北京森林土壤富里酸亚组分的表征及荧光指标分析

为探究土壤FA（富里酸）的结构组成及其腐殖化和芳香性特征,采用SFS（同步荧光光谱）技术结合FRI（荧光区域积分）、DSFS（导数荧光光谱）及PCA（主成分分析）对土壤FA亚组分的荧光光谱特征及荧光指标间的相关性进行了分析.利用XAD-8吸附树脂结合初始pH为3、5、7、9和13的Na₄P₂O₇（焦磷酸钠）缓冲溶液逐步洗脱技术将土壤FA分别分级得5种亚组分（FA₃、FA₅、FA₇、FA₉和FA₁₃）.结果表明:①FA₃-FA₁₃的SFS体现3类荧光峰,分别代表类蛋白、类富里酸和类腐殖酸物质.FA₃和FA₅含有含量相近的类蛋白、类富里酸和类腐殖酸物质,而FA₇-FA₁₃含有的主要成分是类蛋白物质;同时,FA₇-FA₁₃的类富里酸和类腐殖酸较FA₃和FA₅更为复杂,且FA₇-FA₁₃含有更多易降解的单环芳香族化合物.②FA₃和FA₅的类酪氨酸和类色氨酸物质被识别,且FA₇-FA₁₃的类色氨酸含量明显大于类富里酸和类腐殖酸含量.③FA₃-FA₁₃光谱荧光强度指标（I₂₄₀/I₃₄₀、I₂₄₀/I₄₅₀、I₃₄₀/I₂₇₀、I₄₅₀/I₂₇₀和I₄₅₀/I₃₄₀）的对比分析表明,FA₃和FA₅的腐殖化程度和芳香性均大于FA₇-FA₁₃.④荧光指标A_FLR/A、A_HLR/A、S_270-340、S_270-450、A₂/A₁和A₃/A₁可作为指示亚组分芳香性的优化指标,且A_HLR/A、A₂/A₁和A₃/A₁可作为最佳指标反映亚组分的腐殖化程度.研究显示,土壤FA亚组分的结构表征及荧光指标分析为后续FA亚组分与环境污染物相互机理研究提供依据,为探究有机质的结构特性和环境行为提供理论支撑.      

宜昌市天福庙水库沉积物磷形态分布特征及其释放通量估算

为揭示天福庙水库沉积物中磷的形态及空间分布特征,探讨沉积物-水界面磷的释放通量及其主要影响因素,在天福庙水库库区内设立了6个采样点,采用SMT（磷形态标准测试程序）法测量其沉积物中磷的形态组成,对沉积物磷空间分布、间隙水及上覆水PO₄3-质量浓度变化特征进行了分析,估算了磷释放通量.结果表明:①库区沉积物中TP主要由Ca-P（钙磷）构成,TP在水库库尾和支流入库处具有较高的质量分数,分别为4 904.6、5 015.2 mg/kg.TP、IP（无机磷）、Ca-P时空动态具有一致性,磷矿石灰污染是重要原因.②孔隙水中PO₄3-质量浓度在沉积物表层1~3 cm内存在很高的峰值,达11.3 mg/L,各采样点均高于上覆水中PO₄3-质量浓度,存在向上覆水释放PO₄3-的风险,孔隙水中PO₄3-质量浓度与TP质量分数及磷形态相关.③采用孔隙水扩散模型法估算PO₄3-在沉积物-上覆水界面上的释放通量,库区沉积物磷释放通量范围为0.13~3.08 mg/（m2·d）,平均值为1.03 mg/（m2·d）,处于较高水平.研究显示,磷矿开采是干流沉积物磷来源和形态组成的重要原因,库区磷释放通量与水流扰动密切相关,坝前、支流交汇处、库尾是库区内源磷污染的主要区域.      

青藏高原西北部近地表气温直减率时空分布特征

近地表气温直减率是研究山地生态系统对气候变化响应过程中的重要参数,论文基于青藏高原西北部1951—2013年的9个标准气象站以及2012—2016年的高山自设观测站的日平均气温、最低气温、最高气温（T_ave、T_min、T_max）数据,分析了青藏高原西北部近地表气温直减率（LR_Tave、LR_Tmin、LR_Tmax）的时空分布特征。结果表明：1）青藏高原西北部近地表气温随高程增大有显著下降趋势。研究区两个区域的LR_Tave、LR_Tmin、LR_Tmax均呈现出显著的空间差异性,而基于气象站的LR_Tave、LR_Tmin高于高山观测站的LR_Tave、LR_Tmin、LR_Tmax,其中LR_Tmin差异最为显著,而LR_Tmax空间差异较小。2）青藏高原西北部近地表气温直减率具有明显的季节差异,气象站的LR_Tave、LR_Tmin、LR_Tmax季节变化趋势为春季高、夏季较高、冬季低,而高山观测站的LR_Tave、LR_Tmin、LR_Tmax季节变化趋势为夏季高、冬季低。其中气象站LR_Tmax在四季中的差异最显著,而高山观测站的LR_Tmin的季节差异最大。高山观测站的气温直减率在4—9月间具有较为稳定的值。3）青藏高原西北部LR_Tave、LR_Tmin在气温突变年前后具有显著的差异,LR_Tmax无显著的变化。其中,在气温突变年之后,LR_Tave、LR_Tmin有显著的上升趋势,表明青藏高原西北部地区的LR_Tave、LR_Tmin对区域气候变化的响应显著,而LR_Tmax对区域气候变化的响应不显著。研究将有效改善青藏高原西北部气温空间分布规律研究的不足,为区域气候变化研究及生态系统对气候响应等定量研究提供理论基础。     

农业生产效率对农业用水量的影响

2016年中国农业用水量占用水总量的60%以上,水资源成为国家农业安全的重要保障,而影响农业用水量的因素较多。论文首先采用非期望产出的Super-SBM模型测度1998—2015年中国30个省份（西藏、香港、澳门、台湾缺少资料,未计算）的农业生产效率,再利用非参数核密度估计演示主要年份农业生产效率和农业用水量的动态变化,然后借鉴Hansen的门槛模型检验农业生产效率对农业用水量的“门槛效应”。结果表明：1）我国农业生产效率呈倒“U”型走势,省际间差异性减弱;农业用水量先下降后上升,省际间差距存在扩大的趋势。2）提高农业生产效率是降低农业用水量的有效途径,农业生产效率对农业用水量存在显著的“门槛抑制效应”,抑制强度呈“N”型走势。3）扩大粮食作物种植比例、增加农村劳动力和提高农村居民收入均能有效抑制农业用水量增加,而水资源禀赋、水利投资和耕地灌溉面积与农业用水量呈正相关性,农民受教育水平回归结果不显著。     

信息干预是否影响食物浪费?——基于餐饮业随机干预试验

食物浪费既造成了严重的资源环境压力,也威胁着粮食安全,更导致了全球居民的福利损失。食物浪费是消费者行为选择的结果,且消费者的行为在很大程度上是受描述性规范影响的,那么消费者对干预信息的吸取（描述性规范）是否会影响消费者的食物浪费行为有待进行研究。因此,论文运用随机干预试验的方法,探讨不同干预方案对消费者在外就餐食物浪费行为的影响。结果表明：消费者在信息干预过程中存在对干预信息接收度的问题,当我们试图去干预消费者时,被干预的消费者有多达41.38%的消费者没有注意到干预信息;在餐馆有相关信息提示的就餐环境下,信息干预对消费者的食物浪费行为是有效用的,具体表现为消费者的食物浪费行为因干预信息内容的不同而不同。     

黄土高原草地土壤水分和物种多样性沿降水梯度的分布格局

研究土壤水分、生物多样性的空间变异性是认识陆地生态系统对降水变化的响应特征及适应机制的有效途径。论文利用黄土高原自东南向西北的天然降水梯度,采用样带研究方法对47个草地0~3 m土壤水分和物种多样性进行测定,系统分析了草地土壤水分和植物物种多样性在降水梯度上（250~550 mm）的空间分异及二者之间的权衡关系。结果表明：降水自东南向西北递减是控制黄土高原草地0~3 m土壤水分和物种多样性空间异质性的关键因素。随降雨减少,土壤水分呈线性递减趋势,其中浅层土壤水分（0~1 m）与年降水量相关系数最大。物种丰富度指数和物种多样性指数随降水减少呈显著的线性递减趋势,物种均匀度指数在降水梯度上没有明显变化。370 mm年均降水量是物种多样性和土壤水分权衡关系的转折点,转折点以上二者存在协同关系,即土壤水分和物种多样性沿降水梯度以相同速率变化。370 mm年均降水量以下,物种多样性和土壤水分的权衡增大,意味着维持物种多样性以消耗土壤水分为代价。     

Are current Chinese national ambient air quality standards on 24-hour averages for particulate matter sufficient to protect public health?

With rapid economic development and urbanization in recent decades, China has experienced the worsening of ambient air quality. For better air quality management to protect human health, Chinese government revised national ambient air quality standards(NAAQS) for particulate matter(PM) in 2012(GB3095-2012). To assess the effectiveness of current NAAQS for PM on public health in Chinese population, we conducted a metaanalysis on published studies examining the mortality risk of short-term exposure to PM with aerodynamic diameters less than 10 and 2.5 μm(PM_(10) and PM_(2.5)) in China. The reported24-hour concentrations of PM_(10) and PM_(2.5) in studies ranged from 43.5 to 150.1 μg/m~3 and 37.5 to 176.7 μg/m~3. In the pooled excess, mortality risk estimates of short-term exposure to PM.In specific, per 10 μg/m~3 increase in PM_(10), we observed increases of 0.40%(95%CI: 0.33%,0.47%), 0.57%(95%CI: 0.44%, 0.70%) and 0.49%(95%CI: 0.40%, 0.58%) in total, respiratory and cardiovascular mortality, per 10 μg/m~3 increase in PM_(2.5), we observed increases of 0.51%(95%CI: 0.38%, 0.63%), 0.62%(95%CI: 0.52%, 0.73%) and 0.75%(95%CI: 0.54%, 0.95%) in total,respiratory and cardiovascular mortality. Finally, we derived 125 μg/m~3 for PM_(10) and 62.5 μg/m~3 for PM_(2.5) as 24-hour recommendation values based on the pooled estimates. Our results indicated that current Chinese NAAQS for PM could be sufficient in mitigating the excess mortality risk from short-term exposure to ambient PM. However, future research on longterm exposure cohort studies in Chinese population is also essential in revising annual averages for PM in Chinese NAAQS.     

Soot reduction by addition of dimethyl carbonate in normal and inverse ethylene diffusion flames: Nanostructural evidence

Oxygenated fuel represents an attractive alternative as an additive for reducing soot emissions.Dimethyl carbonate(DMC) is an oxygenated compound which is a good option to reduce soot,but the detailed characteristics of soot produced from combustion of hydrocarbon fuels blended with DMC are still lacking. The present research studied the nanostructure and reactivity of soot particles in ethylene/DMC normal and inverse diffusion flames. High resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), and thermogravimetric analysis(TGA)were used to analyze the nanostructure and reactivity of soot. It was found that DMC addition was effective in decreasing the average weights of soot formed in flames. The results of HRTEM images showed that soot particles obtained with DMC addition showed liquid-like material and tight bonding, and exhibited more highly disorganized layers, which give it higher reactivity than soot obtained without DMC addition. Furthermore, HRTEM was used to analyze soot fringe characteristics consisting of fringe tortuosity, fringe length, and fringe separation. XRD was used to crosscheck the results for fringe separation, and was consistent with HRTEM results. In addition, the mass loss curve of TGA experiments showed that DMC addition could enhance the reactivity of soot particles.     

A comprehensive classification method for VOC emission sources to tackle air pollution based on VOC species reactivity and emission amounts

In China, volatile organic compound(VOC) control directives have been continuously released and implemented for important sources and regions to tackle air pollution. The corresponding control requirements were based on VOC emission amounts(EA), but never considered the significant differentiation of VOC species in terms of atmospheric chemical reactivity. This will adversely influence the effect of VOC reduction on air quality improvement. Therefore,this study attempted to develop a comprehensive classification method for typical VOC sources in the Beijing–Tianjin–Hebei region(BTH), by combining the VOC emission amounts with the chemical reactivities of VOC species. Firstly, we obtained the VOC chemical profiles by measuring 5 key sources in the BTH region and referencing another 10 key sources, and estimated the ozone formation potential(OFP) per ton VOC emission for these sources by using the maximum incremental reactivity(MIR) index as the characteristic of source reactivity(SR). Then, we applied the data normalization method to respectively convert EA and SR to normalized EA(NEA) and normalized SR(NSR) for various sources in the BTH region.Finally, the control index(CI) was calculated, and these sources were further classified into four grades based on the normalized CI(NCI). The study results showed that in the BTH region,furniture coating, automobile coating, and road vehicles are characterized by high NCI and need to be given more attention; however, the petro-chemical industry, which was designated as an important control source by air quality managers, has a lower NCI.     

MIL-101高效吸附测定土壤气中三氯乙烯及健康风险评估

为研究基于实测土壤气中ρ（三氯乙烯）计算风险值与Johnson-Ettinger联合Dual-Equilibrium Desorption（JE-DED）模型和J&E模型计算风险值的差异,在MIL-101、UIO-66、ZIF-8和MOF-801金属-有机骨架（MOFs）材料,球形活性炭、膨胀石墨碳吸附材料及HiSiv1000和HiSiv3000分子筛等3类8种吸附剂中筛选出吸附效率较高的MIL-101 MOF材料用以吸附并测定土壤气中ρ（三氯乙烯）,并将基于实测土壤气中ρ（三氯乙烯）计算的风险值与J&E模型和JE-DED模型计算的风险值进行比较.结果表明:①对于北京潮土和黑龙江黑土,J&E模型计算的风险值比基于实测土壤气中ρ（三氯乙烯）计算的风险值高2个数量级.②对于w（有机碳）较低的北京潮土,基于JE-DED模型计算的风险值比基于实测土壤气中ρ（三氯乙烯）计算的风险值高1个数量级,但比基于J&E模型计算的风险值低1个数量级,表明JE-DED模型预测结果更接近实际情况,但仍偏保守.③w（有机碳）较高的黑龙江黑土,JE-DED模型计算的风险值与基于实测土壤气中ρ（三氯乙烯）计算的风险值更接近,JE-DED模型可以比较准确地预测三氯乙烯的风险值.研究显示,采用土壤气中ρ（三氯乙烯）实测值和JE-DED模型进行风险评价在一定程度上可以避免J&E计算过于保守的问题,可以更加真实客观地反映场地污染程度而避免过度修复产生资源浪费.