Characterization and validation of a Portuguese natural reference soil to be used as substrate for ecotoxicological purposes

This study describes the first attempt to validate a Portuguese natural soil (PTRS1) to be used as reference soil for ecotoxicological purposes, aimed to both: (i) obtain ecotoxicological data for the derivation of Soil Screening Values (SSVs) with regional relevance, acting as a substrate to be spiked with ranges of concentrations of the chemicals under evaluation and (ii) act as control and as substrate for the dilution of contaminated soils in ecotoxicological assays performed to evaluate the ecotoxicity of contaminated soils, in tier 2 of risk assessment frameworks, applied to contaminated lands. The PTRS1 is a cambisol from a granitic area integrated in the Central Iberian Zone. After chemical characterization of the soil in terms of pseudo-total metals, PAHs, PCBs and pesticide contents, it was possible to perceive that some metals (Ba, Be, Co, Cr and V) surpass the Dutch Target Values (Dtvs) corrected for the percentage of organic matter and clay of the PTRS1. Nevertheless, these metals displayed total concentrations below the background total concentrations described for Portuguese soils in general. The same was observed for aldrin, endosulfan I, endosulfan II, heptachlor epoxide, and heptachlor; however the Dtvs corrected become negligible. The performance of invertebrate and plant species, commonly used in standard ecotoxicological assays, was not compromised by both soil properties and soil metal contents. The results obtained suggest that the PTRS1 can be used as a natural reference soil in ecotoxicological assays carried out under the scope of ecological risk assessment.     

Chromium fractionation and speciation in natural waters

It is common for leather industries to dump chromium-contaminated effluent into rivers and other bodies of water. Thus, it is crucial to know the impacts caused by this practice to the environment. A study on chromium partitioning and speciation, with determination at trace levels, was carried out in a potentially contaminated creek. Chromium fractionation and speciation was performed using a flow-injection preconcentration system and detection by flame atomic absorption spectrometry. High levels of this element were found in the particulate material (449-9320 mg kg(-1)), which indicates its compatibility with this fraction. The concentration of Cr(iii) in the water samples collected ranged from 5.2-105.2 μg L(-1). Cr(vi) was always below of the DL (0.3 μg L(-1)). Chromium accumulation observed in the sediment (873-1691 mg kg(-1)) may confirm contamination due to the long term release of contaminated effluents in the creek.     

Development of a robust chromatographic method for the detection of chlorophenols in cork oak forest soils

A major concern for the cork and wine industry is ‘cork taint’ which is associated with chloroanisoles, the microbial degradation metabolites of chlorophenols. The use of chlorophenolic compounds as pesticides within cork forests was prohibited in 1993 in the European Union (EU) following the introduction of industry guidance. However, cork produced outside the EU is still thought to be affected and simple, robust methods for chlorophenol analysis are required for wider environmental assessment by industry and local environmental regulators. Soil samples were collected from three common-use forests in Tunisia and from one privately owned forest in Sardinia, providing examples of varied management practice and degree of human intervention. These provided challenge samples for the optimisation of a HPLC-UV detection method. It produced recoveries consistently >75 % against a soil CRM (ERM-CC008) for pentachlorophenol. The optimised method, with ultraviolet (diode array) detection is able to separate and quantify 16 different chlorophenols at field concentrations greater than the limits of detection ranging from 6.5 to 191.3 μg/kg (dry weight). Application to a range of field samples demonstrated the absence of widespread contamination in forest soils at sites sampled in Sardinia and Tunisia.     

Offshore drilling effects in Brazilian SE marine sediments: a meta-analytical approach

The exploration and production of oil and gas reserves often result to drill cutting accumulations on the seafloor adjacent to drill locations. In this study, the detection of drilling influence on marine sediments was performed by meta-analytical comparison between data from pre- and post-drilling surveys undertaken in offshore Campos Basin, southeast of Brazil. Besides this overall appraisal on the geochemical variables, a multivariate assessment, considering only the post-drilling data, was performed. Among the variables, fines content, carbonates, total organic carbon, barium, chromium, copper, iron, manganese, nickel, lead, vanadium, zinc, and total petroleum hydrocarbons, only barium, copper, and hydrocarbons were related to drilling impacts. In relation to the point of discharge, relative elevated levels in the post-drilling campaigns were observed preferentially up to 500 m in the northeast and southwest directions, associated to the Brazil Current-predominant direction. Other distributed concentrations in the surroundings seem to indicate the dilution and dispersion of drilling waste promoted by meteoceanographic factors.     

Utilization of UV‐A and UV‐C radiation in advanced oxidation processes with the intention of removing color and organic matter from the gross leachate of a stabilized sanitary landfill

The present work investigated color and biochemical oxygen demand (COD) removal from treated landfill leachate via advanced oxidative processes (AOPs) artificially emitted. The AOP H₂O₂/UV, TiO₂/UV, and photolysis were tested in two bench‐scale photoreactors: The first one with UV‐C lamp and the other with UV‐A lamp associated or not with coagulation / flocculation pretreatment. Crude leachate samples with pH ranging from 8 to 3 were used, and time varied in 30, 45, and 60 minutes. Experiments were performed in two stages: step 1 with a 20 mL volume from each sample and step 2 with repetition of the best results from the previous step, adopting the 150 mL volume. In step 1, the AOP applied in the crude leachate sample showed the best results, standing out H₂O₂/UV‐C with 30 minutes and TiO₂/UV‐A with 60 minutes. In step 2, H₂O₂/UV‐C had a 60% color removal and 25% COD reduction, while TiO₂/UV‐A had a 10% color removal and 20% COD reduction. Therefore, the H₂O₂/UV‐C process was the most efficient, because the complex characteristics of the effluent interfered in the TiO₂/UV‐A efficiency, but it is necessary to eliminate the process interferences. The use of artificial radiation is a viable alternative; however, it can be costly, being relevant in the associations between processes with artificial UV and solar UV, as the natural radiation becomes more attractive and allows the process operating costs reduction.     

Evaluation of an approach for the characterization of reactive and available pools of 20 potentially toxic elements in soils: part II--solid-solution partition relationships and ion activity in soil solutions

To assess environmental risks related to contaminants in soil it is essential to predict the available pool of inorganic contaminants at regional scales, accounting for differences between soils from variable geologic and climatic origins. An approach composed of a well-accepted soil extraction procedure (0.01 M CaCl(2)) and empirical Freundlich-type models in combination with mechanistically based models which to date have been used only in temperate regions was applied to 136 soils from a South European area and evaluated for its possible general use in risk assessment. Empirical models based on reactive element pools and soil properties (pH, organic carbon, clay, total Al, Fe and Mn) provided good estimations of available concentrations for a broad range of contaminants including As, Ba, Cd, Co, Cu, Hg, Mo, Ni, Pb, Sb, Se and Zn (r(2): 0.46-0.89). The variation of the pools of total Al in soils expressed the sorptive capacity of aluminosilicates and Al oxides at the surfaces and edges of clay minerals better than the actual variability of clay contents. The approach has led to recommendations for further research with particular emphasis on the impact of clay on the solubility of As and Sb, on the mechanisms controlling Cr and U availability and on differences in binding properties of soil organic matter from different climatic regions. This study showed that such approach may be included with a good degree of certainty for first step risk assessment procedures to identify potential risk areas for leaching and uptake of inorganic contaminants in different environmental settings.     

Degradation of phenols in olive oil mill wastewater by biological,enzymatic, and photo-Fenton oxidation

Background, aim, and scope  

Olive oil mill wastewater (OOMW) environmental impacts minimization have been attempted by developing more effective processes, but no chemical or biological treatments were found to be totally effective to mitigate their impact on receiving systems. This work is the first that reports simultaneously the efficiency of three different approaches: biological treatment by two fungal species (Trametes versicolor or Pleurotus sajor caju), enzymatic treatment by laccase, and chemical treatment by photo-Fenton oxidation on phenols removal.     

First Step for an Ecological Risk Assessment to Evaluate the Impact of Diffuse Pollution in Lake Vela (Portugal)

Lake Vela, located in the Portuguese littoral-centre, is a temperate shallow lake exhibiting a high trophic status. This aquatic ecosystem has been potentially exposed to contamination generated by agricultural and livestock activities held in their drainage basin, which seriously compromise their health. This work summarizes some background information and presents the problem formulation step of the ERA. Therefore, it evaluates the characteristics of the stressor(s), describes the ecological system and receptors and suggests a conceptual model, which predicts the potential exposure pathways, relating suspected sources to the defined endpoints. This introductory step also described an analysis plan on the entire study, which includes a delineation of the assessment design, data needs, measures, and methods for conducting the analysis phase of the risk assessment process.     

Biological activities of the essential oil from the leaves of Lantana montevidensis (Spreng) Briq. in mice

Environment, Development and Sustainability - This work aimed to analyze the chemical composition and evaluate the anti-inflammatory and antinociceptive properties of the essential oil obtained...     

Monitoring of ambient air PCDD/F levels in Portugal

As part of a monitoring program conducted by IDAD--Institute for Environment and Development and supported by regional municipal solid waste (MSW) management authorities, dioxin concentrations in ambient air were measured in three regions of Portugal: Porto, Lisbon and Madeira. These independent studies were performed with the intention of providing data as a basis for the evaluation of potential impacts of the operation of recently built MSW incinerators. Thus, 170 samples were collected in nine different sites from January 1999 till present. The measured levels revealed an extremely variable content of PCDDs/PCDFs depending both on the area and the season of the year. Samples taken in Porto and Lisbon reveal a similar homologue structure even if concentrations measured in the Porto region are significantly greater. Data from Madeira is characteristic of a remote site with some of the congeners concentrations below the detection limit.