Comparison of organochlorine compound concentrations in colostrum and mature milk

Human breast milk represents the best choice for the nutrition of infants. It is often used for monitoring human exposures to environmental chemicals. Uniquely suited to meet human biological needs, breast milk composition, especially fat content, changes significantly with time from delivery. With the aim to compare the concentration of organochlorine compounds (OCs) in colostrum versus mature milk, we obtained samples of fourth-fifth day postpartum milk (colostrum) and day-14 postpartum milk (mature milk) from 12 women enrolled in the project "Early Childhood Development and PCB Exposure in Slovakia". The concentrations of selected organochlorine pesticides and congeners of polychlorinated biphenyls (PCBs) were measured using gas chromatography with electron capture detection and reported on lipid adjusted basis. No significant differences were found between organochlorine levels in colostrum and those in mature milk samples. A very close correlation was found between the concentrations of organochlorine compounds in colostrum and mature milk (Spearman correlation coefficient r=0.94-0.98 for PCBs, and r=0.85-0.99 for organochlorine pesticides, p<0.001 for all compounds). The present study concludes that the use of colostrum samples provides a close estimate of the child's exposure to OCs in the early neonatal period and demonstrates that, despite the lower fat content, colostrum specimens are adequate to conduct OC analyses.     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

The fate of isoproturon in a freshwater microcosm with Lemna minor as a model organism

Degradation, bioaccumulation and volatile loss of the 14C-labeled phenylurea herbicide isoproturon (IPU) was examined in a freshwater microcosm with the free floating macrophyte species Lemna minor during a 21-day exposure time. Isoproturon volatilisation was very low with 0.13+/-0.01% of the initially applied herbicide. Only a minor amount of the herbicide was completely metabolised, presumably by rhizosphere microorganisms and released as 14CO2. In total, about 9% isoproturon was removed from the aquatic medium during 21 days. The major portion of the pesticide was removed by bioaccumulation of Lemna minor (5.0+/-0.8%) and the bioconcentration factor (BCF) based on freshweight was 15.8+/-0.2. However, this study indicated a high persistence of IPU in freshwater ecosystems and a potential hazard due to bioaccumulation in non-target species. The novel experimental system of this study, developed for easy use and multiple sampling abilities, enabled quantitatively studying the fate of isoproturon and showed high reproducibility with a mean average (14)C-recovery rate of 97.1+/-0.7%.     

Sorption of organic contaminants by biopolymers: role of polarity, structure and domain spatial arrangement

Sorption behavior of hydrophobic organic contaminants (HOCs) (i.e., pyrene, phenanthrene and naphthalene) by native and chemically modified biopolymers (lignin, chitin and cellulose) was examined. Lignins (native and treated) showed nonlinear sorption for all compounds studied, emphasizing their glassy character. Chitins and celluloses had linear isotherms for phenanthrene and naphthalene, illustrating the dominance of partitioning, while pyrene yielded nonlinear isotherms. Sorption capacity (K(oc)) of HOCs was negatively correlated with the polarity [(O+N)/C] of the biopolymers. Aromatic and alkyl+aromatic C percentages, rather than alkyl C content, demonstrated a better correlation with K(oc) values, indicating the importance of aromatic structures for HOC affinity. Hydrophobicity (K(ow))-normalized K(oc) values decreased sharply with increasing percentage of O-alkyl C versus total aliphatic C (O-alkyl C/total aliphatic C) or with polar C/(alkyl+aromatic C) ratio of the biopolymers until their values reached 80% and 4, respectively, illustrating the effect of surrounding polar groups on reducing affinity for HOCs. Overall, the results of this study highlight the role of spatial arrangement of domains within biopolymers in sorption of HOCs, and point to sorbent properties, such as functionality, polarity and structure, jointly regulating the sorption of HOCs in biopolymers.     

Application of microbial hot spots enhances pesticide degradation in soils

Through transfer of an active, isoproturon degrading microbial community, pesticide mineralization could be successfully enhanced in various soils under laboratory and outdoor conditions. The microbes, extracted from a soil having high native ability to mineralize this chemical, were established on expanded clay particles and distributed to various soils in the form of microbial "hot spots". Both, diffusion controlled isoproturon mass flow towards these "hot spots" (6microg d(-1)) as well as microbial ability to mineralize the herbicide (approximately 5microg d(-1)) were identified as the main processes enabling a multiple augmentation of the native isoproturon mineralization even in soils with heavy metal contamination. Soil pH-value appears to exert an important effect on the sustainability of this process.     

Mathematical analysis of the whole core injection method accuracy for measuring phenanthrene biodegradation rates in undisturbed marine sediments

Rates of 14C-phenanthrene mineralization in contaminated, undisturbed marine sediments were measured using the whole core injection method to assess microbial natural attenuation activity as a function of sediment depth. Submerged sediments were sampled from Eagle Harbor, a marine superfund site in Puget Sound. Experiments show significant biodegradation activities (0.0012-0.0036 day(-1)) in the sediment horizons from 0 to 10 cm. The purpose and scope of this paper is to evaluate the range of experimental conditions giving valid results; a mathematical simulation described competing contaminant 14C-phenanthrene diffusion and simultaneous biodegradation (Monod kinetics), both retarded by sorption. The effect of aging was examined with two sorption models in presumed pseudo-homogenous sediments having effective properties. The simulation predictions provide quantitative guidelines for the successful use of the whole core injection method. (1) The effective Monod constant KS' in sediment is increased by a large partition coefficient KP between sediment and water and makes the apparent 14C-phenanthrene biodegradation approach first-order kinetics. (2) When KS'>1 mg(-1) l(-1), the measured 14C-phenanthrene biodegradation extent is biased by inadequately distributed injected tracer only when less than 7% of the sediment horizon is initially probed and mixed with injected tracer. (3) A short incubation time (<20 days) is necessary when a mobile indicator, e.g., gaseous 14CO2, is used. For longer incubation times, predictions show that a 14CO2 indicator diffuses to adjacent horizons, thus smearing the depth profile of biodegradation. (4) This method employing a radiolabeled tracer provides accurate biodegradation rates for freshly contaminated sediments, and represents an upper limit to the natural phenanthrene biodegradation extents if the contaminant is aged over 50 days.     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

Reductive hydrogenation of polycyclic aromatic hydrocarbons catalyzed by metalloporphyrins

The hydrogenation of polycyclic aromatic hydrocarbons (PAHs) (naphthalene, anthracene, and phenanthrene) catalyzed by metalloporphyrins based on cobalt, nickel or iron was studied in aqueous solutions at room temperature and ambient pressure. Nickel porphyrin (P1) activated by nanosized zero-valent iron (nano-ZVI) and cobalt porphyrins (P2) and (P4) activated by titanium(III) citrate as the electron donor were demonstrated to be promising catalysts for the reductive hydrogenation of PAHs. In particular, partially saturated di-, tetra-, and octahydrogenated products were obtained for anthracene or phenanthrene using a nickel porphyrin activated by nano-ZVI, while naphthalene was transformed to tetralin. Systems containing cobalt porphyrins activated by titanium(III) citrate exhibited a high selectivity and activity toward hydrogenation of anthracene, producing 9,10-dihydroanthracene. However, no formation of hydrogenated hydrocarbons was observed from naphthalene or phenanthrene using cobalt porphyrins.     

Structure of Mn-Zr mixed oxides catalysts and their catalytic performance in the gas-phase oxidation of chlorocarbons

The catalytic activity and selectivity of manganese zirconia mixed oxides were evaluated for the oxidation of two common chlorinated pollutants found in waste streams, namely 1,2-dichloroethane (DCE) and trichloroethylene (TCE). Mixed oxides with varying Mn-Zr content were prepared by coprecipitation via nitrates, and subsequent calcination at 600 degrees C for 4 h in air. These catalysts were characterised by means of several techniques such as atomic emission spectrometry, N2 adsorption-desorption, powder X-ray diffraction, temperature-programmed desorption of ammonia, pyridine adsorption followed by diffuse reflectance infrared spectroscopy and temperature-programmed reduction with hydrogen. The active catalytic behaviour of Mn-Zr mixed oxides was ascribed to a substantial surface acidity combined with readily accessible active oxygen species. Hence, the mixed oxide with 40 mol% manganese content was found to be an optimum catalyst for the combustion of both chlorocarbons with a T50 value around 305 and 315 degrees C for DCE and TCE oxidation, respectively. The major oxidation products were carbon dioxide, hydrogen chloride and chlorine. It was observed that the formation of both CO2 and Cl2 was promoted with Mn loading.