Atmospheric nitrogen fluxes at the Belgian coast: 2004–2006

Daily and seasonal variations in dry and wet atmospheric nitrogen fluxes have been studied during four campaigns between 2004 and 2006 at a coastal site of the Southern North Sea at De Haan (Belgium) located at coordinates of 51.1723° N and 3.0369° E. Concentrations of inorganic N-compounds were determined in the gaseous phase, size-segregated aerosol (coarse, medium, and fine), and rainwater samples. Dissolved organic nitrogen (DON) was quantified in rainwater. The daily variations in N-fluxes of compounds were evaluated with air-mass backward trajectories, classified into the main air-masses arriving at the sampling site (i.e., continental, North Sea, and Atlantic/UK/Channel).The three, non-episodic campaigns showed broadly consistent fluxes, but during the late summer campaign exceptionally high episodic N-deposition was observed. The average dry and wet fluxes for non-episodic campaigns amounted to 2.6 and 4.0 mg N m^?2 d^?1, respectively, whereas during the episodic late summer period these fluxes were as high as 5.2 and 6.2 mg N m^?2 d^?1, respectively.Non-episodic seasons/campaigns experienced average aerosol fluxes of 0.9–1.4 mg N m^?2 d^?1. Generally, the contribution of aerosol NH₄⁺ was more significant in the medium and fine particulate fractions than that of aerosol NO₃^?, whereas the latter contributed more in the coarse fraction, especially in continental air-masses. During the dry mid-summer campaign, the DON contributed considerably (～15%) to the total N-budget.Exceptionally high episodic aerosol-N inputs have been observed for the late summer campaign, with especially high deposition rates of 3.6 and 2.9 mg N m^?2 d^?1 for Atlantic/UK/Channel and North Sea-continental (mixed) air-masses, respectively. During this pollution episode, the flux of NH₄⁺ was dominating in each aerosol fraction/air-mass, except for coarse continental aerosols. High deposition of gaseous-N was also observed in this campaign with an average total N-flux of 2–2.5-times higher than in other campaigns.     

Do international investment contribute to environmental pollution? Evidence from 20 African countries

Environmental Science and Pollution Research - International investment is needed in every economy, and every economy is expected to grow and attract investment. Despite the need of the above in...     

The geomorphology and ecosystem service economic value baselines of tributary watersheds in Malaysia

Environment, Development and Sustainability - This study presents how a cluster of tributary watersheds was evaluated for geomorphology and ecosystem service economic value baselines. Tributary...     

Monofluorinated analogues of polychlorinated biphenyls (F-PCBs): synthesis using the Suzuki-coupling, characterization, specific properties and intended use

An improved method, a palladium-catalyzed cross-coupling reaction the so-called Suzuki-coupling, was used to synthesize 19 monofluorinated analogues (F-PCBs) of polychlorinated biphenyls (PCBs), including analogues of PCBs 28, 52 and 81. The coupling of chlorinated and/or fluorinated isomers of aryl boronic acids with bromo- and/or iodobenzenes gave the desired F-PCB congeners in good to excellent yields. The self-coupling product of the aryl boronic acids was the major impurity, but this limitation could be minimized. The influence of ortho-substitution by chlorine on the reaction time was studied in detail. The F-PCBs were characterized by means of ¹H and ¹⁹F NMR and mass spectrometry (MS). F-PCBs show remarkably similar characteristics in many aspects to those of the corresponding non-fluorinated parent PCBs. Since fluorine is generally resistant to degradation, once incorporated into a substrate it functions as an indelible label that can be used to monitor structures and dynamics. F-PCBs may prove their usefulness as markers and tracers in mechanistic and toxicological studies. The aim of further research will be to test the suitability of fluorine as a sensitive probe in a broad range of applications, including synthesis, analytical, mechanistic and toxicological studies.     

Characterisation of particulate matter and gaseous emissions from a large ship diesel engine

Composition of exhaust from a ship diesel engine using heavy fuel oil (HFO) was investigated onboard a large cargo vessel. The emitted particulate matter (PM) properties related to environmental and health impacts were investigated along with composition of the gas-phase emissions. Mass, size distribution, chemical composition and microphysical structure of the PM were investigated. The emission factor for PM was 5.3 g (kg fuel)^?1. The mass size distribution showed a bimodal shape with two maxima: one in the accumulation mode with mean particle diameter D_P around 0.5 μm and one in the coarse mode at D_P around 7 μm. The PM composition was dominated by organic carbon (OC), ash and sulphate while the elemental carbon (EC) composed only a few percent of the total PM. Increase of the PM in exhaust upon cooling was associated with increase of OC and sulphate. Laser analysis of the adsorbed phase in the cooled exhaust showed presence of a rich mixture of polycyclic aromatic hydrocarbon (PAH) species with molecular mass 178–300 amu while PM collected in the hot exhaust showed only four PAH masses.Microstructure and elemental analysis of ship combustion residuals indicate three distinct morphological structures with different chemical composition: soot aggregates, significantly metal polluted; char particles, clean or containing minerals; mineral and/or ash particles. Additionally, organic carbon particles of unburned fuel or/and lubricating oil origin were observed. Hazardous constituents from the combustion of heavy fuel oil such as transitional and alkali earth metals (V, Ni, Ca, Fe) were observed in the PM samples.Measurements of gaseous composition in the exhaust of this particular ship showed emission factors that are on the low side of the interval of global emission factors published in literature for NO_x, hydrocarbons (HC) and CO.     

Fenton based remediation of polycyclic aromatic hydrocarbons-contaminated soils

This paper aims to review the applications of Fenton based treatments specifically for polycyclic aromatic hydrocarbons-contaminated soils. An overview of the background and principles of Fenton treatment catalysed by both homogenous (conventional and modified Fenton) and heterogeneous (Fenton-like) catalysts is firstly presented. Laboratory and field soil remediation studies are then discussed in terms of efficiency, kinetics and associated factors. Four main scopes of integrated Fenton treatments, i.e. physical-Fenton, biological-Fenton, electro-Fenton and photo-Fenton are also reviewed in this paper. For each of these integrated remediation technologies, the theoretical background and mechanisms are detailed alongside with achievable removal efficiencies for polycyclic aromatic hydrocarbons in contaminated soils compared to sole Fenton treatment. Finally, the environmental impacts of Fenton based soil treatments are documented and discussed.     

Transcriptional response of stress genes to metal exposure in zebra mussel larvae and adults

Development of stress markers for the invader freshwater zebra mussel (Dreissena polymorpha) is of great interest for both conservation and biomonitoring purposes. Gene expression profiles of several putative or already established gene expression stress markers (Metallothionein, Superoxide dismutase, Catalase, Glutathione S transferase, Glutathione peroxidase, Cytochrome c oxidase, the multixenobiotic resistance P-gp1, and heat shock proteins HSP70 and HSP90) were analyzed by quantitative Real-Time PCR in adults and pediveliger larvae after exposure to metals (Hg, Cu, Cd). A defined pattern of coordinated responses to metal exposure and, presumably, to oxidative stress was observed in gills and digestive gland from adults. A similar, albeit partial response was observed in larvae, indicating an early development of stress-related gene responses in zebra mussel. The tools developed in this study may be useful both for future control strategies and for the use of zebra mussel as sentinel species in water courses with stable populations.     

Oxygen-containing polycyclic aromatic hydrocarbons (OPAHs) in urban soils of Bratislava, Slovakia: patterns, relation to PAHs and vertical distribution

We determined concentrations, sources, and vertical distribution of OPAHs and PAHs in soils of Bratislava. The ∑14 OPAHs concentrations in surface soil horizons ranged 88-2692 ng g⁻¹ and those of ∑34 PAHs 842-244,870 ng g⁻¹. The concentrations of the ∑9 carbonyl-OPAHs (r = 0.92, p = 0.0001) and the ∑5 hydroxyl-OPAHs (r = 0.73, p = 0.01) correlated significantly with ∑34 PAHs concentrations indicating the close association of OPAHs with parent-PAHs. OPAHs were quantitatively dominated by 9-fluorenone, 9,10-anthraquinone, 1-indanone and benzo[a]anthracene-7,12-dione. At several sites, individual carbonyl-OPAHs had higher concentrations than parent PAHs. The concentration ratios of several OPAHs to their parent-PAHs and contribution of the more soluble OPAHs (1-indanone and 9-fluorenone) to ∑14 OPAHs concentrations increased with soil depth suggesting that OPAHs were faster vertically transported in the study soils by leaching than PAHs which was supported by the correlation of subsoil:surface soil ratios of OPAH concentrations at several sites with K_OW.     

Alternative immunofluorescent labeling of Cryptosporidium parvum in water samples using semiconductor quantum dots

The application of immunofluorescent labeling using quantum dots for detection of inactivated Cryptosporidium parvum oocysts in spiked water samples (reservoir water, treated wastewater effluent, permeate of a membrane bioreactor, and tap water) provided more consistent results compared with the organic fluorophores label. The varying degree of particles present in the different water samples (with turbidity ranging from 0.2 to 6.1 NTU) in nonconcentrated water samples had insignificant interference on the labeled counts (2-sample t-tests, p > 0.236) using the quantum dot label, while the quantum dot label provided an advantage of approximately 50% lower interference in concentrated water samples compared with the organic fluorophores label.