Ozone exposure among Mexico City outdoor workers

In researching health effects of air pollution, pollutant levels from fixed-site monitors are commonly assigned to the subjects. However, these concentrations may not reflect the exposure these individuals actually experience. A previous study of ozone (O3) exposure and lung function among shoe-cleaners working in central Mexico City used fixed-site measurements from a monitoring station near the outdoor work sites as surrogates for personal exposure. The present study assesses the degree to which these estimates represented individual exposures. In 1996, personal O3 exposures of 39 shoe-cleaners working outdoors were measured using an active integrated personal sampler. Using mixed models, we assessed the relationship between measured personal O3 exposure and ambient O3 measurements from the fixed-site monitoring station. Ambient concentrations were approximately 50 parts per billion higher, on average, than personal exposures. The association between personal and ambient O3 was highly significant (mixed model slope p < 0.0001). The personal/ambient ratio was not constant, so use of the outdoor monitor would not be appropriate to rank O3 exposure and evaluate health effects between workers. However, the strong within-worker longitudinal association validates previous findings associating day-to-day changes in fixed-site O3 levels with adverse health effects among these shoe-cleaners and suggests fixed-site O3 monitors may adequately estimate exposure for other repeated-measure health studies of outdoor workers.     

A practical method for quantification of phosphorus- and glycogen-accumulating organism populations in activated sludge systems.

Enhanced biological phosphorus removal (EBPR) from wastewater relies on the enrichment of activated sludge with phosphorus-accumulating organisms (PAOs). The presence and proliferation of glycogen-accumulating organisms (GAOs), which compete for substrate with PAOs, may be detrimental for EBPR systems, leading to deterioration and, in extreme cases, failure of the process. Therefore, from both process evaluation and modeling perspectives, the estimation of PAO and GAO populations in activated sludge systems is a relevant issue. A simple method for the quantification of PAO and GAO population fractions in activated sludge systems is presented in this paper. To develop such a method, the activity observed in anaerobic batch tests executed with different PAO/GAO ratios, by mixing highly enriched PAO and GAO cultures, was studied. Strong correlations between PAO/GAO population ratios and biomass activity were observed (R2 > 0.97). This served as a basis for the proposal of a simple and practical method to quantify the PAO and GAO populations in activated sludge systems, based on commonly measured and reliable analytical parameters (i.e., mixed liquor suspended solids, acetate, and orthophosphate) without requiring molecular techniques. This method relies on the estimation of the total active biomass population under anaerobic conditions (PAO plus GAO populations), by measuring the maximum acetate uptake rate in the presence of excess acetate. Later, the PAO and GAO populations present in the activated sludge system can be estimated, by taking into account the PAO/GAO ratio calculated on the basis of the anaerobic phosphorus release-to-acetate consumed ratio. The proposed method was evaluated using activated sludge from municipal wastewater treatment plants. The results from the quantification performed following the proposed method were compared with direct population estimations carried out with fluorescence in situ hybridization analysis (determining Candidatus Accumulibacter Phosphatis as PAO and Candidatus Competibacter Phosphatis as GAO). The method showed to be potentially suitable to estimate the PAO and GAO populations regarding the total PAO-GAO biomass. It could be used, not only to evaluate the performance of EBPR systems, but also in the calibration of potential activated sludge mathematical models, regarding the PAO-GAO coexistence.     

A comparison of indigenous mosses and topsoils for use in monitoring atmospheric heavy metal deposition in Galicia (northwest Spain)

Samples of moss (Scleropodium purum or, in its absence, Hypnum cupressiforme) and of topsoil (0-5 cm) were collected in the spring of 1995, from 75 sites distributed throughout Galicia (northwest Spain) in order to compare the potential usefulness of each in evaluating the atmospheric deposition of contaminants. Analysis was made of the total content of various metals in the moss and of different soil metal fractions (including total metal content, labile metals and metals bound to organic material). We found that the labile fraction most closely resembled the metal content of the moss. Calculation of enrichment factors allowed us to show that the soil was not, except in the case of Cr, the main source of contamination in the moss. By comparing contamination factors of metals in moss and soil fraction samples we found that moss samples were more useful for evaluating the degree of contamination at different sites.     

Hydroxylated PCB metabolites in nonhatched fulmar eggs from the Faroe Islands

Thirty-six polychlorinated biphenylols (OH-PCBs) congeners were characterized in Fulmar (Fulmarus glacialis) eggs collected from the Faroe Islands. The seven most abundant congeners were quantified in 19 samples, and the sigmaOH-PCB concentrations ranged between 0.92 and 4.0 ng g(-1) fresh weight (f.w.). These eggs constitute a part of the traditional diet for at least a part of the population on the Faroe Islands and may contribute to the high levels of these contaminants found in the blood of pregnant Faroese women. Because the metabolites are present in the nonhatched fulmar egg, it is concluded that the OH-PCBs are transferred to the egg before laying. High levels, 3300-18,000 ng g(-1) l.w., of sigmapolychlorinated biphenyls (PCB) were determined in the fulmar eggs, which are a considerable source for human exposure. The high PCB levels are a source for metabolic formation of hydroxylated PCBs.     

Evaluation of relative photonic efficiency in heterogeneous photocatalytic reactors

The evaluation of photonic efficiency in heterogeneous photocatalysis remains elusive because the number of absorbed photons is difficult to assess experimentally. The photonic efficiency of heterogeneous photocatalytic reactors depends on the reactor geometry, irradiation source, and photocatalyst properties. In this work, the relative photonic efficiency of heterogeneous photocatalytic reactors to degrade an azo dye was evaluated using phenol as the standard system. The experimental tests were carried out in a batch reactor under different conditions of pH, catalyst dosage, initial concentration, and ultraviolet (UV) lamps. The kinetics of disappearance of both phenol and azo dye were studied using the initial rate method and were described according to the Langmuir-Hinshelwood (L-H) kinetic model. It was observed that the relative photonic efficiency depends on the adsorption/desorption properties of the photocatalyst.     

Levels of polychlorinated biphenyls and organochlorine pesticides in serum samples of Egyptian Vulture (Neophron percnopterus) from Spain

Concentrations of 23 polychlorinated biphenyls (PCBs), p,p'-DDT and two of its metabolites, p,p'-DDE and p,p'-TDE have been measured in serum samples of up to 1 ml of Egyptian Vulture (Neophron percnopterus) gathered from five populations in Spain. SigmaPCB concentrations were found to be in the range 3.2-97 ng/ml, while those of SigmaDDTs ranged from 0.93 to 38 ng/ml. p,p'-DDT/p,p'-DDE ratios higher than one were only found in the Segovia population, which could be an indication of recent use of p,p'-DDT in the area. In all cases, PCB profiles were dominated by congeners 52, 132 + 105, 138, 153 and 180. However, some differences among the five populations studied became evident when their profiles were compared with those of technical PCB mixtures by principal components analysis. The DDT and PCB levels detected in the serums analysed were lower than those previously reported for similar avian species and those reported to have deleterious effects on survival or reproduction of birds.     

Prediction of ozone concentration in ambient air using multivariate methods

Multivariate statistical methods including pattern recognition (Principal Component Analysis--PCA) and modeling (Multiple Linear Regression--MLR, Partial Least Squares--PLS, as well as Principal Component Regression--PCR) methods were carried out to evaluate the state of ambient air in Miskolc (second largest city in Hungary). Samples were taken from near the ground at a place with an extremely heavy traffic. Although PCA is not able to determine the significance of variables, it can uncover their similarities and classify the cases. PCA revealed that it is worth to separate day and night data because different factors influence the ozone concentrations during all day. Ozone concentration was modeled by MLR and PCR with the same efficiency if the conditions of meteorological parameters were not changed (i.e. morning and afternoon). Without night data, PCR and PLS suggest that the main process is not a photochemical but a chemical one.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part I: nitrate removal using a selective anion exchanger in the bicarbonate form with reuse of the regenerant solution.

The process of selective nitrate removal from drinking water by means of ion exchange was studied. A commercial strong base anion exchanger with triethylammonium (-N+Et3) functional groups was used in the bicarbonate (HCO3-) and carbonate (CO3(2-)) form. The aim of this study was to optimize ion-exchanger regeneration in view of the subsequent electrochemical reduction of nitrates in the spent regenerant solution. The effects of ion-exchanger form, concentration of regenerant solution, and presence of nitrates, chlorides, and sulphates in the regenerant solution were studied. The strong base anion exchanger in HCO3- form that was investigated was able to treat 270 bed volumes of model water solution containing 124 mg dm(-3) nitrates. To achieve adequate regeneration of the saturated anion exchanger, it is necessary to use approximately 30 bed volumes of fresh 1-M sodium bicarbonate (NaHCO3) regenerant solution. The presence of residual 50-mg dm(-3) nitrates in the regenerant solution, treated by electrolysis, resulted in an increase in the dose of regenerant solution to 35 bed volumes and a decrease in the subsequent sorption run of approximately 13%. The volume of applied regenerant solution was high, but the consumption of NaHCO3 for regeneration was low.     

Assessment of tin and butyltin species in estuarine superficial sediments from Gipuzkoa,Spain

Ten superficial sediments from river estuaries of Gipuzkoa (North Spain) were collected and analyzed for nine metals (including tin, Sn) and butyltin compounds (monobutyltin, MBT; dibutyltin, DBT; tributyltin, TBT). Total metal concentration in the fine fraction (<63 micrometer) of the sediment was determined in aqua regia--hydrofluoric acid extracts by atomic absorption spectrometry. The butyltin species (BTs) were firstly extracted from the sediments with hydrochloric acid-methanol mixture. After derivatization with sodium tetraethyl borate, the organotin compounds were extracted by solid phase microextraction (SPME) in headspace mode. A fiber coated with 100 micrometer poly(dimethylsiloxane) was used for SPME. The organotin species were analyzed by gas chromatography-flame ionization detection. Analysis of the certified reference sediment (PACS-2) shown the suitability of the procedures for determination of metal contents and DBT-TBT species in contaminated sediments. Factorial analysis was used to examine the main sources of metals. Three factors represented more than 89% of the total variance of the metal system, and the Sn was related with Cu-Zn-Pb suggesting the same pollution source. The BTs concentrations in the area were high (TBT ranged from 0.05 to 5.48 mg Sn kg(-1)). The percentage of total butyltin species ( summation operator BTs) respect to the total Sn amount was higher than 4% in all the sediments, showing in the Bidasoa river estuary a remarkable value higher than 20%. Hence, the studied estuarine sediments reflect a pollution that is related with historical industrial and fishing activities of the area.     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.