Recovery of critical metals from leach solution of electronic waste using magnetite electrospun carbon nanofibres composite

Environmental Science and Pollution Research - Scarcity in mining and geo-political direction diverts attention toward critical metal recycling. Gallium (Ga), indium (In) and germanium (Ge) are...     

Indoor and outdoor air PBDE levels in a Southwestern US city

Levels of polybrominated diphenyl ether (PBDE) flame retardants have been increasing in humans and the environment for the past few decades. Human levels are markedly higher in the US than Europe. Although food appears to be a significant route of intake, food PBDE levels are not substantially higher in the US than Europe. House and office dust appear to be major routes of exposure with air believed to usually provide a lesser route of intake. Because there are very few measurements of airborne PBDE that have been performed in relevant microenvironments in the US, increased efforts to assess airborne PBDE in the US as sources of exposure are needed. This study reports, for the first time from a Southwestern US city in Texas, the results of measurements of airborne PBDE in multiple locations, two outdoor and six indoor (residential and office) from active air sampling with collection of a combination of both vapor- and particulate-phase PBDE. Higher PBDE levels were measured in indoor than outdoor air, which confirms previous findings. Of 11 measured congeners including BDE 209, total PBDE levels in two outdoor air samples were 112 and 125 pg m^?3 and the indoor air levels ranged from 175 to 1232 pg m^?3 with a median of 572 pg m^?3. These findings suggest that sources of air contamination with PBDE may be similar in Texas as elsewhere in North America. However, more sampling is required to (1) better determine if this is the case and (2) attempt to characterize potential sources of PBDE contamination in both indoor and outdoor air by analysis of congener patterns.     

Assessment of toxicity of two types of drill cuttings from a drilling rig on the Trinidad East coast using Metamysidopsis insularis

This study investigated the relative toxicity of water-based cuttings (WBC) and synthetic oil-based cuttings (SOBC) to the marine species, Metamysidopsis insularis. Results obtained indicate that SOBC (LC₅₀ 1.2 (0.85–1.6)%) was more toxic to M. insularis than WBC (LC₅₀ 9.9 (8.3–11.8)%), with similar metal contents in both types of cuttings. The elevated levels of metals found in the cuttings when compared to surficial sediments may be due to both drilling fluids, as well as the rock strata from which the cuttings were obtained. Furthermore, total petroleum hydrocarbon (TPH) analyses demonstrated significantly higher concentrations of TPH present in SOBC (14,680?±?1250?mg?kg^?1) compared to WBC (860?±?115?mg?kg^?1). This may also be due to the increased depth and hence oil bearing rock formations in the selected sampling area, along with the associated synthetic oil-based drilling fluid. These findings therefore supply evidence that drill cuttings after treatment prior to discharge are potentially toxic to marine organisms.     

Magnetic particles precipitated onto wheat husk for removal of methyl blue from aqueous solution

Magnetic particles prepared via co-precipitation and impregnated onto wheat husk (MN-WH) were used for the removal of methyl blue (MB) from aqueous solution. Experiments were conducted in a batch mode for optimization regarding pH, contact time, adsorbent dose, initial dye concentrations, and temperature. Maximum adsorption (98%) was achieved at pH 5. The adsorption data were fitted into pseudo-first, pseudo-second, intraparticle diffusion, and Elovich equation revealing that adsorption followed pseudo-second-order kinetics. The four most common isotherm models, i.e. the Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich (D–R), were used to evaluate the data, with the best fit to a Langmuir isotherm (R² = 0.996), followed by a Freundlich isotherm (R² = 0.995), indicating monolayer adsorption of MB on the surface of MN-WH. Thermodynamic parameters calculated from the Van't Hoff equation revealed that the adsorption is exothermic (ΔHº = ?19.7 kJ mol^?1).     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.     

Scalp hair metal analysis in the assessment of the occupational exposure of arc welders

Eleven metals (Ca, Mg, Fe, Zn, Cu, Mn, Cd, Co, Cr, Ni and Pb) were estimated in hair samples of metal arc welders and a control group with the same socioeconomic background. Nitric acid–perchloric acid wet digestion procedure was adopted for the estimation of endogenous metal contents by ICP-AE technique. The study exhibited the following increasing order of the metal concentrations: Cd??1, dry weight, respectively. On average, the levels of Mn, Ni, Pb and Fe were found to be 1.5–2.4 times higher in the hair of welders compared with controls. Besides age and exposure which were strongly correlated, Cu–Mg, Mn–Mg, Ca–Co and Cd–Zn also showed significantly positive correlations. The identification of metal sources, done by cluster and principal component analyses, revealed four factors: age and exposure; Cu, Mg, Mn and Fe; Ca and Co; Cd, Zn, Ni and Pb. High levels of Fe were found to have a depleting impact on Co levels. The arc welders were feared to accumulate heavy metals in their bodies due to long-term endogenous exposure.     

Microwave-Induced Modification of Physical and Functional Characteristics and Antioxidant Potential of Alkali-Soluble Cell Wall Polysaccharides of Nelumbo nucifera Rhizome

Journal of Polymers and the Environment - The alkali-soluble cell wall polysaccharides (CWPs), extracted from Nelumbo nucifera rhizome flour (NNRF), were treated with microwave radiation to modify...     

Seed maturity indices in Aisandra butyracea--a multipurpose tree species of lower Himalaya

Fruits of Aisandra butyracea (Roxb.) Lamb. were collected from two sites located at different altitudes in Kumaun Himalaya for analyzing the seed maturity in relation to various fruit and seed characters. The mean seed size (length x width) across the collection dates varied between 186.44 +/- 0.05 and 238.17 +/- 0.5 mm2 across both the elevations. The fruit colour changed from dark green in the beginning to pale yellow on the maturity. The range of seed moisture content (62.83 +/- 1.33 to 63.46 +/- 0.89%) coincided with maximum germination. The colour change and seed moisture content appear to be the major indicators of seed maturation in A. butyracea.     

Developing the first halophytic turfgrasses for the urban landscape from native Arabian desert grass

Environmental Science and Pollution Research - Climate change is occurring and is influencing biological systems through augmented temperatures, more inconstant precipitation, and rising CO2 in the...