A kinetic analysis of solid waste composting at optimal conditions

This discussion explores the possibility of having a measure of the biodegradable organic carbon content in solid wastes. Currently, indirect measures for determining the concentration of biodegradable organic matter are being used and most of them are based on respiration indices (oxygen consumption or carbon dioxide production) or chemical parameters (volatile solids or total organic carbon). The results obtained for the cumulative carbon dioxide production in composting experiments can be expressed as "aerobic biodegradable carbon" for the wastes that were studied. The calculation of a useful biodegradable C/N can also be obtained from the aerobic biodegradable carbon content. A comparison with some results obtained in measuring the concentration of "anaerobic biodegradable carbon" also is presented.     

Wastewater reuse in Mediterranean semi-arid areas: The impact of discharges of tertiary treated sewage on the load of polar micro pollutants in the Llobregat river (NE Spain)

The presence of sewage-borne micro contaminants in environmental waters is directly related to the discharge of treated effluents from wastewater treatment plants (WWTP) and the flow rate of the receiving river waters. Mediterranean rivers, in particular, are characterized by important fluctuations in the flow rates and heavy pollution pressures resulting from extensive urban, industrial and agricultural activities. This translates into contamination levels in these rivers often higher than those in other larger European basins. The present work provides an overview of the occurrence of five groups of organic contaminants (131 compounds) namely pharmaceuticals, illicit drugs, polar pesticides, estrogens, alkylphenols and related ethoxylates in WWTP tertiary treatment effluents. Data gathered during a period of water reuse carried out in the lower stretch of the Llobregat river (NE Spain), in the surroundings of the town of Barcelona as a consequence of the severe drought that took place along the years 2007-2008 are presented as illustrative example. In general, measured concentrations of the target compounds were in the low to mid ng L⁻¹ range. The total concentration of each compound class downstream to the discharge point was similar or slightly higher than that found upstream. Regarding the loads calculated for each compound, the relative contribution from the river upstream and the tertiary effluent were highly compound depending with no apparent trend. However, estimation of the overall bulk loads for each compound class determined in the Llobregat river showed the following rank order: pharmaceuticals > alkylphenols > pesticides > illicit drugs ? estrogens.     

Fast preparation of the seawater accommodated fraction of heavy fuel oil by sonication

The seawater accommodated fraction (SWAF) of oil is widely used for the assessment of its toxicity. However, its preparation in the laboratory is time consuming, and results from different authors are difficult to compare as preparation methods vary. Here we describe a simple and fast set up, using sonication, to produce reproducible SWAF in the laboratory. The system was tested on heavy fuel oil placed on seawater at different salinity and temperature conditions. Maximum dissolution of the oil was achieved after 24 h, independently of both seawater salinity and temperature. Our findings are discussed in relation to the fate of the oil from the deep spill of the Prestige tanker. Changes in temperature in the open ocean are bound to have larger impact in the concentration of the SWAF than the corresponding values of sea water salinity. We anticipate that in this type of incident the highest SWAF, as the oil reaches the sea surface, should be expected in the warmest and less saline waters of the water column.     

A system coupling hybrid biological method with UV/O<Subscript>3</Subscript> oxidation and membrane separation for treatment and reuse of industrial laundry wastewater

The possibilities of application of a three-step system combining hybrid biological treatment followed by advanced UV/O₃ oxidation with in situ generated O₃ and membrane separation (ultrafiltration (UF) and nanofiltration (NF)) to treat and reuse the wastewater from an industrial laundry are presented. By the application of a hybrid moving bed biofilm reactor (HMBBR), the total organic carbon concentration was reduced for about 90 %. However, since the HMBBR effluent still contained organic contaminants as well as high concentrations of inorganic ions and exhibited significant turbidity (8.2 NTU), its further treatment before a possible reuse in the laundry was necessary. The UV/O₃ pretreatment prior to UF was found to be an efficient method of the membrane fouling alleviation. During UF, the turbidity of wastewater was reduced below 0.3 NTU. To remove the inorganic salts, the UF permeate was further treated during NF. The NF permeate exhibited very low conductivity (27–75 μS/cm) and contained only small amounts of Ca²⁺ and Mg²⁺; thus ,it could be reused at any stage of the laundry process.     

The impact of environmental contamination with antibiotics on levels of resistance in soil bacteria

This study examined the effects of tetracycline and streptomycin on microorganisms in three different soil habitats: forest soil, agricultural soil, and compost. These antibiotics are commonly used in both medical and veterinary therapy as well as in the production of plant biomass and until quite recently, the production of animal biomass. Microcosms were used as model systems in which the number of microorganisms in environments containing different amounts of antibiotics was analyzed. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of tetracycline and streptomycin were determined. The MIC and MBC values of tetracycline against the tested strains were 20 to 180 microg/ mL and 30 to 300 microg/mL, respectively, and of streptomycin, 360 to 500 microg/mL and > or =500 microg/mL, respectively. Resistant bacterial strains were identified and their physiological profiles assessed. Streptomycin and tetracycline were found to reduce the number of bacteria in the studied soils by between 50 and 80%. Soil bacteria were found to be more resistant to streptomycin than to tetracycline. The bacterial species showing the highest resistance to tetracycline were Rhizobium radiobacter, Burkholderia cepacia, Brevundimonas vesicularis, and Pasteurella multocida. Most soils with high concentrations of streptomycin (5 mg/kg) contained Rhizobium radiobacter, Burkholderia cepacia, and Sphingomonas multivorum, among others. The strains most resistant to tetracycline were isolated from agricultural soil that is constantly subjected to tetracycline pressure from animal manures and biosolids. Among resistant strains, opportunistic pathogens were identified.     

Modelling the aerobic degradation of organic wastes based on slowly and rapidly degradable fractions

Several organic wastes of major production in the world (municipal solid wastes, wastewater sludge, manures and bulking agents) and some already treated organic wastes have been investigated to determine the partition among the several fractions that compose them and their kinetics of biodegradation. Different literature models have been explored for their suitability to predict the behaviour in respiration studies of these wastes. All the models presented limitations related to their simplicity or their excessive complexity, which makes them unsuitable for reliable and fast studies at real scale. A new model based on the rapid, the slowly and the inert organic fractions has been tested for all the wastes, showing excellent correlations with actual respiration activity. Finally, the kinetic parameters for this model in its application to all the wastes studied are presented.     

Home composting versus industrial composting: Influence of composting system on compost quality with focus on compost stability

Stability is one of the most important properties of compost obtained from the organic fraction of municipal solid wastes. This property is essential for the application of compost to land to avoid further field degradation and emissions of odors, among others. In this study, a massive characterization of compost samples from both home producers and industrial facilities is presented. Results are analyzed in terms of chemical and respiration characterizations, the latter representing the stability of the compost. Results are also analyzed in terms of statistical validation. The main conclusion from this work is that home composting, when properly conducted, can achieve excellent levels of stability, whereas industrial compost produced in the studied facilities can also present a high stability, although an important dispersion is found in these composts. The study also highlights the importance of respiration techniques to have a reliable characterization of compost quality, while the chemical characterization does not provide enough information to have a complete picture of a compost sample.     

Optimization of the intermittent aeration in a full-scale wastewater treatment plant biological reactor for nitrogen removal.

The optimization of the intermittent aeration in a full-scale biological reactor treating municipal and industrial wastewater has been studied by means of an experimental design, where the main factors considered have been the on-off period of aeration and the dissolved-oxygen set point. The objective of the work has been to determine the optimal configuration of the aeration control to achieve a simultaneous removal of carbon (expressed as chemical oxygen demand [COD]) and nitrogen. The results were obtained in a full-scale bioreactor located at the wastewater treatment plant of Sant Celoni (Barcelona, Spain), where a nitrogen removal based on a nitrification-denitrification process is being tested. It has been shown that the crucial parameter to ensure a complete removal of COD and nitrogen is to give the system a long time of on-off aeration to complete both the nitrification and the denitrification processes, whereas the dissolved-oxygen set point has a minor influence on the overall performance. The results presented can be applied to a great number of similar systems, in which a nitrogen removal, based on a nitrification-denitrification scheme, is currently being tested or implemented.