Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

     

Influence of gas flow-induced shear stress on the operation of the Anammox process in a SBR

The start up and performance of the Anammox process were tested in sequencing batch reactors with two different configurations: a bubble column (SBR-B) and a gas-lift reactor (SBR-G). Different off-gas upflow velocities were tested (3.53-12.3 cm min(-1)) in order to expose the biomass to different shear conditions and to study their effects on both efficiency and physical properties of the Anammox granular biomass. For the SBR-B the minimum gas upflow velocity needed to achieve biomass suspension inside the reactor was 12.3 cm min(-1). Such velocity made impossible the stable operation of the process. The fluidization of biomass for the SBR-G was reached at a gas upflow velocity of 3.52 cm min(-1). This system maintained an efficiency of nitrite removal around 98% at values up to 5.29 cm min(-1) but when the gas upflow velocity was increased from 5.29 to 9.70 cm min(-1) a significant decrease of the specific Anammox activity of the biomass from 0.35 to 0.05 g Ng(-1) VSS d(-1) was measured. The system lost 85% of its nitrogen removal efficiency which was not restored in spite of returning the gas upflow velocity to its initial value.     

Diffusion of PAH and PCB from contaminated sediments with and without mineral capping; measurement and modelling

A novel laboratory microcosm test was developed to measure the diffusion of native PAHs and PCBs from sediments in the presence and absence of a capping layer. Diffusive flux of 15 PAHs and 7 PCBs from uncapped sediment from Oslo harbour was 3.8+/-0.9 microg m(-2)d(-1) and 0.010+/-0.003 microg m(-2)d(-1), respectively. The flux from sediments capped with 1cm mineral cap (crushed limestone or crushed gneiss (0-2mm)), observed during the first 410 d, was 3.5-7.3% of the flux from uncapped sediments. By measuring freely dissolved pore water concentrations of 10 PAHs the flux in the microcosm was modelled with steady state and transient diffusion models. The measured flux from uncapped sediment was 27-290% of modelled steady state flux. Good agreement was also found between the measured flux of pyrene from capped sediment and the flux modelled with the transient model when fitting only with the distribution coefficients for pyrene between the cap material and water (Kd_pyr). Fitted Kd_pyr, (210 and 23 l kg(-1) for limestone and gneiss, respectively) was in the same order of magnitude as K(d) calculated from organic carbon content in the cap materials (68 and 14 l kg(-1) respectively). Calculation of the efficiency of a hypothetical cap with 10 cm diffusion path shows that the increased diffusion path length alone can yield a flux reduction >99% through a strong increase in the stagnant diffusive boundary layer from <1 to 100mm.     

Antioxidant enzyme activities as affected by trivalent and hexavalent chromium species in Fontinalis antipyretica Hedw

The detoxification mechanisms of the aquatic moss, Fontinalis antipyretica Hedw., exposed to Cr was analyzed. In addition, the influence of Cr salts (as Cr nitrate, chloride and potassium bichromate) on these mechanisms has also been studied. The activity of antioxidant enzymes superoxide dismutase (SOD, EC 1.15.1.1.), catalase (EC 1.11.1.6.), ascorbate peroxidase (APX, EC 1.11.1.11.), guaiacol peroxidase (GPX, EC 1.11.1.7.) and glutathione reductase (GR, EC 1.6.4.2.) increased in plants treated with Cr concentrations ranging from 6.25x10(-5) to 6.25mM when given as Cr(NO(3))(3). Antioxidant enzymes responded to the other two salts CrCl(3) and K(2)Cr(2)O(7) only with Cr concentrations higher than 6.25x10(-2)mM. Glutathione level and GSSG/GSH ratio also responded to Cr exposure but no dose-effect relationship could be observed. Moreover, two unknown thiol compounds were observed in mosses exposed to the highest Cr concentrations. Effects on chlorophyll contents and chlorophyll a/b ratios were also shown even at low Cr concentrations. Our results indicated that environmentally realistic concentrations of Cr could lead to impairment of the cellular activity towards F. antipyretica and that Cr(III), when present as a nitrate salt, was as harmful as Cr(VI).     

Discriminating the pH toxicity to Poecilia reticulata Peters, 1859 in the Dunas Lake (Camaçari, BA, Brazil)

Toxic potential of the pH reduction to fingerlings of Poecilia reticulata, through acute toxicity bioassays, as well as the influence of increased pH on the toxicity were assessed. Acid lake samples (Dunas Lake) were collected during 19 months, and assessed with following treatments: water at local pH (+/-3.0) and samples with modified pH to 3.5, 3.8, 4.0, 4.3, 4.6, 5.0, 5.5, 6.0, and 6.5. Culture water samples with pH reduced to 3.0 were also assessed. Newborn P. reticulata were exposed during 96h, and dead/immobile organisms were counted at various time intervals during exposure (short intervals in the beginning and long towards the end). Mean results of LT(50) and confidence intervals from the Dunas Lake and control water with reduced pH were 1.36 (+/-0.48)h, and 1.03 (+/-0.50)h, respectively, with no statistical difference. Samples with increased pH showed a significant reduction in toxicity, with no toxicity detected at pH 6.0 and higher. Relationship between pH and lethal toxicity for fingerlings of P. reticulata demonstrated that pH exerted a strong effect on the survival of this species at the Dunas Lake, explaining about 80% of the toxicity observed.     

Sorption of copper, zinc and lead on soil mineral phases

Soil mineral phases play a significant role in controlling heavy metal mobility in soils. The effective study of their relation needs the integrated use of several analytical methods. In this study, analytical electron microscopy analyses were combined with sequential chemical extractions on soils spiked with Cu, Zn and Pb. Our aims were to study the metal sorption capacity of soil mineral phases and the effect of presence of iron oxide and carbonate on this property of soil minerals. Copper and Pb were found to be characterized by higher and stronger sorption on the studied samples than Zn. Only the former two metals showed significant differences in their immobilized metal amounts on the studied samples and soil mineral particles. Highest metal amounts were sorbed on the swelling clay mineral particles (smectites and vermiculites), but iron-oxide phases may also have similar lead sorption capacity. Alkaline conditions due to the carbonate content of soils resulted both in increased sorption on the mineral particles for Cu and in enhanced role of precipitation for all the studied metals. On the other hand, the intimate association of phyllosilicates and iron resulted in significant increase in metal sorption capacity of the given particle. The results of sequential extractions could be successfully completed by the analytical electron microscopy analyses for studying the sorption capacity of discrete mineral particles. Their integrated use helps us in better understanding the heavy metal-mineral interactions in soils.     

Polymer biodegradation: mechanisms and estimation techniques

Within the frame of the sustainable development, new materials are being conceived in order to increase their biodegradability properties. Biodegradation is considered to take place throughout three stages: biodeterioration, biofragmentation and assimilation, without neglect the participation of abiotic factors. However, most of the techniques used by researchers in this area are inadequate to provide evidence of the final stage: assimilation. In this review, we describe the different stages of biodegradation and we state several techniques used by some authors working in this domain. Validate assimilation (including mineralisation) is an important aspect to guarantee the real biodegradability of items of consumption (in particular friendly environmental new materials). The aim of this review is to emphasise the importance of measure as well as possible, the last stage of the biodegradation, in order to certify the integration of new materials into the biogeochemical cycles. Finally, we give a perspective to use the natural labelling of stable isotopes in the environment, by means of a new methodology based on the isotopic fractionation to validate assimilation by microorganisms.     

Polycyclic aromatic hydrocarbon sampling in wastewaters using semipermeable membrane devices: accuracy of time-weighted average concentration estimations of truly dissolved compounds

Semipermeable membrane devices (SPMDs) previously spiked with performance reference compounds were exposed in wastewater. After 6 days of exposure, 13 polycyclic aromatic hydrocarbons (PAHs) were quantified in SPMDs. Exchange rate constants and time-weighted average (TWA) concentrations of SPMD-available PAHs in water were calculated. The bias of using SPMDs to estimate an actual TWA concentration if the concentration in water fluctuates, as can be expected in wastewater, was studied with numerical simulations. The bias increased with the exchange rate constant. However, most exchange rate constants evaluated in SPMDs exposed in wastewater were small enough for SPMDs to estimate a TWA concentration of PAHs even when the water concentration varied. TWA-SPMD-available concentrations were always below total dissolved (operationally defined as 0.7 microm) concentrations, indicating that part of the dissolved PAHs was not available for sampling. In situ partitioning coefficients K(DOC) were computed and found to be slightly higher than data from the literature. This confirms that only truly dissolved PAHs should be sampled by SPMDs in wastewater.