US exposure to multiple landscape stressors and climate change

Regional Environmental Change - We examined landscape exposure to wildfire potential, insects and disease risk, and urban and exurban development for the conterminous US (CONUS). Our analysis...     

Ecological literacy and beyond: Problem-based learning for future professionals

Ecological science contributes to solving a broad range of environmental problems. However, lack of ecological literacy in practice often limits application of this knowledge. In this paper, we highlight a critical but often overlooked demand on ecological literacy: to enable professionals of various careers to apply scientific knowledge when faced with environmental problems. Current university courses on ecology often fail to persuade students that ecological science provides important tools for environmental problem solving. We propose problem-based learning to improve the understanding of ecological science and its usefulness for real-world environmental issues that professionals in careers as diverse as engineering, public health, architecture, social sciences, or management will address. Courses should set clear learning objectives for cognitive skills they expect students to acquire. Thus, professionals in different fields will be enabled to improve environmental decision-making processes and to participate effectively in multidisciplinary work groups charged with tackling environmental issues.     

A Systematic Approach to the Evaluation of RCRA Disposal Facilities Under Future Climate‐Induced Events

The ability of near‐surface disposal facility cover designs to meet percolation performance criteria can be influenced by naturally occurring climatic mechanisms as well as anthropogenic forcing. This study was conducted to determine the effect of climate‐induced events on percolation based, probabilistic distributions derived from historical climate data. Water balance predictions were evaluated using the HELP model, employing several variations of degradation in a traditional RCRA disposal facility cover design over a 100‐year simulation period. Results demonstrated that changes in precipitation and temperature can influence performance. The analysis also revealed that when both precipitation and temperature are increased, warmer temperatures tend to offset some of the impact from greater precipitation. ©2015 Wiley Periodicals, Inc.     

Optimal Treatment Zone Moves During Enhanced Reductive Dechlorination in Fractured Bedrock

An enhanced bioremediation pilot test was implemented to study the efficacy of enhancing in situ reductive dechlorination of tetrachloroethene (PCE) in shallow bedrock where some intrinsic degradation to cis‐1,2‐dichloroethene (cis‐1,2‐DCE) was observed without further degradation to vinyl chloride or nontoxic ethene. Limited Dehalococcoides spp. cell concentrations were present within the study area prior to the gravity‐fed injection of an injectate of fermentable carbon substrates in native anaerobic groundwater. Direct connectivity between the injection well screen and performance monitoring well was evidenced and resulted in the degradation of nearly all PCE to cis‐1,2‐DCE, significant decrease in pH, and apparent inhibited Dehalococcoides spp. growth in the study area groundwater in the first six months. After 24 months, nearly all cis‐1,2‐DCE had degraded to nontoxic ethene, pH rebounded to more optimal levels, and abundant growth of Dehalococcoides spp. (6.8E05 cells/mL) and its functional gene expressions responsible for complete dechlorination were evident. The observations indicated initial poor dechlorination within the injection zone did not preclude effective treatment, allowing sufficient monitoring time showed the effective treatment zone (or more‐optimal fringe) first moved outward from the injection zone beyond the monitoring point and then receded back toward the point of injection over a period of two years. ©2015 Wiley Periodicals, Inc.     

崇明东滩湿地沉积物重金属污染的磁诊断

对取自崇明东滩的高潮滩、中潮滩和低潮滩的沉积物柱样进行了磁学、粒度、重金属含量等指标的分析、比较与综合研究. 结果表明:在以粉砂为主的崇明东滩,通过污染负荷指数法进行评价,除低潮滩无污染外,中潮滩和高潮滩均有中度的重金属污染. 选取中度重金属污染的高潮滩沉积物柱样进行粒度、重金属含量以及磁性参数的相关性分析显示,χ_fd,χ_ARM/SIRM与重金属含量和粘土(粒径<4 μm)之间有较高的相关性,并以此建立了磁诊断线性回归模型;χ_fd和χ_ARM/SIRM可作为重金属含量的替代指标.      

Do DBPs swim in salt water pools? Comparison of 60 DBPs formed by electrochemically generated chlorine vs. conventional chlorine

Disinfectants are added to swimming pools to kill harmful pathogens. Although liquid chlorine(sodium hypochlorite) is the most commonly used disinfectant, alternative disinfection techniques like electrochemically generated mixed oxidants or electrochemically generated chlorine, often referred to as salt water pools, are growing in popularity. However, these disinfectants react with natural organic matter and anthropogenic contaminants introduced to the pool water by swimmers to form disinfectio...     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

Capacity assessment to secure COVID-19 waste treatment in Vietnam

Journal of Material Cycles and Waste Management - The accelerated generation of COVID-19 waste under the Delta-fuelled outbreak placed a sudden burden on waste disposal in Vietnam. To secure the...     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Removal of fluoride from water using aluminum-modified activated carbon prepared from khat (Catha edulis) stems

This study investigated the fluoride removal efficiency and adsorption of a low-cost adsorbent prepared using aluminum-modified activated carbon from khat (Catha edulis) in a batch-mode reactor. The operating factors, including pH, adsorbent dose, and fluoride initial concentration, were optimized using the Box Behnken design of response surface methodology. The correlation coefficient (R²) for the removal of fluoride was found to be 0.93, showing the validity of the developed quadratic model. The results showed that, under optimized conditions of an adsorbent dose of 2.47 g/L, an initial fluoride concentration of 2.1 mg/L, an initial pH 6.08, and 60 min, 90% fluoride reduction was achieved. Meanwhile, the adsorption isotherm and kinetics followed the Langmuir adsorption model and the Pseudo second model, respectively, with a monolayer adsorption capacity of 0.3065 mg/g. On the other hand, Fourier transform infrared spectroscopy and scanning electron microscopy analyses revealed the formation of major peaks of components such as hydroxyl and carboxylic acids. The same optimum treatment conditions (adsorbent dose of 2.47 g/L, initial pH 6.08, and treatment time of 60 min) managed to remove low initial fluoride concentrations of 3.67 and 4.33 mg/L from real groundwater by 72.84% and 70.37%, respectively. The modified adsorbent prepared in this study successfully treat the low fluoride concentration to a level recommended by WHO for drinking water.