An air quality forecasting system in Beijing - Application to the study of dust storm events in China in May 2008

An air pollution forecast system, ARIA Regional, was implemented in 2007-2008 at the Beijing Municipality Environmental Monitoring Center, providing daily forecast of main pollutant concentrations. The chemistry-transport model CHIMERE was coupled with the dust emission model MB95 for restituting dust storm events in springtime so as to improve forecast results. Dust storm events were sporadic but could be extremely intense and then control air quality indexes close to the source areas but also far in the Beijing area. A dust episode having occurred at the end of May 2008 was analyzed in this article, and its impact of particulate matter on the Chinese air pollution index (API) was evaluated. Following our estimation, about 23 Tg of dust were emitted from source areas in Mongolia and in the Inner Mongolia of China, transporting towards southeast. This episode of dust storm influenced a large part of North China and East China, and also South Korea. The model result was then evaluated using satellite observations and in situ data. The simulated daily concentrations of total suspended particulate at 6:00 UTC had a similar spatial pattern with respect to OMI satellite aerosol index. Temporal evolution of dust plume was evaluated by comparing dust aerosol optical depth (AOD) calculated from the simulations with AOD derived from MODIS satellite products. Finally, the comparison of reported Chinese API in Beijing with API calculated from the simulation including dust emissions had showed the significant improvement of the model results taking into account mineral dust correctly.     

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.     

Simulations of the flow in the Mahakam river–lake–delta system,Indonesia

Large rivers often present a river–lake–delta system, with a wide range of temporal and spatial scales of the flow due to the combined effects of human activities and various natural factors, e.g., river discharge, tides, climatic variability, droughts, floods. Numerical models that allow for simulating the flow in these river–lake–delta systems are essential to study them and predict their evolution under the impact of various forcings. This is because they provide information that cannot be easily measured with sufficient temporal and spatial detail. In this study, we combine one-dimensional sectional-averaged (1D) and two-dimensional depth-averaged (2D) models, in the framework of the finite element model SLIM, to simulate the flow in the Mahakam river–lake–delta system (Indonesia). The 1D model representing the Mahakam River and four tributaries is coupled to the 2D unstructured mesh model implemented on the Mahakam Delta, the adjacent Makassar Strait, and three lakes in the central part of the river catchment. Using observations of water elevation at five stations, the bottom friction for river and tributaries, lakes, delta, and adjacent coastal zone is calibrated. Next, the model is validated using another period of observations of water elevation, flow velocity, and water discharge at various stations. Several criteria are implemented to assess the quality of the simulations, and a good agreement between simulations and observations is achieved in both calibration and validation stages. Different aspects of the flow, i.e., the division of water at two bifurcations in the delta, the effects of the lakes on the flow in the lower part of the system, the area of tidal propagation, are also quantified and discussed.     

Food sources used by sediment meiofauna in an intertidal Zostera noltii seagrass bed: a seasonal stable isotope study

In an intertidal Zostera noltii Hornem seagrass bed, food sources used by sediment meiofauna were determined seasonally by comparing stable isotope signatures (δ¹³C, δ¹⁵N) of sources with those of nematodes and copepods. Proportions of different carbon sources used by consumers were estimated using the SIAR mixing model on δ¹³C values. Contrary to δ¹⁵N values, food source mean δ¹³C values encompassed a large range, from −22.1 ‰ (suspended particulate organic matter) to −10.0 ‰ (Z. noltii roots). δ¹³C values of copepods (from −22.3 to −12.3 ‰) showed that they use many food sources (benthic and phytoplanktonic microalgae, Z. noltii matter). Nematode δ¹³C values ranged from −14.6 to −11.4 ‰, indicating a strong role of microphytobenthos and/or Z. noltii matter as carbon sources. The difference of food source uses between copepods and nematodes is discussed in light of source accessibility and availability.     

Levels of PCDDs, PCDFs and dioxin-like PCBs in raw cow's milk collected in France in 2006

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as polychlorinated biphenyls (PCBs) are widespread environmental contaminants. A French national survey was carried out in April 2006 to assess the concentrations of PCDD/Fs and dioxin-like PCBs (DL-PCBs) in raw cow's milk. A random sampling scheme stratified by region was applied to collect 239 raw milk samples from 93 plants belonging to 17 dairy companies. Compared to a previous survey led in 1998 analyzing half-skimmed drinking milk in France, the PCDD/Fs level was cut by half, with an average concentration of 0.33 pg toxic equivalent (TEQ)/g fat in 2006. The mean DL-PCBs concentration was 0.57 pg TEQ/g fat and subsequently the sum of PCDD/Fs and DL-PCBs was 0.90 pg/g fat, values below the thresholds defined by the European Union regulations.     

Temperature and water pressure head effects on the degradation of the diketonitrile metabolite of isoxaflutole in a loamy soil under two tillage systems

Laboratory studies were conducted to evaluate the effects of temperature and water pressure head on the degradation of the diketonitrile metabolite (DKN) of isoxaflutole during 84 d in samples collected in a loamy soil under conventional (CT) and conservation (MT) tillage systems. Soil temperature was the major factor controlling DKN degradation in the two tillage systems. The shortest half-lives (T_1/2) were measured in the seedbed samples under MT at 25 °C and −33 cm water pressure head. We found that mouldboard ploughing under CT was responsible for the spatial variability of herbicide degradation properties, whereas under MT herbicide degradation was associated to the vertical distribution of organic matter.     

Synthesis, characterization and chromatographic separation of tetrachlorobenzene-related compounds

Sulphoxide, sulphone and mercapturic acid derivatives of isomeric tetrachlorobenzene were synthesized. These compounds and isomers of tetrachlorophenol were characterized by spectroscopic and chromatographic methods.     

Combined UV-biological degradation of PAHs

The UV-photolysis of PAHs was tested in silicone oil and tetradecane. In most cases, the degradation of a pollutant provided within a mixture was lower than when provided alone due to competitive effects. With the exception of anthracene, the larger pollutants (4- and 5-rings) were always degraded first, proving that UV-treatment preferentially acts on large PAHs and thereby provides a good complement to microbial degradation. UV-photolysis was also found to be suitable for treatment of soil extract from contaminated soils. The feasibility of UV-biological treatment was demonstrated for the removal of a mixture of phenanthrene and pyrene in silicone oil. UV-irradiation of the silicone oil led to 83% pyrene removal but no phenanthrene photodegradation. Subsequent treatment of the oil in a two-phases partitioning bioreactor (TPPB) system inoculated with Pseudomonas sp. was followed by complete phenanthrene biodegradation but no further pyrene removal. Totally, the combined process allowed 92% removal of the PAH mixture. Further work should focus on characterizing the photoproducts formed and studying the influence of the solvent on the photodegradation process.