Agricultural nitrate monitoring in a lake basin in Central Italy: a further step ahead towards an integrated nutrient management aimed at controlling water pollution

Water pollution from point sources has been considerably reduced over the last few decades. Nevertheless, some water quality problems remain, which can be attributed to non-point pollution sources, and in particular to agriculture. In this paper the results of a study intended to assess the consequences, in terms of NO₃ water pollution, of growing a crop, whose impact in terms of P pollution is already well known, are presented. The potential consequences, in terms of water pollution from nitrates of a BMP expressly applied to reduce P pollution are also discussed. The study site is the Lake Vico basin, Central Italy, which has suffered a shift in trophic state since the mid 1990s, caused by P compounds used for intensive cultivation of hazelnut trees. The results of the monitoring campaign described in this paper allow to assert that hazelnut tree cropping has probably caused a considerable increase in nitrate concentration in the groundwater, although not in the lake water, because of the specific hydrogeological characteristics of the basin. The main conclusion is that monitoring is essential to single out environmental characteristics peculiar of a specific area, which even the most sophisticated model would not have been able to highlight. This is why monitoring and model simulations should be integrated.     

Monitoring the fall of large atmospheric ice conglomerations: a multianalytical approach to the study of the Mejorada del Campo megacryometeor

Certain local atmospheric anomalies, such as the formation of unusually large ice conglomerations (megacryometeors), have been proposed to be a potential natural hazard for people and aviation, as well as geoindicators for fingerprinting larger-scale atmospheric environmental changes. On March 13th 2007, at approximately 10:15 am, an ice chunk weighing about 10 kg fell from the clear-sky and crashed through the roof (around 15 m) of an industrial storage house in Mejorada del Campo, a town located 20 km east from Madrid. The megacryometeor monitoring follow-up and the original investigation presented here includes, for the first time, both logistic and scientific collaboration between the Laboratory of the Environment, Criminalistic Service (SECRIM, the Spanish "Guardia Civil") and academic and scientific institutions (universities and the Spanish National Research Council). We propose that the management procedure of the incident, along with the detailed scientific research and combination of analytical methodologies in different laboratories, can serve as a protocol model for other similar events.     

Application and evaluation of the neutral red retention (NRR) assay for lysosomal stability in mussel populations along the Iberian Mediterranean coast

The neutral red retention (NRR) assay to determine lysosomal membrane stability (LMS) was applied to wild mussels (Mytilus galloprovincialis) sampled from fourteen sites with different degrees of chemical pollution along the Iberian Mediterranean coast in 2002 and 2003. Total body burdens for a range of contaminants were measured in pooled samples (n = 50) of whole soft tissues in order to explore possible causality. Mean LMS values (n = 15) were significantly greater in mussels from one of the selected two reference sites (San Diego) than in chemically well-characterized hotspot sites. Mean LMS values were inversely correlated with contaminant concentrations in mussel tissues (except for Zn). The multidimensional scaling ordination technique classified the sampling sites into three groups according to their chemical-physical-biological similarities and the results were statistically confirmed using ANOSIM analysis. The results show that lysosomal stability is an effective indicator of health status in mussels along the Iberian Mediterranean coast and that it is related to body burden of contaminants, particularly polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs).     

Agricultural Land Use and Best Management Practices to Control Nonpoint Water Pollution

In recent years, improvements in point-source depuration technologies have highlighted the problems regarding agricultural nonpoint (diffuse) sources, and this issue has become highly relevant from the environmental point of view. The considerable extension of the areas responsible for this kind of pollution, together with the scarcity of funds available to local managers, make minimizing the impacts of nonpoint sources on a whole basin a virtually impossible task. This article presents the results of a study intended to pinpoint those agricultural areas, within a basin, that contribute most to water pollution, so that operations aimed at preventing and/or reducing this kind of pollution can be focused on them. With this aim, an innovative approach is presented that integrates a field-scale management model, a simple regression model, and a geographic information system (GIS). The Lake Vico basin, where recent studies highlighted a considerable increase in the trophic state, mainly caused by phosphorus (P) compounds deriving principally from the intensive cultivation of hazelnut trees in the lake basin, was chosen as the study site. Using the management model Groundwater Loading Effects of Agricultural Management Systems (GLEAMS), the consequences, in terms of sediment yield and phosphorus export, of hazelnut tree cultivation were estimated on different areas of the basin with and without the application of a best management practice (BMP) that consists of growing meadow under the trees. The GLEAMS results were successively extended to basin scale thanks to the application of a purposely designed regression model and of a GIS. The main conclusions can be summarized as follows: The effectiveness of the above-mentioned BMP is always greater for erosion reduction than for particulate P reduction, whatever the slope value considered; moreover, the effectiveness with reference to both particulate P and sediment yield production decreases as the slope increases. The proposed approach, being completely distributed, represents a considerable step ahead compared to the semidistributed or lumped approaches, which are traditionally employed in research into tools to support the decision-making process for land-use planning aimed at water pollution control.     

Batch test assessment of waste-to-energy combustion residues impacts on precipitate formation in landfill leachate collection systems

Disposal practices for bottom ash and fly ash from waste-to-energy (WTE) facilities include emplacement in ash monofills or co-disposal with municipal solid waste (MSW) and residues from water and wastewater treatment facilities. In some cases, WTE residues are used as daily cover in landfills that receive MSW. A recurring problem in many landfills is the development of calcium-based precipitates in leachate collection systems. Although MSW contains varying levels of calcium, WTE residues and treatment plant sludges have the potential to contribute concentrated sources of leachable minerals into landfill leachates. This study was conducted to evaluate the leachability of calcium and other minerals from residues generated by WTE combustion using residues obtained from three WTE facilities in Florida (two mass-burn and one refuse-derived fuel). Leaching potential was quantified as a function of contact time and liquid-to-solid ratios with batch tests and longer-term leaching tests using laboratory lysimeters to simulate an ash monofill containing fly ash and bottom ash. The leachate generated as a result of these tests had total dissolved solid (TDS) levels ranging from 5 to 320 mg TDS/g ash. Calcium was a major contributor to the TDS values, contributing from 20 to 105 g calcium/kg ash. Fly ash was a major contributor of leachable calcium. Precipitate formation in leachates from WTE combustion residues could be induced by adding mineral acids or through gas dissolution (carbon dioxide or air). Stabilization of residual calcium in fly ashes that are landfilled and/or the use of less leachable neutralization reagents during processing of acidic gases from WTE facilities could help to decrease the calcium levels in leachates and help to prevent precipitate formation in leachate collection systems.     

Ranking potential impacts of priority and emerging pollutants in urban wastewater through life cycle impact assessment

Life cycle impact assessment (LCIA), a feature of the Life cycle assessment (LCA) methodology, is used in this work outside the LCA framework, as a means to quantify the potential environmental impacts on ecotoxicity and human toxicity of wastewater containing priority and emerging pollutants. In order to do this, so-called characterisation factors are obtained for 98 frequently detected pollutants, using two characterisation models, EDIP97 and USES-LCA. The applicability of this methodology is shown in a case study in which wastewater influent and effluent samples from a Spanish wastewater treatment plant located in the Mediterranean coast were analysed. Characterisation factors were applied to the average concentration of each pollutant, obtaining impact scores for different scenarios: discharging wastewater to aquatic recipient, and using it for crop irrigation. The results show that treated wastewater involves a substantially lower environmental impact when compared to the influent, and pharmaceuticals and personal care products (PPCPs) are very important contributors to toxicity in this wastewater. Ciprofloxacin, fluoxetine, and nicotine constitute the main PPCPs of concern in this case study, while 2,3,7,8-TCDD, Nickel, and hexachlorobenzene are the priority pollutants with highest contribution. Nevertheless, it must be stressed that the new characterisation factors are based on very limited data, especially with regard to toxicology, and therefore they must be seen as a first screening to be improved in the future when more and higher quality data is available.     

The influence of temperature on the deactivation of commercial Pd/Rh automotive catalysts

Automotive catalyst deactivation can be promoted by thermal and poisoning mechanisms. Catalyst efficiency is reduced by thermal degradation resulting in the agglomeration of precious metals and the reduction of the washcoat surface area. In this paper, the temperature influence on the commercial Pd/Rh-based automotive catalyst performance was studied. Textural and physicochemical characterisation techniques were employed, such as X-ray fluorescence (XRF), atomic absorption spectrometry (AAS), N₂ physisorption, X-ray diffraction (XRD), temperature programmed reduction (TPR) and scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM–EDX). The catalysts were evaluated for CO and propane oxidation with a stoichiometric gas mixture similar to engine exhaust gas. The results indicated the transformation of alumina into high temperature phases and the formation of new mixed oxide phases. Evidence of sintered particles and several spots of palladium agglomerates was seen by SEM–EDX analysis. The activity results showed the effects of thermal deactivation on the conversion of the pollutants. In spite of exposure to extreme temperature conditions (72 h at 1200 °C), significant activity was still observed for carbon monoxide and propane oxidation reactions.     

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber–matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.     

Behavior, distribution and variability of surface ozone at an arid region in the south of Iberian Peninsula (Seville, Spain)

In order to improve our knowledge of the surface ozone in the south of the Iberian Peninsula, annual, monthly, weekly and daily ozone concentrations have been closely monitored in the Seville metropolitan area highlighting those episodes that exceed the European Ozone Directive. A three-year period (2003-2005) and eight ozone stations were used; five of them located in the city's busiest areas and the rest in adjacent zones ( approximately 25km). In addition, the wind regime was also studied in order to understand the main characteristics of the surface atmospheric dynamics. The lowest ozone concentrations 17-33microgm(-3) took place in January while the highest 57-95microgm(-3) occurred in June. The ozone concentration week-weekend differences from May to September indicate that this phenomenon does not affect the ozone stations analysed. Daily cycles show minimum values between 7:00 and 8:00 UTC and maximum at noon, exceeding 90microgm(-3) during summer months. From March to October the ozone concentrations were above the target value for the protection of human health, especially during the summer months, with values up to 30% over the limit. The information threshold has been exceeded at all ozone stations studied but with greater frequency in the stations far from the city centre. In addition, at these latter stations the alert threshold was also exceeded on six occasions. This study in the city of Seville indicates that the high ozone levels are due to local atmospheric effects, mainly since the ozone air masses may undergo recirculation processes. The ozone is transported to the city from the S-SW, having a major impact in the NE areas.