Mean Vehicle Speed Distributions for the Spatiotemporal Estimation of Exhaust Emissions

Link Emissions Models estimate traffic-related air pollution emissions at the individual road link level and inform governmental policies for air quality management. The current South Australian Link Emissions Model (CLEM) assumes constant spatiotemporal traffic flow at a single fixed mean speed, a potential limitation as the variability of exhaust emissions with vehicle speed has been established in the literature.We extend CLEM to eliminate the assumption of constant traffic flow, through the derivation of mean Australian vehicle speed distributions for different road types. Specifically, we successfully model the vehicle speed profile data from the second National In-Service Emissions study using Nearest Neighbour Kernel Density Estimation. We propose a mean speed Distribution Link Emissions Model (DLEM) for exhaust emission estimation based on the derived mean speed distributions. DLEM is an augmented, enhanced version of CLEM, accommodating a range of vehicle speeds and road types. The performance of the extended model, DLEM, is analysed in comparison to the current model, CLEM, through a case study analysis of vehicle exhaust emissions on a typical arterial road in Adelaide, South Australia. Results indicate use of DLEM and, by extension, mean vehicle speed distributions, has a strong impact on emission estimation. In particular, the fixed speed model, CLEM, may be substantially underestimating exhaust emissions of carbon monoxide, non-methane volatile organic compounds and particulate matter less than 2.5 μm in diameter. These are common exhaust pollutants that have been extensively linked with adverse health effects including respiratory morbidity and premature mortality.     

Estimated crop yield losses due to surface ozone exposure and economic damage in India

In this study, we estimate yield losses and economic damage of two major crops (winter wheat and rabi rice) due to surface ozone (O₃) exposure using hourly O₃ concentrations for the period 2002–2007 in India. This study estimates crop yield losses according to two indices of O₃ exposure: 7-h seasonal daytime (0900–1600 hours) mean measured O₃ concentration (M7) and AOT40 (accumulation exposure of O₃ concentration over a threshold of 40 parts per billion by volume during daylight hours (0700–1800 hours), established by field studies. Our results indicate that relative yield loss from 5 to 11 % (6–30 %) for winter wheat and 3–6 % (9–16 %) for rabi rice using M7 (AOT40) index of the mean total winter wheat 81 million metric tons (Mt) and rabi rice 12 Mt production per year for the period 2002–2007. The estimated mean crop production loss (CPL) for winter wheat are from 9 to 29 Mt, account for economic cost loss was from 1,222 to 4,091 million US$ annually. Similarly, the mean CPL for rabi rice are from 0.64 to 2.1 Mt, worth 86–276 million US$. Our calculated winter wheat and rabi rice losses agree well with previous results, providing the further evidence that large crop yield losses occurring in India due to current O₃ concentration and further elevated O₃ concentration in future may pose threat to food security.     

The effect of aerosol optical depth on rainfall with reference to meteorology over metro cities in India

Rainfall is a key link in the global water cycle and a proxy for changing climate; therefore, proper assessment of the urban environment’s impact on rainfall will be increasingly important in ongoing climate diagnostics and prediction. Aerosol optical depth (AOD) measurements on the monsoon seasons of the years 2008 to 2010 were made over four metro regional hotspots in India. The highest average of AOD was in the months of June and July for the four cities during 3 years and lowest was in September. Comparing the four regions, Kolkata was in the peak of aerosol contamination and Chennai was in least. Pearson correlation was made between AOD with climatic parameters. Some changes in the parameters were found during drought year. Temperature, cloud parameters, and humidity play an important role for the drought conditions. The role of aerosols, meteorological parameters, and their impacts towards the precipitation during the monsoon was studied.     

A new bioseed for determination of wastewater biodegradability: analysis of the experimental procedure

A new bioassay proposed in the patent P201300029 was applied to a pre-treated wastewater containing a mixture of commercial pesticides to simulate a recalcitrant industrial wastewater in order to determine its biodegradability. The test uses a mixture of standardized inoculum of the lyophilized bacteria Pseudomonas putida with the proper proportion of salts and minerals. The results highlight that biodegradation efficiency can be calculated using a gross parameter (chemical oxygen demand (COD)) which facilitates the biodegradability determination for routine water biodegradability analysis. The same trend was observed throughout the assay with the dehydrated and fresh inoculums, and only a difference of 5 % in biodegradation efficiency (E _f) was observed. The obtained results showed that the P. putida biodegradability assay can be used as a commercial test with a lyophilized inoculum in order to monitor the ready biodegradability of an organic pollutant or a WWTP influent. Moreover, a combination of the BOD₅/COD ratio and the P. putida biodegradability test is an attractive alternative in order to evaluate the biodegradability enhancement in water pre-treated with advanced oxidation processes (AOPs).     

Distribution of PAHs and trace metals in urban stormwater sediments: combination of density fractionation,mineralogy and microanalysis

Sediment management from stormwater infiltration basins represents a real environmental and economic issue for stakeholders due to the pollution load and important tonnages of these by-products. To reduce the sediment volumes to treat, organic and metal micropollutant-bearing phases should be identified. A combination of density fractionation procedure and microanalysis techniques was used to evaluate the distribution of polycyclic aromatic hydrocarbons (PAHs) and trace metals (Cd, Cr, Cu, Ni, Pb, and Zn) within variable density fractions for three urban stormwater basin sediments. The results confirm that PAHs are found in the lightest fractions (d?d??3) whereas trace metals are equally distributed within the light, intermediary, and highest fractions (d?d?d?d?>?2.8 g cm^?3) and are mostly in the 2.3?d??3 fraction. The characterization of the five fractions by global analyses and microanalysis techniques (XRD and MEB-EDX) allowed us to identify pollutant-bearing phases. PAHs are bound to the organic matter (OM) and trace metals to OM, clays, carbonates and dense particles. Moreover, the microanalysis study underlines that OM is the main constituent responsible for the aggregation, particularly for microaggregation. In terms of sediment management, it was shown that density fractionation is not suitable for trace metals but could be adapted to separate PAH-enriched phases.     

Total and Methylmercury in Soft Tissues of White-Tailed Eagle (Haliaeetus albicilla) and Osprey (Pandion haliaetus) Collected in Poland

Mercury (Hg) contamination in piscivorous birds, especially methylmercury (MeHg), has been drawing much attention worldwide in regard to its bioaccumulation and biomagnification in food chains. In this study on Hg in the soft tissues of white-tailed eagles (n = 22) and ospreys (n = 2) from Poland, total Hg (THg) range was 0.15–47.6 while MeHg range was 0.11–8.05 mg kg⁻¹ dry weight. In both species, median THg and MeHg concentrations were lower in the muscle and brain than in the liver and kidney. Median nephric residues were just under 3 and 5 mgTHg kg⁻¹ or 0.9 and 3.7 mgMeHg kg⁻¹ for white-tailed eagle and osprey, respectively. In Norwegian data from the 1970s and in our results, MeHg in the muscle of white-tailed eagle was ~60 % THg (%MeHg = MeHg/THg × 100), lower than in other piscivorous birds. A clear similarity in THg tissue levels was found between Polish and German populations of white-tailed eagles.     

Developmental toxicity of PAH mixtures in fish early life stages. Part II: adverse effects in Japanese medaka

In aquatic environments, polycyclic aromatic hydrocarbons (PAHs) mostly occur as complex mixtures, for which risk assessment remains problematic. To better understand the effects of PAH mixture toxicity on fish early life stages, this study compared the developmental toxicity of three PAH complex mixtures. These mixtures were extracted from a PAH-contaminated sediment (Seine estuary, France) and two oils (Arabian Light and Erika). For each fraction, artificial sediment was spiked at three different environmental concentrations roughly equivalent to 0.5, 4, and 10 μg total PAH g^?1 dw. Japanese medaka embryos were incubated on these PAH-spiked sediments throughout their development, right up until hatching. Several endpoints were recorded at different developmental stages, including acute endpoints, morphological abnormalities, larvae locomotion, and genotoxicity (comet and micronucleus assays). The three PAH fractions delayed hatching, induced developmental abnormalities, disrupted larvae swimming activity, and damaged DNA at environmental concentrations. Differences in toxicity levels, likely related to differences in PAH proportions, were highlighted between fractions. The Arabian Light and Erika petrogenic fractions, containing a high proportion of alkylated PAHs and low molecular weight PAHs, were more toxic to Japanese medaka early life stages than the pyrolytic fraction. This was not supported by the toxic equivalency approach, which appeared unsuitable for assessing the toxicity of the three PAH fractions to fish early life stages. This study highlights the potential risks posed by environmental mixtures of alkylated and low molecular weight PAHs to early stages of fish development.