A rapid method for screening of the Stockholm Convention POPs in small amounts of human plasma using SPE and HRGC/HRMS

A rapid analytical screening method allowing simultaneous analysis of 23 persistent organic pollutants (POPs) in human plasma was developed. Sample preparation based on solid-phase extraction (SPE) with additional clean-up using small multilayer silica gel columns. SPE was performed using a custom made polystyrene-divinylbenzene sorbent for the extraction of chlorinated and brominated POPs. Special efforts to reduce sample volume and improve speed and efficiency of the analytical procedure were made. Determination of 16 polychlorinated biphenyls (PCBs), 5 organochlorine (OC) pesticides, octachlorinated dibenzo-p-dioxin (OCDD) and polybrominated diphenyl ether (BDE #47) in 0.5 mL human plasma was performed by using high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC/HRMS). Recovery of POPs ranged between 46% and 110%, and reproducibility was below 25% relative standard deviation (RSD) for all target compounds, except for trans-nonachlor and OCDD, which were present only at low levels. Limits of detection (LOD) were for the PCBs between 0.8 and 117.7 pg mL⁻¹ plasma and for the OC pesticides between 5.9 and 89.1 pg mL⁻¹ plasma. The LOD for OCDD and BDE #47 were 1.4 pg mL⁻¹ plasma, and 9.2 pg mL⁻¹ plasma, respectively. The presented method was successfully applied to 1016 human plasma samples from an epidemiological study on cardiovascular disease.     

Survey of arsenic and its speciation in rice products such as breakfast cereals, rice crackers and Japanese rice condiments

Rice has been demonstrated to be one of the major contributors to arsenic (As) in human diets in addition to drinking water, but little is known about rice products as an additional source of As exposure. Rice products were analyzed for total As and a subset of samples were measured for arsenic speciation using high performance liquid chromatography interfaced with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). A wide range of rice products had total and inorganic arsenic levels that typified those found in rice grain including, crisped rice, puffed rice, rice crackers, rice noodles and a range of Japanese rice condiments as well as rice products targeted at the macrobiotic, vegan, lactose intolerant and gluten intolerance food market. Most As in rice products are inorganic As (75.2-90.1%). This study provides a wider appreciation of how inorganic arsenic derived from rice products enters the human diet.     

Coupling occurs before breakdown during biotransformation of Acid Blue 62 by white rot fungi

Only few data exist on the metabolites produced during the biotransformation of anthraquinonic dyes by white rot fungi (WRF). During the biotransformation of an anthraquinonic dye Acid Blue 62 (ABu62) using Pycnoporus sanguineus MUCL 41582 strain, it was previously demonstrated that the blue colour of the medium turned to red before complete dye decolourisation. To better understand the phenomenon, this study carried out ABu62 biotransformation with five different WRF strains (Coriolopsis polyzona MUCL 38443, Perenniporia ochroleuca MUCL 41114, Perenniporia tephropora MUCL 41562, P. sanguineus MUCL 38531 and Trametes versicolor MUCL 38412) and compared with P. sanguineus MUCL 41582 previously described. A multi-methodological approach (using capillary electrophoresis, mass spectrometry, HPLC, UV, NMR and IR spectroscopies) was developed to characterise the metabolites involved and monitor their apparition. Seven metabolites were commonly found with all strains, suggesting a common metabolic pathway for ABu62 biotransformation. During the first days, dimer and oligomers of the initial ABu62 molecule were observed: the main one absorbed in the 500nm region, explaining the red colour appearance of the medium. This main metabolite was made up of two molecules of ABu62 linked by an azo bond, minus a cyclohexyl moiety. After a longer incubation time, breakdown products were observed. Based on these products characterizations, a bioconversion pathway was proposed.     

Pushing and pulling: an assessment tool for occupational health and safety practitioners

A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator’s health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.     

Oil Contamination in Ogoniland, Niger Delta

The study shows extensive oil contamination of rivers, creeks, and ground waters in Ogoniland, Nigeria. The levels found in the more contaminated sites are high enough to cause severe impacts on the ecosystem and human health: extractable petroleum hydrocarbons (EPHs) (>10-C40) in surface waters up to 7420 μg L⁻¹, drinking water wells show up to 42 200 μg L⁻¹, and benzene up to 9000 μg L⁻¹, more than 900 times the WHO guidelines. EPH concentrations in sediments were up to 17 900 mg kg⁻¹. Polycyclic aromatic hydrocarbons concentrations reached 8.0 mg kg⁻¹, in the most contaminated sites. The contamination has killed large areas of mangroves. Although the natural conditions for degradation of petroleum hydrocarbons are favorable with high temperatures and relatively high rainfall, the recovery of contaminated areas is prevented due to the chronic character of the contamination. Oil spills of varying magnitude originates from facilities and pipelines; leaks from aging, dilapidated, and abandoned infrastructure; and from spills during transport and artisanal refining of stolen oil under very primitive conditions.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0412-8) contains supplementary material, which is available to authorized users.     

Evaluation of the Chemcatcher and DGT passive samplers for monitoring metals with highly fluctuating water concentrations

Passive sampling devices accumulate chemicals continuously from water and can provide time weighted average (TWA) concentrations of pollutants over the exposure period. Hence, they offer a number of advantages over other conventional monitoring techniques such as spot or grab sampling. The diffusive gradient in thin film (DGT) and the Chemcatcher passive samplers can be used to provide TWA concentrations of labile metals, but the approaches to their calibration differ. DGT uses diffusion coefficients of metals in the hydrogel layer, whereas Chemcatcher uses metal specific uptake rates, with both sets of values obtained under controlled laboratory conditions with constant aqueous metal concentrations. However, little is known of how such samplers respond to fluctuating concentrations. We evaluated the responsiveness of these two passive sampling devices to rapidly changing concentrations of Cd, Cu, Ni, Pb and Zn in natural freshwater, over a relatively short deployment time. Maximum metal concentrations in water were varied between 70 and 140 microg L(-1). Experiments were carried out in a tank with a rotating carousel system and filled with Meuse river water, allowing a degree of control over experimental conditions while using natural river water. Fluctuating concentrations were obtained by stepwise addition of standard solutions of the metals. The reliability and accuracy of the TWA concentrations measured by the samplers were assessed by comparison with concentrations of the metals in spot samples of water taken regularly over the deployment period. The spot samples of water were either unfiltered (total), filtered (0.45 microm) or ultrafiltered (5 kDa). Predictive speciation modelling using the visual MINTEQ programme was also undertaken. There was reasonable agreement between the TWA concentrations of Cd and Ni obtained with Chemcatcher and DGT and the total Cd and Ni concentrations measured in repeated unfiltered spot samples. For elements (i.e. Cu, Pb, Zn) that associate to a significant degree with suspended solids, colloids or dissolved organic carbon, or form complexes with large organic ligands, optimum agreement was with the filtered or ultrafiltered fractions and with the predicted inorganic and inorganic-fulvic acid associated fractions. While Chemcatcher-based TWA concentration ranges for Cu and Zn were in best agreement with the total filtered fraction, there was lack of agreement for Pb. The combined use of DGT devices with open pore (OP) and restricted pore (RP) gels allowed the labile fraction of metal associated with large organic ligands or DOC to be differentiated and quantified, since this is available to DGT OP but unable to diffuse into the DGT RP. This evaluation of the two sampling devices clearly demonstrated their ability to react reliably to transient peaks in concentration of metal pollutants in water and indicated where future efforts are needed to improve calibration data. Such samplers may prove valuable in responding to the monitoring requirements of the European Union's Water Framework Directive.     

Subject Index

Subject Index

Subject Index     

Genetic amniocentesis at 7–14 weeks of gestation

Genetic amniocentesis performed at 7–14 weeks of gestation was studied in a series of 138 patients of whom 50 wanted termination of pregnancy (⩽ 12 weeks). The material for analysis consisted of 132 samples due to two sampling failures and four samples being handled incorrectly. Forty-eight samples (36 per cent) were taken at 7–12 weeks of gestation, mainly transvaginally (36/48:75 per cent). The success rate of culture and karyotyping increased with the duration of pregnancy, but was only satisfactory from week 11 onwards. The time until harvest was then 14–15 days. The transvaginal approach is easy to perform and was accepted by the women, but we experienced bacterial or fungal overgrowth in 17 per cent of these samples, whereas no infection occurred in the samples taken transabdominally (n = 96). We conclude that genetic amniocentesis is feasible from week 11, but further studies concerning side effects, especially focusing on the procedure-related abortion risk, should be carried out before early amniocentesis is routinely applied.     

A culture vessel for amniotic fluid cells allowing faster preparation of chromosome slides

A new culture vessel for amniotic fluid culture is presented (flaskette). It consists of a microscope slide, on top of which a culture chamber is mounted. Amniotic fluid cell cultures using in situ technique in the flaskette were compared to subcultured samples in ordinary (Falcon) tissue culture bottles. Working time was reduced by using this new culture vessel because of a very simple harvest procedure allowing simultaneous harvest of 15 samples. The interval between amniocentesis and harvest was shorter for the in situ technique than for the subcultivation technique. The frequency of aneuploidy in individual metaphases was higher with the subcultivation technique. while there was no difference in the frequency of structural anomalies.     

雄性波罗的海灰海豹(Halichoerus grypus)骨组织的矿物密度

本文利用非侵入计算层析X射线摄影法(pQCT)研究了雄性波罗的海灰海豹(4～23岁龄)骨组织的矿物密度(mg/cm3).资料按照收集的年份分组.A组1850～1955年,有机氯(OCs)大量引入之前的时期;B组1965～1985年,OC污染十分严重的时期;C组1986～1997年,OCs浓度逐渐减小的时期.测量结果的复现性良好,变异系数(CV)为0.1%～2.1%.1986～1997年收集的标本中桡骨小梁的矿物密度比1965～1985年收集的标本的明显要高(p＜0.05).1986～1997年收集的标本中,下颌骨的皮层骨矿物密度明显地低于1850～1955年收集的标本(p＜0.05).这些结果表明小梁和皮层骨在一段时间内的不同响应.在OC污染非常严重的时期(1965～1985年),小梁骨矿物密度最低,而在1985～1997年收集的标本中,皮层骨密度最低,该时段是一个OC污染程度相当低的时期.有关这些效应背后的机制目前尚不知道.但是,可以假定这里涉及到OCs.由于目前缺乏有关研究个体中OCs残留水平的资料,因此不可能评估OCs在这方面的影响.