Comparison of different stomatal conductance algorithms for ozone flux modelling

A multiplicative and a semi-mechanistic, BWB-type [Ball, J.T., Woodrow, I.E., Berry, J.A., 1987. A model predicting stomatal conductance and its contribution to the control of photosynthesis under different environmental conditions. In: Biggens, J. (Ed.), Progress in Photosynthesis Research, vol. IV. Martinus Nijhoff, Dordrecht, pp. 221-224.] algorithm for calculating stomatal conductance (g(s)) at the leaf level have been parameterised for two crop and two tree species to test their use in regional scale ozone deposition modelling. The algorithms were tested against measured, site-specific data for durum wheat, grapevine, beech and birch of different European provenances. A direct comparison of both algorithms showed a similar performance in predicting hourly means and daily time-courses of g(s), whereas the multiplicative algorithm outperformed the BWB-type algorithm in modelling seasonal time-courses due to the inclusion of a phenology function. The re-parameterisation of the algorithms for local conditions in order to validate ozone deposition modelling on a European scale reveals the higher input requirements of the BWB-type algorithm as compared to the multiplicative algorithm because of the need of the former to model net photosynthesis (A(n)).     

Atmospheric oxidation capacity in the summer of Houston 2006: Comparison with summer measurements in other metropolitan studies

Both similarities and differences in summertime atmospheric photochemical oxidation appear in the comparison of four field studies: TEXAQS2000 (Houston, 2000), NYC2001 (New York City, 2001), MCMA2003 (Mexico City, 2003), and TRAMP2006 (Houston, 2006). The compared photochemical indicators are OH and HO₂ abundances, OH reactivity (the inverse of the OH lifetime), HO_x budget, OH chain length (ratio of OH cycling to OH loss), calculated ozone production, and ozone sensitivity. In terms of photochemical activity, Houston is much more like Mexico City than New York City. These relationships result from the ratio of volatile organic compounds (VOCs) to nitrogen oxides (NO_x), which are comparable in Houston and Mexico City, but much lower in New York City. Compared to New York City, Houston and Mexico City also have higher levels of OH and HO₂, longer OH chain lengths, a smaller contribution of reactions with NO_x to the OH reactivity, and NO_x-sensitivity for ozone production during the day. In all four studies, the photolysis of nitrous acid (HONO) and formaldehyde (HCHO) are significant, if not dominant, HO_x sources. A problematic result in all four studies is the greater OH production than OH loss during morning rush hour, even though OH production and loss are expected to always be in balance because of the short OH lifetime. The cause of this discrepancy is not understood, but may be related to the under-predicted HO₂ in high NO_x conditions, which could have implications for ozone production. Three photochemical indicators show particularly high photochemical activity in Houston during the TRAMP2006 study: the long portion of the day for which ozone production was NO_x-sensitive, the calculated ozone production rate that was second only to Mexico City's, and the OH chain length that was twice that of any other location. These results on photochemical activity provide additional support for regulatory actions to reduce reactive VOCs in Houston in order to reduce ozone and other pollutants.     

Hillslope terracing effects on the spatial variability of plant development as assessed by NDVI in vineyards of the Priorat region (NE Spain)

The availability of heavy machinery and the vineyard restructuring and conversion plans of the European Union Common Agricultural Policy (Commission Regulation EC no. 1227/2000 of 31 May 2000) have encouraged the restructuring of many vineyards on hillslopes of Mediterranean Europe, through the creation of terraces to favor the mechanization of agricultural work. Terrace construction requires cutting and filling operations that create soil spatial variability, which affects soil properties and plant development. In the present paper, we study the effects of hillslope terracing on the spatial variability of the normalized difference vegetation index (NDVI) in fields of the Priorat region (NE Spain) during 2004, 2005, and 2006. This index was computed from high-resolution remote sensing data (Quickbird-2). Detailed digital terrain models before and after terrace construction were used to assess the earth movements. The results indicate that terracing by heavy machinery induced high variability on the NDVI values over the years, showing significant differences as effect of the cut and fill operations.     

The impact of Six Sigma in the performance of a Pollution Prevention program

The diffusion of Pollution Prevention faces organizational barriers as for instance resistance to change, insufficient support from decision-makers, unclear project leadership, insufficient employee accountability and inflexible organizational structures. To understand how to overcome such barriers, the performance of a Pollution Prevention program of a multinational corporation is analyzed. The quantitative analyses of 2096 Pollution Prevention projects conducted between 1995 and 2007 support the conclusion that the performance of the Pollution Prevention program increased after the implementation of the Six Sigma program. Moreover, the analyses of 1906 Pollution Prevention projects and 31,133 Six Sigma projects for cost reduction in 27 countries indicate that in countries where the implementation of Six Sigma is more expressive, pollution is prevented more than in countries with less expressive Six Sigma implementation. In fact, the Six Sigma implementation improved the organizational capability for data based project management. Therefore, comparing six years before and six years after the Six Sigma implementation, the total number of Pollution Prevention projects recognized increased 6.9 times and the total amount of pollution prevented increased by 62%. The qualitative analysis describes how the Six Sigma program interacts with the Pollution Prevention program in the studied company.     

Decisive factors in the creation and execution of municipal action plans in the field of sustainable development in the European Union

The process of raising public awareness around the world concerning the need to apply criteria of sustainable development was basically set in motion at the Rio de Janeiro Summit in 1992. There it was decided that the most suitable context for fostering the process is the local level, and the Local Action Plan forms a basic element in this process.Some preliminary studies have shown the evidence of great advancement in the creation of Local Action Plans in municipalities. However, their execution is frequently paralyzed by a lack of necessary resources and suitable State policies.The aim of this paper is to verify the effect that different factors might have on the degree of progress made by the Local Action Plan in the municipalities of the European Union.The results show that the public works policies of the EU and the governments of the member states fail to impact the level of commitment of municipal governments; however, when the supporting policy originates from administrations closer to the municipality and are made concrete in the form of economic support and technical advice, they prove to be relevant. Strictly political factors, such as stability, have a more limited yet significant effect on the execution of Local Action Plans.     

Mitigation of energy intensity of an industrial off-gas cleaning system using process engineering solutions

In smelting processes, a large amount of off-gas emission is often generated, which can cause serious environmental and plant hygiene problems if not properly treated. Off-gas cleaning systems extract and treat the hazardous emissions, and ensure that the smelter operation is in accordance with environmental and industrial hygiene regulations. To this end, it is paramount that a well-designed control structure be incorporated into the system. In this work a plantwide control design procedure is applied to an industrial nickel smelter furnace off-gas cleaning system. We first approach the problem by conducting a steady-state analysis based on a nonlinear model of the process, where the objective is to determine how to achieve safe, clean and economic operation in terms of energy consumption. Results reveal that a large amount of energy can be saved by controlling the temperature in the furnace freeboard at its upper bound (active constraint). For the same reason, the temperatures in the two louvers (active constraints) should be controlled at their respective upper bounds so to minimize air intake into the system. The selection of the “unconstrained” variable to be controlled is found by applying the self-optimizing control technique, and the results indicate that a small loss is acceptable when one of the manipulated variables is fixed at its nominal optimal operating point, a highly desirable choice from an operational viewpoint. The bottleneck of the system is identified as the fans' discharge pressures when we allow the feed rate as a degree of freedom. Furthermore, a design change consisting of the installation of an auxiliary air intake in the smelter furnace shows to be a very effective economic alternative to minimize energy consumption. A control structure is then designed where the issue is to keep pressures in the system well within the negative region by determining the configuration of the regulatory and supervisory control layers such that acceptable dynamic performance in face of known, deterministic disturbance is achieved. Nonlinear dynamic simulations are performed to validate the suggested control structure for both modes of operation in the original system and in the proposed design change. The results showed that both regulatory and supervisory designs should make use of the simplicity of decentralized PI control schemes associated with some cascaded configurations so as to boost the disturbance rejection capabilities of the system.