常温低基质厌氧氨氧化反应器启动及其稳定性

以上向流生物滤池为反应器,以实验室内氧化沟回流污泥为接种污泥,采用先培育好氧生物膜,后转为厌氧环境培育厌氧氨氧化生物膜的方式,成功实现了常温低基质浓度下厌氧氨氧化反应器的启动。控制反应器进水pH为7.50～7.80,NH4+-N为30～40 mg/L,NO2--N为35～50 mg/L,温度为20～25℃。224 d以后,反应器启动成功。在稳定运行阶段,出水亚硝氮和氨氮的平均浓度分别为1.4 mg/L和4.6 mg/L,平均去除率分别为95.3%和90.1%,去除比例为1～1.8∶1,主要集中在1.4～1.5∶1,亚硝氮和氨氮去除的容积负荷分别为104.2 mg/(L.d)和146.0 mg/(L.d)。     

区域可持续发展能力的AHP综合评价

从经济可持续、社会可持续和生态可持续三个角度出发,建立区域可持续发展评价的指标体系,根据山东省1996年、2000年及2004年可持续发展调查数据,建立多目标线性加权函数对该可持续发展体系进行了综合评价模型,运用层次分析法(AHP)计算评价体系中各单项指标、领域层及子系统层的评价权重,分析结果表明山东省的可持续发展呈现逐步上升的态势,但与建立"和谐山东"的发展目标仍存在很大差距.该评价模型原理简单,可操作性强,对于政府管理及宏观决策部门有一定的应用价值.     

自我决定理论在环境教育中的应用

自我决定理论指在自我决定的意义上说,行为是主观上自主选择、自主决定的,而不是迫于某种内在需要或外在力量的压力。自我决定动机区分了促进内部动机的社会环境,分别涉及三种不同的心理需要：胜任、自主和关系。三个基本的需要缺一不可,也就是说只有在三个基本心理需要都得到满足时,自我决定动机和自我决定行为才能产生。教师在环境教育课程中运用自我决定理论培养学生环境动机,可采用三种教学策略：获取学校其他教师、行政人员、家长和社会的支持;选择学生感兴趣的,具有挑战性的问题;采用合作学习与探究学习的方式。     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

垃圾填埋场渗滤液污染控制技术研究进展

垃圾渗滤液是垃圾填埋过程中产生的一种有机浓度高、成分复杂的污水,对周边生态环境和人们身心健康影响极大。本文详细介绍了垃圾渗滤液的水质特征及国内外各类控制技术,并进行了对比分析,提出是源头控制重点,处理是保障的污染控制新思路。     

生活垃圾中废塑料分选回收技术概述

近年来,废塑料在城市生活垃圾中占有相当大的比例,其含量正呈逐年上涨的趋势,因此对塑料进行分选和资源化利用势在必行。塑料分选技术是摆在我们中间的一项难题,目前生活垃圾废塑料的分选技术五花八门．由于在全国各地废塑料在垃圾中的还水量等因素的影响,现实中能实现废塑料的分选还不成熟。因此,研究一套适合废塑料的分选技术迫在眉睫。     

硫酸羟胺的自加速分解温度和稳定性研究

通过快速筛选热分析试验对硫酸羟胺热危险性进行定性分析,对其热分解过程进行初步研究,获得温度、压力变化规律;再运用C80微量热仪对硫酸羟胺进行深入分析,得到硫酸羟胺的化学反应动力学参数,根据Semenov模型计算其自加速分解温度（SADT）。试验结果表明：由RSD初步筛选试验得到硫酸羟胺在164．2℃时即发生分解放热;用C80法得到硫酸羟胺的起始热分解温度为137．1℃,并计算了该物质在3种典型包装下的自加速分解温度。由SADT得到储存、运输过程中硫酸羟胺的控制温度,从而为减少硫酸羟胺事故的发生提供必要的参考数据。     

城市生活垃圾卧式气流分选特性研究

利用处理能力100 kg/h的卧式气流分选机开展生活垃圾中塑料分选实验。实验结果表明:进风角度为10°、15°时,分别对应存在>8.5 m/s、7.7～9.3 m/s的风速范围,使塑料的纯度和分选效率达到80%以上;利用Fluent软件模拟,结果表明:进风角度>15°时,分选机内气流复杂,塑料纯度和分选效率的波动性大,仅存在较窄的风速范围可使总纯度和分选效率同时达到80%以上。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

化学法综合治理草浆造纸黑液的研究

本文采用凝聚-离心分离法对黑液进行预除硅,酸析沉淀法回收黑液中的木质素,并重点研究了混凝法和催化氧化法除去经提取木质素后的黑液中COD的最佳条件.研究结果表明,采用预先除硅-酸析沉淀-混凝-催化氧化联合流程可有效地处理黑液,处理水COD小于300mg/L,同时回收了木质素.