The role of daytime cues in the development of magnetic orientation in a night-migrating bird

To assess the role of celestial rotation during daytime in the development of the magnetic compass course, pied flycatchers (Ficedula hypoleuca Pallas, Muscicapidae) were handraised in Latvia under various celestial and magnetic conditions. Tests were performed during autumn migration in the local geomagnetic field (50 000 nT, 73° inclination) in the absence of celestial cues. A group of birds that had never seen the sky showed a bimodal preference for the migratory southwest-northeast axis, whereas a second group that had been exposed to the natural sky from sunrise to sunset in the local geomagnetic field showed a unimodal preference for the seasonally appropriate southwesterly direction. A third group that had also been exposed to the daytime sky, but in the absence of magnetic compass information, also oriented bimodally along a southwest-northeast axis. These findings demonstrate that observing celestial rotation during daytime enables birds to choose the right end of the migratory axis for autumn migration at the Latvian test location. This transformation of axial behavior into appropriate migratory orientation, however, requires the birds to have simultaneous access to information on both celestial rotation and the geomagnetic field. Received: 19 September 1997 / Accepted after revision: 22 November 1997     

Spawning behaviour and sex hormone levels in adult and precocious brown trout (Salmo trutta L.) males and the effect of anosmia

Summary. In the present experiment the behaviour and endocrine status of males of the brown trout, Salmo trutta L., (Salmoniformes: Salmonidae) were studied when males were kept in a stream tank with a nest digging female. Groups of mature adult males and precocious intact or anosmic male parr were placed with the nesting female so that the group resembled a natural spawning situation with big anadromous fish acting as dominant males and precocious parr acting as “sneakers”. A control experiment was also run with only males without a female present. In intact parr there were significant positive correlations between the per cent of the total observation time spent with a female, milt volume, and plasma concentration of 17α, 20β-dihydroxy-4-pregnen-3-one. Anosmic parr had significantly lower volumes of strippable milt and gonadal steroid hormone levels compared with intact parr. However, no differences were found in the control experiment. Significantly fewer anosmic parr attended and courted the nesting female and those anosmic fish that attended the female had significantly lower plasma levels of gonadal hormones. Intact parr also displayed a greater number of agonistic acts against other parr without any difference in fighting ability. No differences in aggression occured in the control experiment. In adult males together with a female, post-experimental gonadal steroid hormone levels were higher than pre-experimental levels. Positive correlations between aggression and androgen hormone levels were observed in adult males. No differences in plasma hormone levels were observed between adult males and intact precocious males. The results show that olfactory occlusion results in low steroid hormone levels and milt volumes in precocious males placed in a spawning situation. The courting behaviour was also affected by anosmia. Odours from the nesting female may have caused the enhanced plasma hormone levels and stimulated the males to attend the female. Received 15 May 1997; accepted 29 June 1997.     

Restricted adaptive cluster sampling

Adaptive cluster sampling can be a useful design for sampling rare and patchy populations. With this design the initial sample size is fixed but the size of the final sample (and total sampling effort) cannot be predicted prior to sampling. For some populations the final sample size can be quite variable depending on the level of patchiness. Restricted adaptive cluster sampling is a proposed modification where a limit is placed on the sample size prior to sampling and quadrats are selected sequentially for the initial sample size. As a result there is less variation in the final sample size and the total sampling effort can be predicted with some certainty, which is impor- tant for many ecological studies. Estimates of density are biased with the restricted design but under some circumstances the bias can be estimated well by bootstrapping. © Rapid Science 1998     

Behavioural reactivation and subjective assessment of the state of vigilance--application to simulated car driving.

The frequency of some behaviour (such as self-centred gestures) increases during a task that leads to the occurrence of low-vigilance episodes. These gestures can be useful in stimulating oneself. A study carried out in 20 adults has enabled us to state that motor activity (recorded with an actimeter) increases with the duration of a monotonous driving task and sleep deprivation. The analysis of the scores recorded using the Karolinska Sleepiness Scale has shown that drivers can assess the deterioration of their state of vigilance according to the actual sleep preceding the driving test. Finally, the joint analysis of the subjective and objective data revealed a co-variation of these two types of indices. We discuss the stimulatory function of the motor activity in a task leading to the occurrence of low-vigilance episodes by investigating, among other things, the use, conscious or not, of this type of activity.     

The Effect of Protective Gloves on Manual Dexterity in the Cold Environments

This article presents a study on the effect of different protective gloves (which are commercially available and commonly used in the cold) on manual dexterity in cold environments. The experiments compared statistically four different types of gloves and two different types of gloving (outer or double) at +19 °C and -10 °C. Performance was determined both objectively and subjectively using two manual dexterity tasks: bolt-nut and pick-up tasks. The response measured was the time of performing each task. Statistical analysis showed that all independent factors such as glove type, participant, object size, and temperature had significant effects on the hand cooling reaction. A significant difference in the performance between the gloves was found in the bolt-nut task. It was also found that outer-inner combination gloving may be an approach to use for precision tasks.     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

Determination of Heat Loss from the Feet and Insulation of the Footwear

This study compared the methods of determining footwear insulation on human participants and a thermal foot model. Another purpose was to find the minimal number of measurement points on the human foot that is needed for insulation calculation. A bare foot was tested at 3 ambient temperatures on 6 participants. Three types of footwear were tested on 2 participants. The mean insulation for a bare foot obtained on the participant and model were similar. The insulation of warm footwear measured by the 2 methods was also similar. For thin footwear the insulation values from the participants were higher than those from the thermal model. The differences could be related to undefined physiological factors. Two points on the foot can be enough to measure the insulation of footwear on human participants (r = .98). However, due to the big individual differences of humans, and good repeatability and simplicity of thermal foot method, the latter should be preferred for testing.     

A Comparison of Two Methods of Determining Thermal Properties of Footwear

The present European Standard for footwear testing (Standard No. EN 344:1992; European Committee for Standardization [CEN], 1992) classifies footwear thermally by a temperature drop inside the footwear during 30 min at defined conditions. Today, other methods for footwear thermal testing are also available. The aim of this study was to compare EN 344:1992 with a thermal foot method. Six boots were tested according to both methods. Additional tests with modified standard tests were also carried out. The methods ranked the footwear in a similar way. However, the test according to standard EN 344:1992 is a pass-or-fail test, whereas data that is gained from the thermal foot method gives more information and allows further use in research and product development. A change of the present standard method is suggested.     

Validation of Methods for Determination of Metabolic Rate in the Edholm Scale and ISO 8996

The aim of this study was to validate the Edholm scale (Edholm, 1966) and the ISO 8996 standard (International Organization for Standardization [ISO], 1990) by comparing the metabolic rates estimated for both methods with the actual measured metabolic rate (M_Meas) in 6 manual material handling tasks simulated under laboratory conditions. The metabolic rate was calculated from oxygen consumption VO₂ (19 participants) according to Standard No. ISO 8996 (ISO, 1990). Additionally, the participants estimated perceived exertion using the Borg scale. The metabolic rates derived from the Edholm scale (M_Edh) overestimated 5 of 6 activities by 34-50% (α = .05). The metabolic rates derived from ISO 8996 (M_ISO) overestimated all activities by 7-38% (α =.05).