Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and pure cultures of imperfect and lignolitic fungi

The biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and seven fungi species, including imperfect strains and higher level lignolitic species, is compared in a 90-day laboratory experiment using a natural, not-fertilized soil contaminated with 10% crude oil. The natural microbial soil assemblage isolated from an urban forest area was unable to significantly degrade crude oil, whereas pure fungi cultures effectively reduced the residues by 26-35% in 90 days. Normal alkanes were almost completely degraded in the first 15 days, whereas aromatic compounds (phenanthrene and methylphenanthrenes) exhibited slower kinetics. Aspergillus terreus and Fusarium solani, isolated from oil-polluted areas, produced the more efficient attack of aliphatic and aromatic hydrocarbons, respectively. Overall, imperfect fungi isolated from polluted soils showed a somewhat higher efficiency, but the performance of unadapted, indigenous, lignolitic fungi was comparable, and all three species, Pleurotus ostreatus, Trametes villosus and Coriolopsis rigida, effectively degraded aliphatic and aromatic components. The simultaneous, multivariate analysis of 22 parameters allowed the elucidation of a clear reactivity trend of the oil components during biodegradation: lower molecular weight n-alkanes > phenanthrene > 3-2-methylphenanthrenes > intermediate chain length n-alkanes > longer chain length n-alkanes > isoprenoids approximately 9-1-methylphenanthrenes. Irrespective of the individual degrading capacities, all fungi species tested seem to follow this decomposition sequence.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

The effect of papermill wastewater and organic amendments of sodium accumulation by potted cottonwoods

In this experiment, the impacts of pulp mill effluent irrigation, Fraser cottonwood (Populus deltoides 'Fraser') seedlings, and pulp sludge and manure soil amendments on sodium accumulation and distribution in the soil profile were evaluated during a 6 month greenhouse study. Sludge soil amendments and wastewater irrigation did not reduce stem biomass production of the cottonwood. Increased stem biomass production associated with manure soil amendments resulted in greater total uptake of sodium into stem material. This uptake was 0.002% of wastewater sodium inputs. In containers with seedlings, sodium concentrations were less in the surface horizon and more in the lower horizons than in containers with no seedlings. Infiltration rates and total sodium accumulation in the soil profile were not affected by the presence of Fraser cottonwood or the application of sludge or manure amendments to soil.     

Vertical gradients of ozone and carbon dioxide within a deciduous forest in Central Pennsylvania

Ambient concentrations of ozone (O(3)) and carbon dioxide (CO(2)) were measured at locations from the forest floor to the top of the canopy in a deciduous forest at the Moshannon State Forest in northcentral Pennsylvania. O(3) concentrations were measured from May-September for three years (1993-1995) while CO(2) concentrations were measured only during July and August of 1994. O(3) concentrations increased steadily during the day at all locations, peaking during the middle to late afternoon hours. O(3) concentrations then steadily declined to their lowest point, just before dawn. Vertical O(3) concentration gradients varied seasonally and among years. However, O(3) concentrations were highest within the forest canopy and lowest at the forest floor, with an average difference of approximately 13%. Differences in O(3) concentrations between the canopy and forest floor were greatest at night. O(3) concentrations were slightly higher at locations within the canopy than above the canopy. CO(2) concentrations were consistenly higher near the forest floor and were higher above the canopy than within the canopy. CO(2) concentrations were higher at night than during the day at all locations, especially near the forest floor.     

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.     

Influence of reduced dietary calcium on the accumulation and effects of lead, cadmium, and aluminum in birds

The influence of low dietary calcium on the accumulation and effects of dietary lead, cadmium and aluminum was examined in zebra finches and ring doves. In zebra finches fed a diet containing 0.3% Ca, the hepatic and renal accumulation of lead was enhanced approximately 400% and of cadmium about 150-200%, compared to birds fed a 3.0% Ca diet. Low dietary Ca also caused bones of female finches to lose an average of about 60% of their normal Ca content. Loss of bone-Ca was also observed in male finches, but was less than in females. In reproductively active ring doves, low (0.4%) dietary Ca enhanced the accumulation of lead and cadmium, but not of aluminum, compared with accumulation in doves consuming a 2.0% Ca diet. Enhanced accumulation of lead and cadmium was accompanied by increased synthesis of the metal-binding protein metallothionein and by greater inhibition of delta-aminolevulinic acid dehydratase activity. These results indicate that, under conditions of reduced dietary Ca availability, such as can occur in acid-impacted environments, wild birds risk increased uptake of certain toxic metals and may accumulate toxic concentrations of these metals more rapidly. Researchers should take account of dietary Ca levels when interpreting results of dosing studies in which metals such as lead and cadmium are administered to birds.     

Selectivity in the complexation of actinides by humic substances

The interactions of a range of actinide elements (Th, U, Np, Pu, Am) with humic substances from the Needle's Eye natural analogue site were studied by gel permeation chromatography. Bulk humic substances were isolated by ammonia extraction, followed by dialysis against distilled water and freeze-drying. The gel permeation results suggest that Needle's Eye humic substances can be fractionated into three incompletely resolved fractions with average molecular weights determined by analytical ultracentrifugation around 49 000 for Fraction 1, around 14 700 for Fraction 2 and around 8000 for Fraction 3. Although there are significant differences between the organic matter elution patterns in individual gel permeation experiments, presumably due to differences in column packing, these are much smaller than the differences between metal ions. The uranium that is naturally present in these humic substances is largely bound in the late-eluting fraction. Spikes of the early actinides, including Np and Pu in controlled valency states, have been added to the humic substances, and gel permeation of the spiked humic substances shows that the three humic fractions vary greatly in their effectiveness and selectivity as ligands for early actinides.     

The influence of particle surface characteristics on pollutant metal uptake by cells

The phosphatic mineral, hydroxyapatite, and two ion exchange resins have been used as artificial sediment particles. The surface properties of these materials have been studied using the Langmuir adsorption isotherm to calculate the binding capacity (B(max)) and the adsorption constant (K(L)) for zinc and cadmium ions. Mussels (Mytilus edulis) were fed on the particles and their digestive glands were subsequently removed and subjected to cell fractionation. The supernatant fraction was used to determine cytosol metal levels as a measure of the materials absorbed from the ingested particles. The level of cytosol zinc and cadmium was correlated with the K(L) values of the artificial sediments. It is suggested that phagocytosis of sediment particles plays an important part in transferring pollutants into benthic organisms and that the efficiency of this process is related to the adsorption coefficient of the particle surfaces.