An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals

This study refers to two chemical leaching systems for the base and precious metals extraction from waste printed circuit boards (WPCBs); sulfuric acid with hydrogen peroxide have been used for the first group of metals, meantime thiourea with the ferric ion in sulfuric acid medium were employed for the second one. The cementation process with zinc, copper and iron metal powders was attempted for solutions purification. The effects of hydrogen peroxide volume in rapport with sulfuric acid concentration and temperature were evaluated for oxidative leaching process. 2 M H₂SO₄ (98% w/v), 5% H₂O_2, 25 °C, 1/10 S/L ratio and 200 rpm were founded as optimal conditions for Cu extraction. Thiourea acid leaching process, performed on the solid filtrate obtained after three oxidative leaching steps, was carried out with 20 g/L of CS(NH₂)₂, 6 g/L of Fe³⁺, 0.5 M H₂SO₄, The cross-leaching method was applied by reusing of thiourea liquid suspension and immersing 5 g/L of this reagent for each other experiment material of leaching. This procedure has lead to the doubling and, respectively, tripling, of gold and silver concentrations into solution. These results reveal a very efficient, promising and environmental friendly method for WPCBs processing.     

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation

Background, aim, and scope

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound.

Materials and methods

2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography–mass spectrometry (GC–MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration.

Results

The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers.

Discussion

We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of reaction times is thereby achieved. The results support the interpretation of previously published data and improve the understanding of the factors of direct degradation along different pathways.

Conclusions

Oxidative pathways for 2,4-D, 2,4-DCP, and phenol were proposed by a careful monitoring of the reactions and detection of intermediates by GC–MS.

Recommendations and perspectives

The understanding of the factors that affect chlorophenols degradation along different pathways may facilitate the optimization of the treatment. Type of energy source (US or MW), power, and frequency to be applied could be designed in function of the operative scenario (amount of pollutant in soil, water, or oils).     

Activated soil filters for removal of biocides from contaminated run-off and waste-waters

Building facades can be equipped with biocides to prevent formation of algal, fungal and bacterial films. Thus run-off waters may contain these highly active compounds. In this study, the removal of several groups of biocides from contaminated waters by means of an activated soil filter was studied.A technical scale activated vertical soil filter (biofilter) with different layers (peat, sand and gravel), was planted with reed (Phragmites australis) and used to study the removal rates and fate of hydrophilic to moderate hydrophobic (log K_ow 1.8-4.4) biocides and biocide metabolites such as: Terbutryn, Cybutryn (Irgarol® 1051), Descyclopropyl-Cybutryn (Cybutryn and Terbutryn metabolite), Isoproturon, Diuron, and its metabolite Diuron-desmonomethyl, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone and Iodocarbamate (Iodocarb). Three experiments were performed: the first one (36 d) under low flow conditions (61 L m⁻² d⁻¹) reached removal rates between 82% and 100%. The second one was performed to study high flow conditions: During this experiment, water was added as a pulse to the filter system with a hydraulic load of 255 L m⁻² within 5 min (retention time <1 h). During this experiment the removal rates of the compounds decreased drastically. For five compounds (Cybutryn, Descyclopropyl-Cybutryn, Diuron, Isoproturon, and Iodocarb) the removal dropped temporarily below 60%, while it was always above 70% for the others (Terbutryn, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone). However, this removal is a considerable improvement compared to direct discharge into surface waters or infiltration into soil without appropriate removal. In the last experiment the removal efficiencies of the different layers were studied. Though the peat layer was responsible for most of the removal, the sand and gravel layers also contributed significantly for some compounds. All compounds are rather removed by degradation than by sorption.     

Immunotoxic effects of environmental toxicants in fish �� how to assess them?

Numerous environmental chemicals, both long-known toxicants such as persistent organic pollutants as well as emerging contaminants such as pharmaceuticals, are known to modulate immune parameters of wildlife species, what can have adverse consequences for the fitness of individuals including their capability to resist pathogen infections. Despite frequent field observations of impaired immunocompetence and increased disease incidence in contaminant-exposed wildlife populations, the potential relevance of immunotoxic effects for the ecological impact of chemicals is rarely considered in ecotoxicological risk assessment. A limiting factor in the assessment of immunotoxic effects might be the complexity of the immune system what makes it difficult (1) to select appropriate exposure and effect parameters out of the many immune parameters which could be measured, and (2) to evaluate the significance of the selected parameters for the overall fitness and immunocompetence of the organism. Here, we present - on the example of teleost fishes - a brief discussion of how to assess chemical impact on the immune system using parameters at different levels of complexity and integration: immune mediators, humoral immune effectors, cellular immune defenses, macroscopical and microscopical responses of lymphoid tissues and organs, and host resistance to pathogens. Importantly, adverse effects of chemicals on immunocompetence may be detectable only after immune system activation, e.g., after pathogen challenge, but not in the resting immune system of non-infected fish. Current limitations to further development and implementation of immunotoxicity assays and parameters in ecotoxicological risk assessment are not primarily due to technological constraints, but are related from insufficient knowledge of (1) possible modes of action in the immune system, (2) the importance of intra- and inter-species immune system variability for the response against chemical stressors, and (3) deficits in conceptual and mechanistic assessment of combination effects of chemicals and pathogens.     

Distributions and sources of polycyclic aromatic hydrocarbons in surface sediments from the Cross River estuary,S.E. Niger Delta,Nigeria

Polycyclic aromatic hydrocarbon (PAH) analyses of surface sediments from the Cross River estuary by gas chromatography–mass spectrometry indicated natural diagenetically derived PAHs in the upper estuary, with minor and variable amounts of petrogenic and combustion-derived PAHs from human activities (lower estuary). The occurrence of significant amounts of perylene (average 23% of all PAHs) with the diagenetic natural PAHs in the middle estuary bordered by mangrove forests supports its origin from terrestrial organic matter. The natural PAHs represent the highest percentage (average 76%) of the total PAHs in this tropical environment. The traditional geochemical parameters, including the petrogenic PAHs, confirmed trace petroleum contamination in the estuary. Specific PAH ratios such as Fl/Py and Fl/(Fl+Py) also support this source contribution.     

Traits, not origin, explain impacts of plants on larval amphibians

Managing habitats for the benefit of native fauna is a priority for many government and private agencies. Often, these agencies view nonnative plants as a threat to wildlife habitat, and they seek to control or eradicate nonnative plant populations. However, little is known about how nonnative plant invasions impact native fauna, and it is unclear whether managing these plants actually improves habitat quality for resident animals. Here, we compared the impacts of native and nonnative wetland plants on three species of native larval amphibians; we also examined whether plant traits explain the observed impacts. Specifically, we measured plant litter quality (carbon : nitrogen : phosphorus ratios, and percentages of lignin and soluble phenolics) and biomass, along with a suite of environmental conditions known to affect larval amphibians (hydroperiod, temperature, dissolved oxygen, and pH). Hydroperiod and plant traits, notably soluble phenolics, litter C:N ratio, and litter N:P ratio, impacted the likelihood that animals metamorphosed, the number of animals that metamorphosed, and the length of larval period. As hydroperiod decreased, the likelihood that amphibians achieved metamorphosis and the percentage of tadpoles that successfully metamorphosed also decreased. Increases in soluble phenolics, litter N:P ratio, and litter C:N ratio decreased the likelihood that tadpoles achieved metamorphosis, decreased the percentage of tadpoles metamorphosing, decreased metamorph production (total metamorph biomass), and increased the length of larval period. Interestingly, we found no difference in metamorphosis rates and length of larval period between habitats dominated by native and nonnative plants. Our findings have important implications for habitat management. We suggest that to improve habitats for native fauna, managers should focus on assembling a plant community with desirable traits rather than focusing only on plant origin.