Use of scenarios and strategic planning to explore an uncertain future in Greenland

Greenland is facing unpredictable changes due to ongoing exploration in the extractive sector. More exploration applications than ever are being submitted to the Greenlandic authorities and development trends are therefore hard to determine. Based on the challenge of securing strategic planning in the Greenlandic context, this article examines scenario building as a planning tool. An empirical study that uses local stakeholder input identifies nine primary driving forces to frame and setup four scenarios for potential Greenland futures. The study also demonstrates that there are significant barriers for strategic planning. These are related to creating an inclusive process, reaching agreement on values and content of the scenarios and securing coordination, ownership and commitment among the stakeholders.     

Concentrations and Diversity of Microbes from Four Local Bioaerosol Emission Sources in Finland

ABSTRACT

Microbial particles can readily be released into the air from different types of man-made sources such as waste operations. Microbiological emissions from different biological sources and their dispersion may be an issue of concern for area planning and for nearby residents. This study was designed to determine the concentrations and diversity of microbiological emissions from four different man-made source environments: waste center with composting windrows, sewage treatment plant, farming environment, and cattle manure spreading. Samples of airborne particles were collected onto polyvinyl chloride filters at three distances along the prevailing downwind direction, from each source environment during a period of approximately 1 week. These samples were analyzed for 13 species or assay groups of fungi, bacterial genus Streptomyces, and Gram-positive and -negative bacteria using quantitative polymerase chain reaction (PCR). Samples for determining the concentrations of viable fungi and bacteria were collected from all environments using a six-stage impactor. The results show that there were variations in the microbial diversity between the source environments. Specifically, composting was a major source for the fungal genera Aspergillus and Penicillium, particularly for Aspergillus fumigatus, and for the bacterial genus Streptomyces. Although the microbial concentrations in the sewage treatment plant area were significantly higher than those at 50 or 200 m distance from the plant area, in the farming environment or cattle manure spreading area, no significant difference was observed between different distances from the source. In summary, elevated concentrations of microbes that differ from background can only be detected within a few hundred meters from the source. This finding, reported earlier for culturable bacteria and fungi, could thus be confirmed using molecular methods that cover both culturable and nonculturable microbial material.

IMPLICATIONS Concentrations and diversity of airborne microbes increase due to particle emissions from different biological waste treatment applications. However, these emissions cannot be separated from the background concentrations after more than a few hundred meters from the source. As part of a risk assessment, it may be necessary to confirm the behavior of microbial emissions from a specific source. Quantitative PCR is a useful tool for estimating total concentrations of different microbial species or groups as it detects both culturable and nonculturable microbial material.     

A study of metal and metalloid contaminant availability in Antarctic marine sediments

Previous studies of impacted sites near Casey Station, Antarctica, have revealed elevated concentrations of metals and metalloids, particularly Cd, Cu, Fe, Pb, Sn and Zn in marine sediments. However, attempts to understand the availability and mobility of contaminant elements have not provided a true understanding of speciation. The current work shows, for the first time, that sediments in Brown Bay, an embayment adjacent to the Thala Valley waste disposal site, have elevated concentrations of sulfide, well in excess of that required to bind contaminant metals such as Cd, Cu, Pb and Zn. Furthermore, sediment characterisation using the BCR sequential extraction scheme has shown metal partitioning consistent with sulfides being the controlling factor in metal availability, thus explaining the low porewater concentrations of these metals. The speciation of Sn in Brown Bay, however, is still unclear with the BCR sequential extraction scheme partitioning Sn predominantly into the residual fraction despite Sn being readily extracted by dilute HCl.     

Organochlorines in harbor seal (Phoca vitulina) tissues from the northern Gulf of Alaska

Polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane (DDT) and its metabolites, heptachlor and hexachlorocyclohexanes (HCHs) were analyzed in the harbor seal (Phoca vitulina) tissues collected from the Gulf of Alaska during 2000-2001. summation SigmaPCBs (16-728 ng/gl w) and summation SigmaDDTs (14-368 ng/gl w) were the predominant pollutants followed by summation operatorHCHs (0.56-93 ng/gl w) and heptachlor (相似文献   

Tree species effect on the redistribution of soil metals

Phytostabilization of metals using trees is often promoted although the influence of different tree species on the mobilization of metals is not yet clear. Soil and biomass were sampled 33 years after planting four tree species (Quercus robur, Fraxinus excelsior, Acer pseudoplatanus, Populus 'Robusta') in a plot experiment on dredged sediment. Poplar took up high amounts of Cd and Zn and this was associated with increased Cd and Zn concentrations in the upper soil layer. The other species contained normal concentrations of Cd, Cu, Cr, Pb and Zn in their tissues. Oak acidified the soil more than the other species and caused a decrease in the concentration of metals in the upper soil layer. The pH under poplar was lower than expected and associated with high carbon concentrations in the top soil. This might be assigned to retardation of the litter decomposition due to elevated Cd and Zn concentrations in the litter.     

A simple procedure for correcting loading effects of aethalometer data

A simple method for correcting for the loading effects of aethalometer data is presented. The formula BC(CORRECTED) = (1 + k x ATN) x BC(NONCORRECTED), where ATN is the attenuation and BC is black carbon, was used for correcting aethalometer data obtained from measurements at three different sites: a subway station in Helsinki, an urban background measurement station in Helsinki, and a rural station in Hyyti?l? in central Finland. The BC data were compared with simultaneously measured aerosol volume concentrations (V). After the correction algorithm, the BC-to-V ratio remained relatively stable between consequent filter spots, which can be regarded as indirect evidence that the correction algorithm works. The k value calculated from the outdoor sites had a clear seasonal cycle that could be explained by darker aerosol in winter than in summer. When the contribution of BC to the total aerosol volume was high, the k factor was high and vice versa. In winter, the k values at all wavelengths were very close to that obtained from the subway station data. In summer, the k value was wavelength dependent and often negative. When the k value is negative, the noncorrected BC concentrations overestimated the true concentrations.     

Atmospheric Deposition and Ozone Levels in Swiss Forests: Are Critical Values Exceeded?

Air pollution affects forest health through atmospheric deposition of acidic and nitrogen compounds and elevated levels of tropospheric ozone (O₃). In 1985, a monitoring network was established across Europe and various research efforts have since been undertaken to define critical values. We measured atmospheric deposition of acidity and nitrogen as well as ambient levels of O₃ on 12, 13, and 14 plots, respectively, in the framework of the Swiss Long-Term Forest Ecosystem Research (LWF) in the period from 1995 to 2002. We estimated the critical loads of acidity and of nitrogen, using the steady state mass balance approach, and calculated the critical O₃ levels using the AOT40 approach. The deposition of acidity exceeded the critical loads on 2 plots and almost reached them on 4 plots. The median of the measured molar ratio of base nutrient cations to total dissolved aluminium (Bc/Al) in the soil solution was higher than the critical value of 1 for all depths, and also at the plots with an exceedance of the critical load of acidity. For nitrogen, critical loads were exceeded on 8 plots and deposition likely represents a long-term ecological risk on 3 to 10 plots. For O₃, exceedance of critical levels was recorded on 12 plots, and led to the development of typical O₃-induced visible injury on trees and shrubs, but not for all plots due to (1) the site specific composition of O₃ sensitive and tolerant plant species, and (2) the influence of microclimatic site conditions on the stomatal behaviour, i.e., O₃ uptake.     

The modulation of worker behavior by the vibration signal during house hunting in swarms of the honeybee, Apis mellifera

During house hunting, honeybee, Apis melli- fera, workers perform the vibration signal, which may function in a modulatory manner to influence several aspects of nestsite selection and colony movement. We examined the role of the vibration signal in the house-hunting process of seven honeybee swarms. The signal was performed by a small proportion of the older bees, and 20% of the vibrating bees also performed waggle dances for nestsites. Compared to non-vibrating controls, vibrating bees exhibited increased rates of locomotion, were more likely to move into the interiors of the swarms, and were more likely to fly from the clusters and perform waggle dances. Recipients responded to the signal with increased locomotion and were more likely than non- vibrated controls to fly from the swarms. Because vibration signals were intermixed with waggle dances by some vibrators, and because they stimulated flight in recipients, the signals may have enhanced nestsite scouting and recruitment early in the house-hunting process. All swarms exhibited increased vibration activity within 0.5–1 h of departure. During these final periods, numerous vibrating bees wove repeatedly in and out of the clusters while signaling and motion on the swarms increased until it culminated in mass flight. The peaks of vibration activity observed at the end of the house-hunting process may therefore have activated the entire swarm for liftoff once a new nestsite had been selected. Thus, the vibration signal may help to integrate the behavior of numerous groups of workers during nestsite selection and colony relocation. Received: 17 January 2000 / Received in revised form: 5 April 2000 / Accepted: 3 May 2000     

Issues in monitoring hazardous chemicals in stormwater runoff/discharges from superfund and other hazardous chemical sites

Deficiencies in design and execution render stormwater‐runoff monitoring programs for many hazardous chemical sites inadequate for assessing the potential environmental quality and public health impacts of chemicals in the runoff. Two pervasive problems are the use of analytical methods that are inadequate for measuring certain hazardous chemicals at potentially hazardous concentrations, and the application of “criteria/standards” that are inappropriate for evaluating the environmental/public health impacts of chemicals. These concerns are most notable for carcinogens and chemicals that bioaccumulate in edible aquatic organisms, including arsenic, chromium, beryllium, mercury, dioxins, organochlorine pesticides (such as DDT), and polychlorinated biphenyls; unrecognized pollutants; and nanomaterials. In order to appropriately evaluate whether the runoff/discharge from a hazardous chemical site is a threat to human health, the analytical methods must be sufficiently sensitive in critical concentration ranges; sampling regimens need to be sufficiently rigorous to provide reliable characterization of the content of the runoff, receiving water, and, for bioaccumulatable chemicals, levels in edible organisms in receiving water. Proper sampling and analysis will then provide data to enable the appropriate criteria/standards to be applied. © 2010 Wiley Periodicals, Inc.