Carbonization of waste PVC to develop porous carbon material without further activation

Efficient removal of chlorine from PVC achieved by two-stage heat-treatment (280 and 410 degrees C) provided chlorine-free isotropic pitch containing additive. The pitch was stabilized and carbonized into porous carbons with surface areas of approximately 300 m2/g. Resultant porous carbons showed three pore structures of supermicropore, micropore and mesopore. The generation of CO2 from the decomposition of the CaCO3 additive in waste PVC is responsible for the development of porous structures. The surface area of the carbonized product increased after the removal of CaO.     

The effect of sodium chloride on the dissolution of calcium silicate hydrate gels

The use of cement based materials will be widespread in the long-term management of radioactive materials in the United Kingdom. One of the applications could be the Nirex reference vault backfill (NRVB) as an engineered barrier within a deep geological repository. NRVB confers alkaline conditions, which would provide a robust chemical barrier through the control of the solubility of some key radionuclides, enhanced sorption and minimised corrosion of steel containers. An understanding of the dissolution of C-S-H gels in cement under the appropriate conditions (e.g., saline groundwaters) is necessary to demonstrate the expected evolution of the chemistry over time and to provide sufficient cement to buffer the porewater conditions for the required time. A programme of experimental work has been undertaken to investigate C-S-H gel dissolution behaviour in sodium chloride solutions and the effect of calcium/silicon ratio (C/S), temperature and cation type on this behaviour. Reductions in calcium concentration and pH values were observed with samples equilibrated at 45 degrees C compared to those prepared at 25 degrees C. The effect of salt cation type on salt-concentration dependence of the dissolution of C-S-H gels was investigated by the addition of lithium or potassium chloride in place of sodium chloride for gels with a C/S of 1.0 and 1.8. With a C/S of 1.0, similar increases in dissolved calcium concentration with increasing ionic strength were recorded for the different salts. However, at a C/S of 1.8, anomalously high calcium concentrations were observed in the presence of lithium.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.     

Incentive-Based Conservation Programs in Developing Countries: A Review of Some Key Issues and Suggestions for Improvements

Biodiversity conservation in developing countries has been a challenge because of the combination of rising human populations, rapid technological advances, severe social hardships, and extreme poverty. To address the social, economic, and ecological limitations of people-free parks and reserves, incentives have been incorporated into conservation programs in the hopes of making conservation meaningful to local people. However, such incentive-based programs have been implemented with little consideration for their ability to fulfill promises of greater protection of biodiversity. Evaluations of incentive-based conservation programs indicate that the approach continually falls short of the rhetoric. This article provides an overview of the problems associated with incentive-based conservation approaches in developing countries. It argues that existing incentive-based programs (IBPs) have yet to realize that benefits vary greatly at different “community” scales and that a holistic conceptualization of a community is essential to incorporate the complexities of a heterogeneous community when designing and implementing the IBPs. The spatial complexities involved in correctly identifying the beneficiaries in a community and the short-term focus of IBPs are two major challenges for sustaining conservation efforts. The article suggests improvements in three key areas: accurate identification of “target” beneficiaries, greater inclusion of marginal communities, and efforts to enhance community aptitudes.     

Effect of Cadmium on Microbial Activity and a Ryegrass Crop in Two Semiarid Soils

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5%; 10%;, and 50%; inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.     

Mapping ground water vulnerability to pesticide leaching with a process-based metamodel of EuroPEARL

To support EU policy, indicators of pesticide leaching at the European level are required. For this reason, a metamodel of the spatially distributed European pesticide leaching model EuroPEARL was developed. EuroPEARL considers transient flow and solute transport and assumes Freundlich adsorption, first-order degradation and passive plant uptake of pesticides. Physical parameters are depth dependent while (bio)-chemical parameters are depth, temperature, and moisture dependent. The metamodel is based on an analytical expression that describes the mass fraction of pesticide leached. The metamodel ignores vertical parameter variations and assumes steady flow. The calibration dataset was generated with EuroPEARL and consisted of approximately 60,000 simulations done for 56 pesticides with different half-lives and partitioning coefficients. The target variable was the 80th percentile of the annual average leaching concentration at 1-m depth from a time series of 20 yr. The metamodel explains over 90% of the variation of the original model with only four independent spatial attributes. These parameters are available in European soil and climate databases, so that the calibrated metamodel could be applied to generate maps of the predicted leaching concentration in the European Union. Maps generated with the metamodel showed a good similarity with the maps obtained with EuroPEARL, which was confirmed by means of quantitative performance indicators.     

Forest carbon management in the United States: 1600-2100

This paper reviews the effects of past forest management on carbon stocks in the United States, and the challenges for managing forest carbon resources in the 21st century. Forests in the United States were in approximate carbon balance with the atmosphere from 1600-1800. Utilization and land clearing caused a large pulse of forest carbon emissions during the 19th century, followed by regrowth and net forest carbon sequestration in the 20th century. Recent data and knowledge of the general behavior of forests after disturbance suggest that the rate of forest carbon sequestration is declining. A goal of an additional 100 to 200 Tg C/yr of forest carbon sequestration is achievable, but would require investment in inventory and monitoring, development of technology and practices, and assistance for land managers.     

Behavior of an aerated submerged fixed-film reactor (ASFFR) under simultaneous organic and ammonium loading

The performance of an aerated submerged fixed-film reactor (ASFFR) under simultaneous organic and ammonium loading and its effect on nitrification was studied. Organic loadings varied in the range of 1.93 to 5.29 g chemical oxygen demand (COD) m-2 d-1 and NH4-N loadings were in the range of 116 to 318 mg NH4-N m-2 d-1. Increments of loading rates were obtained both by increasing the flow rate and increasing the influent substrate in individual pilot runs. Results showed that with organic loading rates up to 3.97 g COD m-2 d-1, complete nitrification was achievable. Although high organic loading such as 5.29 g COD m-2 d-1 could cause nitrification to stop, shifting to lower organic loadings made nitrification start and set rapidly to its previous steady-state concentrations. Comparison of results showed that in the ASFFR, nitrification would be severely affected by an organic loading rate of 5.29 g COD m-2 d-1 by increasing either the flow or the influent substrate. It should be noted that the average value of dissolved oxygen was 3.4 mg L-1 with an air supply of 15 L min-1, and there was no indication of oxygen limitation. The results of this study show the flexibility of ASFFRs under changing organic loads. Furthermore, for achieving complete nitrification and optimum application of these reactors for protecting receiving water from the environmental hazards of ammonium, the maximum organic loading that would present complete nitrification should be considered.     

Transaction costs and community-based natural resource management in Nepal

Transaction costs in community-based resource management are incurred by households attempting to enforce property right rules over common resources similar to those inherent in private property rights. Despite their importance, transaction costs of community-based management of common pool resources (CPRs) are often not incorporated into the economic analysis of participatory resource management. This paper examines the transaction costs incurred by forest users in community forestry (CF) based on a survey of 309 households belonging to eight different forest user groups (FUGs) in the mid hills of Nepal. The analysis reveals that the average 'poor' household incurred Nepalese rupees (NRS) 1265 in transaction costs annually, while wealthier 'rich' households incurred an average of NRS 2312 per year. Although richer households bear higher proportions of such costs, transaction costs for CF management as a percentage of resource appropriation costs are higher for poorer households (26%) than those of middle-wealth (24%) or rich households (14%). There are also village differences in the level of transaction costs. The results show that transaction costs are a major component of resource management costs and vary according to socio-economic status of resource users and characteristics of the community.     

Survivor needs or logistical convenience? Factors shaping decisions to deliver relief to earthquake‐affected communities,Pakistan 2005–06

In Bureaucratizing the Good Samaritan , Waters (2001) argues that bureaucratic rationality distracts humanitarian agencies from the needs of the people they are supposed to assist, in favour of other values that their institutional frameworks dictate. We test his claim by investigating the response to the Pakistan 2005 earthquake. One of us (Dittemore) worked with the United Nations Joint Logistics Centre in the theatre, managing a relief cargo shipment database. The response, known as 'Operation Winter Race', was hampered by extreme logistical challenges, but ultimately succeeded in averting a second disaster resulting from cold and starvation. We use statistical models to probe whether survivor needs significantly guided decisions to deliver relief to affected communities. Needs assessments remained incomplete and incoherent. We measure needs through proxy indicators and integrate them, on a Geographic Information System (GIS) platform, with logistics and relief delivery data. We find that, despite strong logistics effects, needs orientations were significant. However, the strength of decision factors varies between commodity types (food versus clothing and shelter versus reconstruction materials) as well as over the different phases of the response. This study confirms Thomas's observation that logistics databases are rich 'repositories of data that can be analyzed to provide post-event learning' (Thomas, 2003, p. 4). This article is an invitation for others to engage in creative humanitarian data management.