Semifield assessment of the runoff potential and environmental risk of the parasiticide drug ivermectin under Mediterranean conditions

Introduction  

The antiparasitic ivermectin is of particular concern to regulatory agencies. Ivermectin can reach the environment through the direct emission of dung from livestock on pasture and via manure application on agricultural lands.     

Radioactive impact of Fukushima accident on the Iberian Peninsula: evolution and plume previous pathway

High activity concentrations of several man-made radionuclides (such as (131)I, (132)I, (132)Te, (134)Cs and (137)Cs) have been detected along the Iberian Peninsula from March 28th to April 7th 2011. The analysis of back-trajectories of air masses allowed us to demonstrate that the levels of manmade radionuclide activity concentrations in the southwest of the Iberian Peninsula come from the accident produced in the nuclear power plant of Fukushima. The pathway followed by the radioactive plume from Fukushima into Huelva (southwest of the Iberian Peninsula) was deduced through back-trajectories analysis, and this fact was also verified by the activity concentrations measured of those radionuclides reported in places crossed by this radioactive cloud. In fact, activity concentrations reported by E.P.A., and by IAEA, in several places of Japan, Pacific Ocean and United States of America are according to the expected ones from the air mass trajectory arriving at Huelva province.     

Preparation of Alginic Acid and Metal Alginate from Algae and their Comparative Study

Alginic acid and metal alginates are prepared from fresh algae using extraction method. A FTIR spectrum indicates that alginic acid is converted into the metal alginate. Comparing calcium and cobalt alginates, asymmetric stretching of free carboxyl group of calcium alginate at 1630 cm⁻¹ is shifted to 1585 cm⁻¹ in cobalt alginate, due to the change of charge density, radius and atomic weight of the cation, creating a new environment around the carbonyl group. The strong exothermic peak of alginic acid in DSC thermogram indicates the decomposition of biopolymer, whereas strong exothermic peak of metal alginate in DSC thermogram attributed to the decomposition of biopolymer and formation of respective carbonate. Based on DSC study, the decomposition of cobalt alginate occurs at higher temperature comparing to those of sodium and calcium alginate, which may conclude into the higher stability of cobalt alginate. TGA results reveal that, cobalt alginate is more stable than calcium and sodium alginate at 300 °C temperature. Surface morphology (at same magnification), as well as porosity (%) and pore size distribution results change with metals present in different metal alginates.     

Analysis of Products Generated from the Thermal and Catalytic Degradation of Pure and Waste Polyolefins using Py-GC/MS

The possibility of transforming waste plastics into valuable hydrocarbons via catalytic cracking and reforming is attracting increasing interest. Pyrolysis coupled with Gas Chromatographic separation and Mass Spectrometry detection (Py-GC/MS) has been used in this work to study the product selectivity of various catalysts in the conversion of pure and residual polyethylene samples into hydrocarbon products. Five acid solids of comparable aluminium contents but different textural and acid properties were tested as catalysts, including three zeolites (standard ZSM-5, nanocrystalline n-ZSM-5 and Beta) and two mesostructured solids (Al-MCM-41 and Al-SBA-15). Thermal cracking of the pure and residual polymers generated a similar range of products to each other, with a high proportion of linear paraffins and olefins of varying lengths. The presence of zeolitic materials resulted in complete elimination of heavy linear products, an increase in the light hydrocarbon fraction and a marked selectivity towards the formation of single-ring aromatic species, particularly benzene, toluene and xylene. Aromatic formation was particularly notable with the small crystal size n-ZSM-5 (aromatic selectivity up to 53.9%) and less marked in the case of standard ZSM-5 (up to 36.4%) and Beta zeolite (up to 35.0%). Mesostructured catalysts like Al-MCM-41 and Al-SBA-15 favoured the production of light C₂–C₅ hydrocarbons (up to 57.9%) while the formation of aromatic products was significantly lower than with zeolitic materials. The paper examines the extent and the causes for this product selectivity and discusses its connection with the acid and textural properties of each catalyst. It was also observed that, under the experimental conditions employed, the products generated were not significantly affected by the nature and origin of the polymers employed.     

Cadmium bioaccumulation in three benthic fish species, Salaria basilisca, Zosterisessor ophiocephalus and Solea vulgaris collected from the Gulf of Gabes in Tunisia

To select a marine teleost fish which can be used as a bioindicator of cadmium (Cd) pollution in the Gulf of Gabes in Tunisia, Cd concentrations in liver and gill were compared in three benthic fish species including Salaria basilisca, Zosterisessor ophiocephalus and Solea vulgaris. Fish samples were collected from three selected sites in the Gulf of Gabes, with different degrees of Cd contamination: the industrialized coast of Sfax (S1), the coast of Douar Chatt (S2) and the coast of Luza (S3). The results shows that Cd concentrations in both sediment and water collected from S1 were significantly higher (p < 0.0001) than those from S2 and S3. For each species, Cd concentrations, in both liver and gill, showed the decreasing order: S1 > S2 > S3. The highest concentration of Cd was detected in the liver of S. basilisca, and only S. basilisca showed bioaccumulation factors (BAF) greater than 1 in all studied sites. In S1 and S2, BAF values respect the following order: S. basilisca > Z. ophiocephalus > S. vulgaris. These results of significant bioaccumulation of Cd, in terms of hepatic concentrations and bioaccumulation factors, indicated that S. basilisca can be used as bioindicator to evaluate the evolution of Cd pollution in the Gulf of Gabes.     

Analysis of copper,zinc, cadmium and chromium in fish tissues. A tool for detecting metal caused fish kills

In order to find the causative agent in frequently occuring fish kills in a Belgian river a series of toxicity tests has been conducted in which rudd (Scardinius erythrophtalmus) were exposed to acute lethal and subacute non lethal concentrations of copper, chromium, cadmium and zinc. The concentrations of these metals in gills, opercle, kidney, liver and muscle were measured. Metal levels in gills were the most valuable indicator of acute lethal exposure. This information was compared with levels found in rudd from a surface water storage reservoir and from the river Meuse. Fish collected after fish kills in the river Meuse were analysed. In one case copper could be identified as one of the toxicants concerned by fish tissue analysis. Metal levels in fish tissues can give valuable additional information concerning the cause of kills provided that background information is available about metal levels in water and normal tissue levels.     

Numerical simulation and optimization study of the wind flow through a porous fence

Three turbulence closure models (RNG k-ε, SST k-ω and RSM) were used to investigate the flow characteristics around a two-dimensional isolated porous fence. The comparison between the numerical results and the experimental measurements indicated that RSM model shows a better performance than the other two models. The aim of this paper is to accurately and efficiently determine the optimum porosity that attain the best shelter effect of the wind fence in the near wake region (0–4h_b) and in the far wake region (4h_b–10h_b) respectively, where h_b is the height of the fence. The gradient algorithm was adopted as the optimization algorithm and the RSM model was used to model turbulent features of the flow. The shelter effect was parameterized by the peak velocity ratio involving velocity and turbulence. The objective was to reduce the peak velocity ratio in the near or far wake region by changing the design variable porosity (?) of the fence, which ranged between 2 and 60%. The results revealed that a porosity of 10.2% was found as the optimum value giving rise to the best shelter effect in the near wake region, and ? = 22.1% was determined in the case of the far wake region. In addition, based on the proposed optimization method, it is found that the recirculating bubble behind the fence can only be detected when ? < 29.9%.     

构建金厦示范区海域环境联合管理体系的设想

分析两地海洋环境管理体系互补、互动关系，提出优化管理资源配置，构建一个两地协调的海洋环境管理体系的设想，从体制上解决分割的管理体系与统一的管理目标—金厦海域管理的矛盾。