Regulated and unregulated emissions from modern 2010 emissions-compliant heavy-duty on-highway diesel engines

The U.S. Environmental Protection Agency (EPA) established strict regulations for highway diesel engine exhaust emissions of particulate matter (PM) and nitrogen oxides (NO_x) to aid in meeting the National Ambient Air Quality Standards. The emission standards were phased in with stringent standards for 2007 model year (MY) heavy-duty engines (HDEs), and even more stringent NO_X standards for 2010 and later model years. The Health Effects Institute, in cooperation with the Coordinating Research Council, funded by government and the private sector, designed and conducted a research program, the Advanced Collaborative Emission Study (ACES), with multiple objectives, including detailed characterization of the emissions from both 2007- and 2010-compliant engines. The results from emission testing of 2007-compliant engines have already been reported in a previous publication. This paper reports the emissions testing results for three heavy-duty 2010-compliant engines intended for on-highway use. These engines were equipped with an exhaust diesel oxidation catalyst (DOC), high-efficiency catalyzed diesel particle filter (DPF), urea-based selective catalytic reduction catalyst (SCR), and ammonia slip catalyst (AMOX), and were fueled with ultra-low-sulfur diesel fuel (~6.5 ppm sulfur). Average regulated and unregulated emissions of more than 780 chemical species were characterized in engine exhaust under transient engine operation using the Federal Test Procedure cycle and a 16-hr duty cycle representing a wide dynamic range of real-world engine operation. The 2010 engines’ regulated emissions of PM, NO_X, nonmethane hydrocarbons, and carbon monoxide were all well below the EPA 2010 emission standards. Moreover, the unregulated emissions of polycyclic aromatic hydrocarbons (PAHs), nitroPAHs, hopanes and steranes, alcohols and organic acids, alkanes, carbonyls, dioxins and furans, inorganic ions, metals and elements, elemental carbon, and particle number were substantially (90 to >99%) lower than pre-2007-technology engine emissions, and also substantially (46 to >99%) lower than the 2007-technology engine emissions characterized in the previous study.

Implications:?Heavy-duty on-highway diesel engines equipped with DOC/DPF/SCR/AMOX and fueled with ultra-low-sulfur diesel fuel produced lower emissions than the stringent 2010 emission standards established by the U.S. Environmental Protection Agency. They also resulted in significant reductions in a wide range of unregulated toxic emission compounds relative to older technology engines. The increased use of newer technology (2010+) diesel engines in the on-highway sector and the adaptation of such technology by other sectors such as nonroad, displacing older, higher emissions engines, will have a positive impact on ambient levels of PM, NOx, and volatile organic compounds, in addition to many other toxic compounds.     

Early-phase immunodetection of metallothionein and heat shock proteins in extruded earthworm coelomocytes after dermal exposure to metal ions

This paper provides direct evidence that earthworm immune cells, coelomocytes, are exposed to bio-reactive quantities of metals within 3 days after dermal exposure, and that they respond by upregulating metallothionein (MT) and heat shock protein (HSP70, HSP72) expression. Indirect support for the hypothesis that coelomocytes are capable of trafficking metals was also obtained. Coelomocytes were expelled from adult individuals of Eisenia fetida after 3-day exposure either to metal ions (Zn, Cu, Pb, Cd) or to distilled water (controls) via filter papers. The number of coelomocytes was significantly decreased after Cu, Pb, or Cd treatment. Cytospin preparations of coelomocytes were subjected to immunoperoxidase staining with monoclonal antibodies against human heat shock proteins (HSP70 or HSP72), or rabbit polyclonal antibodies raised against metallothionein 2 (w-MT2) of Lumbricus rubellus. Applied antibodies detected the respective proteins of E. fetida and revealed that the expression of HSP70, HSP72 and w-MT2 proteins was either induced or significantly enhanced in coelomocytes from metal-exposed animals. In conclusion, stress protein expression in earthworm coelomocytes may be used as sensitive biomarkers of metal contaminations. Further experimentation is needed for quantitative analysis of kinetics of metal-induced stress protein expression in earthworm coelomocytes.     

High incidence of deformity in aquatic turtles in the John Heinz National Wildlife Refuge

The John Heinz National Wildlife Refuge is subject to pollution from multiple sources. We studied development of snapping turtle (Chelydra serpentina) and painted turtle (Chrysemys picta) embryos from the refuge from 2000 through 2003. Mean annual deformity rate of pooled painted turtle clutches over four years ranged from 45 to 71%, while that of snapping turtle clutches ranged from 13 to 19%. Lethal deformities were more common than minor or moderate deformities in embryos of both species. Adult painted turtles had a higher deformity rate than adult snapping turtles. Snapping turtles at JHNWR had high levels of PAH contamination in their fat. This suggests that PAHs are involved in the high level of deformities. Other contaminants may also play a role. Although the refuge offers many advantages to resident turtle populations, pollution appears to place a developmental burden on the life history of these turtles.     

Integrating disaster risk reduction in national development planning: experience and challenges of Jamaica

It is generally recognised by the disaster risk management and development communities that disasters have a negative impact on development, and indeed can set back development by years. This realisation led to a new paradigm for the management of hazards and their impacts, namely an integrated approach which emphasises disaster risk reduction being incorporated into national development planning. Awareness, however, does not necessarily translate into implementation. ‘Reduce the underlying risk factors’, Priority for Action 4 of The Hyogo Framework for Action 2005–2015, reported the lowest average score for progress of the five priority areas. Challenges to progress, as reported by Governments included inappropriate development practices, high levels of poverty and other factors which increase vulnerability. Various authors have recognised the difficulty of consistently and successfully integrating disaster risk reduction into development planning. This integration is particularly challenging for Small Island Developing States (SIDS) which face high exposure to hazards, vulnerable populations and limited resources, often both human and financial. The efforts of Jamaica, a Caribbean SIDS, at integrating disaster risk reduction into national development, and some factors which proved to be important in making progress are presented here. This retrospective paper is written from the perspective of a participant observer and traces developments in disaster risk management over three decades, 1980–2010. Integration and inclusiveness, use of quantitative methods and application of risk assessments are identified as being important in gaining acceptance for disaster risk reduction.     

Movement and environmental preferences of Greenland sharks (<Emphasis Type="Italic">Somniosus microcephalus</Emphasis>) electronically tagged in the St. Lawrence Estuary,Canada

Three Greenland sharks (Somniosus microcephalus) were tagged with electronic tags, in Baie St. Pancrace, St. Lawrence Estuary, Quebec, Canada. One shark was tagged on 23 July 2004, with an acoustic telemetry tag. Two sharks were each tagged with a pop-up satellite archival tag (PSAT) on 27 August 2004. Two of the sharks remained in or close to the bay, one for 47 days and the other for at least 66 days. The third shark left the bay immediately after tagging on 27 August 2004. This shark entered the main channel of the St. Lawrence Estuary, and had moved 114.9 km upstream by 1 November 2004 when the tag reported to ARGOS satellites. The tags provided a total of 179 days of data on the movement and environmental preferences of Greenland sharks in the St. Lawrence Estuary. Sharks that reported depth and ambient water temperature data from the bay showed significant diel differences in depth preferences and corresponding ambient temperatures. The sharks remained near the bottom of the water column during the day and displayed increased vertical movements at night. The shark that resided in the main channel did not show this pattern, but generally remained at depths between 325 and 352 m. Sharks in the bay experienced water temperatures that ranged from −1.1 to 8.6°C at depths from 0 to 67 m. In the main channel the shark experienced temperatures that ranged from 1.0 to 5.4°C at depths from 132 to 352 m. This is the first report of numerous Greenland sharks inhabiting shallow near shore bays during summer and autumn.     

An enhanced sustainable approach for design and manufacturing with an application to fuselages for mono-seat civil sailplanes

Abstract

A number of tools and software systems have been developed in order to reduce the time for the design and manufacturing of industrial products. Nowadays, virtual modelling by Computer Aided Design (CAD) systems and process simulation by the application of Finite Element Method (FEM) software is a standard routine in order to compress product design activities and to achieve the optimal solution before producing any real components. These developments provided not only a reduction in the time to market but a higher complexity of the project and an improved quality of the industrial products. With the aim to further improve the sustainability of this activity, the implementation of a tool that adds automatic operations into the design activity is demonstrated. This software can interact with any CAD and helps designers when the object dimension and shape can be affected by limits and constraints deriving from different features and targets, such as the spatial collocation of the component and the interaction with other limiting items, for examples the material and the manufacturing issues. The concept was developed into the software SFIDA (Sailplane Fuselage Integrated Design Application) that is a first attempt to automatically manage multiple relations and optimise their combination.     

Vegetation of the selected forest stands and land use in the Carpathian Mountains

Within the framework of the project "Effects of forest health on biodiversity with emphasis on air pollution in the Carpathian Mountains" 26 permanent study sites were established in the vicinity of the ozone monitoring sites. The study sites were located on the NW-SE transect through the Western (12 sites), Eastern (11 sites) and Southern (3 sites) Carpathians in forest ecosystems typical of each area. Some of the forest monitoring sites were located in national parks, biosphere reserves and areas of protected landscape. Each permanent site of 0.7 ha area consisted of 5 small 500m(2) circular plots, arranged in the form of a cross, i.e. four placed on the cardinal points (N, E, S, W) and one in the center. Phytosociological records were done twice during the 1998 growing season using the Braun-Blanquet's method. The study sites represented various types of forest: Picea abies stands (8), beech (Fagus sylvatica) stands (10), fir (Abies alba) stands (2) and mixed beech-fir, spruce-fir and beech-spruce stands (6). Age of most stands was 80-100 years. Degree of crown damage varied greatly between sites, a percentage of damaged trees decrease in Carpathians from West to East. It corresponds well with the O(3) level in these areas. Typical damage by O(3) in herb layer species in several Carpathian sites were found. Land-use map for the entire Carpathian Mountains and two detailed land use maps for Tatras (Western Carpathians) and Retezat (Southern Carpathians) are presented. A little more than half of the Carpathian territory is forested. The most densely forested are Eastern Carpathians, while the most sparsely Western Carpathians. Arable lands occupy 22.6% of the Carpathians, pastures and meadows 6.2%, water bodies 1.9%, and build up areas several percent. In the highest elevation of the Carpathians alpine meadows (11.3%) and rocks (3.5%) are distributed.     

Cadmium leaching from micro-lysimeters planted with the hyperaccumulator Thlaspi caerulescens: experimental findings and modeling

The use of heavy metal hyperaccumulating plants has the potential to become a promising new technique to remediate contaminated sites. We investigated the role of metal mobilization in the Cd hyperaccumulation of Thlaspi caerulescens (J. & C. Presl, 'Ganges'). In a micro-lysimeter experiment we investigated the dynamics of Cd concentration of leachate as well as Cd removal by plant uptake in four treatments: (i) Control (bare soil), (ii) T. caerulescens, (iii) nonhyperaccumulator Brassica juncea (L.) Czern. ('PI 426308'), and (iv) co-cropping of the hyperaccumulator and nonhyperaccumulator. The experimental findings were analyzed using one- and two-site rate-limited desorption models. Co-cropping of T. caerulescens and B. juncea did not enhance metal uptake by B. juncea. Although Cd uptake of T. caerulescens was 10 times higher than that of B. juncea, the Cd concentration of leachate of the T. caerulescens treatment did not decrease below that of the B. juncea treatment. The Cd depletion in leachate was well reproduced by the two-site rate-limited desorption model. The optimized desorption coefficient was three orders of magnitude higher in the rhizosphere than in the bulk soil. Our results indicate that T. caerulescens accelerates the resupply of Cd from soil pointing to an important role of kinetic desorption in the hyperaccumulation by T. caerulescens.     

Application of decision tools to ethical analysis in biodiversity conservation

Achieving ethically responsible decisions is crucial for the success of biodiversity conservation projects. We adapted the ethical matrix, decision tree, and Bateson's cube to assist in the ethical analysis of complex conservation scenarios by structuring these tools so that they can implement the different value dimensions (environmental, social, and animal welfare) involved in conservation ethics. We then applied them to a case study relative to the decision-making process regarding whether or not to continue collecting biomaterial on the oldest of the two remaining northern white rhinoceroses (Ceratotherium simum cottoni), a functionally extinct subspecies of the white rhinoceros. We used the ethical matrix to gather ethical pros and cons and as a starting point for a participatory approach to ethical decision-making. We used decision trees to compare the different options at stake on the basis of a set of ethical desiderata. We used Bateson's cube to establish a threshold of ethical acceptability and model the results of a simple survey. The application of these tools proved to be pivotal in structuring the decision-making process and in helping reach a shared, reasoned, and transparent decision on the best option from an ethical point of view among those available.