks were effective. Ineffective tweets were perceived as vague or missing the presenters’ main message. We recommend that presenters who want their science to be communicated accurately and broadly through Twitter should provide Twitter‐friendly summaries that incorporate relevant hashtags and usernames. Our results suggest that Twitter can be used to effectively communicate speakers’ findings to diverse audiences beyond conference walls.