利用GPS-RTK技术进行既有线曲线整正测量研究

既有线曲线整正测量是铁路既有线提速改造和工务部门大修设计的主要任务之一。需要改造的既有铁路一般均为繁忙干线,并行车密度较高。传统的测量方法是将测量仪器安置在线路上,这样不仅在作业过程中受行车干扰,作业效率也不够高,而曲线地段通视条件差,作业难度是相当大的。同时,作业人员的安全问题也变得十分突出。笔者提出采用先进的GPS-RTK技术,对既有线曲线整正进行测量。采用该技术不仅能克服气候条件的限制,而且能以较高的频率,较高的精度测定互不通视的各被测点的坐标,克服了传统的作业方法要求置镜点与被测点之间必须通视、作业受天气影响、存在误差累积、内业计算工作量大等缺陷。该法在保证作业人员安全的前提下大大提高作业效率。     

布袋除尘器在670 t/h燃煤锅炉上应用的技术经济分析

介绍了焦作电厂3、4号670t／h炉电除尘器改造为布袋除尘器的设计原始资料，结合工程的工艺技术特点以及性能测试结果。重点对电除尘器改为布袋除尘器进行了技术经济分析。     

对实验室污染问题的思考和建议

分析了目前实验室存在的污染种类及危害,阐明实验室是一种不容忽视的污染源,且污染种类复杂,毒害较大.提出实验室污染防治措施.     

企业逆向物流与循环经济立法之联系

逆向物流给企业带来效益的同时,也带来了生态物流的理念.逆向物流涉及了经济与生态环境两大系统,显现出了自身的特点与积极因素.逆向物流充分体现了循环经济发展之宗旨.加速循环经济的立法,并以相应立法来推动企业尽快实施物流活动是至关重要的.     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Biodegradable microplastics (BMPs): a new cause for concern?

Environmental Science and Pollution Research - With the increasingly serious pollution of plastics, biodegradable plastics (BDPs) have attracted attention as a new material that can replace...     

Sugarcane monoculture drives microbial community composition,activity and abundance of agricultural-related microorganisms

Environmental Science and Pollution Research - Sugarcane monoculture (SM) often leads to soil problems, like soil acidification, degradation, and soil-borne diseases, which ultimately pose a...     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

京津冀区域燃煤发电行业大气污染物排放时空变化特征研究

为了科学评估京津冀区域燃煤发电行业特别排放限值和超低排放相关要求实施后的大气污染物减排效果,以行业调查数据为基础,建立了2013年和2015年京津冀区域燃煤发电行业大气污染物排放清单,分析了装机容量与SO_2、NO_x和烟尘排放量的时空耦合关系,讨论了国家相关政策和标准的实施效果。结果显示:区域内2015年燃煤机组装机容量与2013年相比略有下降,SO_2、NO_x和烟尘排放量分别下降75.95%、83.09%和71.20%,减排效果明显。2015年100 MW以下等级机组3种污染物排放总量位居各机组首位,建议通过多种合理方式压减小型燃煤发电机组数量和排放浓度。     

β射线法与重量法监测环境空气PM_(2.5)的应用比较

重量法是测量PM_(2.5)的传统手工经典方法,而β射线法加动态加热系统联用光散射法作为自动在线监测技术的常用方法被广泛使用。将5030-SHARP型β射线法加动态加热系统联用光散射法PM_(2.5)自动监测设备监测结果与手工法测量结果进行比对、分析,结果表明:β射线法与重量法监测结果具有一致性,测量结果不存在显著性差异;β射线法与重量法相对偏差值与温度、相对湿度、风速等气象因子的相关性不明显;β射线法与重量法监测结果的差异性与PM_(2.5)质量浓度、季节等条件有关;随着PM_(2.5)质量浓度逐渐升高,β射线法与重量法相对偏差的绝对值|RD|也随之增大,不同季节的|RD|平均值差异较大,春季、冬季的|RD|平均值大于夏季、秋季。