磁强化臭氧氧化生化处理二级出水的试验研究

在外加磁场作用下,采用臭氧氧化对青岛某污水处理厂生化处理二级出水进行了处理.考察了臭氧投加量、反应时间、磁场强度对处理效果的影响.经过多次试验得到的最佳运行参数为:臭氧投加量3.5 mg/L;反应时间10 min;磁场强度3 000Gs.外加磁场提高了臭氧氧化的效率,缩短了反应时间.     

用Ames试验检测水源水和自来水中的遗传毒性

用微伤寒沙门氏菌／哺乳动物微粒体酶系的Ａｍａｅｓ试验,研究了不同季节物水源水及管网自来水中的遗传毒性,以ＸＡＤ２树脂为吸附剂,以丙酮－甲醇的混合液为洗脱液,浓率水样中的有机物,并对部分阳性水样进行有机成分的定性分析。结果发现：１３个水样中有７个样品在淡需要代谢活化系统Ｓ９的情况下,可诱导鼠伤寒沙门氏菌碱基移码型菌株的回复突变;不同水样在不同季节不同的诱导作用;同时通过ＧＣ／ＭＳ方法分析,发现阳性水     

Micromorphology and chemistry of airborne particles in Brussels during agriculture working periods in surrounding region

The main objective of our research was to compare the airborne particle micromorphology and chemistry in the Brussels environment during agriculture working periods in the surrounding farming region. We used specific methods and instrumentation that are adapted to the climate peculiarities of the Brussels region, the period of investigations (12 months) and the proposed objectives. For the agricultural works we defined the following six periods: before sowing, sowing, after sowing, before harvest, harvest and after harvest. The results indicate a possible temporal correlation between agricultural work periods and airborne particle concentration, micromorphology and chemistry in the Brabant-Brussels region. For wheat and corn plant-growth periods, the average particle size, defined as the area obtained by a planar projection of the particulate, showed important variations in time. For sugar beet and endive, the average area size variations are less important. The roughness and sphericity parameters for the growth periods of the four different plants also showed significant differences. Many of the larger particulates (> 10 microm) are aggregates of even finer particles coated with many still finer ones. The airborne particle chemistry averages (atomic percentage At%), showed that three constituents (Si, S and Fe) dominate all the samples (except for particles 3-10 microm in size, which contain a relatively large percentage of Al). Applying similar investigation methods to study the correlations between airborne particle dynamics in urban zones and the agriculture working periods in their surrounding regions could be of interest to better understand the complexity of the PM problematic.     

Calculating losses of crops in Denmark caused by high ozone levels

In order to help guide air pollution legislation at the European level, harmful air pollution effects on agriculture crops and the consequent economic implications for policy have been studied for more than a decade. Ozone has been labeled as the most serious of the damaging air pollutants to agriculture, where growth rates and consequently yields are dramatically reduced. Quantifying the effects has formed a key factor in policymaking. Based on the widely held view that AOT40 (Accumulated exposure Over Threshold of 40 ppb) is a good indicator of ozone-induced damage, the Danish Eulerian Model (DEM) was used to compute reduced agriculture yields on a 50 km×50 km grid over Europe. In one set of scenarios, a ten year meteorological time series was combined with realistic emission inventories. In another, various idealized emission reduction scenarios are applied to the same meteorological time series. The results show substantial inter-annual variability in economic losses, due in most part to meteorological conditions which varied much more substantially than the emissions during the same period. It is further shown that, taking all uncertainties into account, estimates of ozone-induced economic losses require that a long meteorological record is included in the analysis, for statistical significance to be improved to acceptable levels for use in policy analysis. In this study, calculations were made for Europe as a whole, though this paper presents results relevant for Denmark.     

A comprehensive method for aeolian particle granulometry and micromorphology analyses

The aim of this study was to use a new approach to investigate aeolian particle granulometry and micromorphology. Taking total aeolian deposition into account, we used parameters such as, particle area, perimeter, shape analysis for particle roughness (area/perimeter) and elongation (long/short axis). These parameters were analyzed on temporal and spatial scales at four study sites in the eastern Negev Desert, Israel. The total collection of particles was sorted into three size groups based on particle area to facilitate comparison. The classic definition of particle size (equating particle length with particle diameter) produced relatively small variations among the three size classes (25-38.6%). Our proposed comprehensive method demonstrated significant variation among the three size classes (13.9-60.8%), e.g. the classic method placed 36.4% of the particles in size class two while the new method placed 60.8% of the particles in this size class; the differences were even more significant regarding size class 3 (38.6% vs. 13.9%, respectively). The classic method did not facilitate investigation of particle roughness and elongation. With this new approach, it was possible to clearly define the particles by size class, based on these characteristics. With roughness, the variation among size classes 2 and 3 was about 27%. With elongation, the variation among size classes two and three was about 21%. Applying similar investigation method to study the aeolian particle granulometry and micromorphology can better facilitate more detailed calculation of particle size distribution, roughness and elongation.     

Risk assessment and distribution of soil Pb in Guangdong, China

In this study, the spatial distributions of soil lead (Pb) concentration in three horizontal soils in Guangdong, China, were surveyed and analyzed using geostatistics and geography information systems (GIS). Findings indicated that the Pb geometric mean concentration of 23.3 mg/kg in surface soils was found to be higher than those in global soils, which ranged from 2.3–235 mg/kg. In addition, the Pb geometric mean concentrations from A- to C-horizon were found to be 23.3, 27.2, and 28.6 mg/kg, respectively. The classification of a soil Pb environmental risk in an area was likewise presented based on the different levels of environmental quality of Pb and was done by GIS technology. Accordingly, there is a higher local concentration of Pb in the surrounding areas of Guangzhou where there is higher population density and in the north of Guangdong, which is a historic mining area. The results obtained by the environmental risk assessment reveal that about 46% of total surveyed area was above the background value, that is, 2.7% of the total area was at risk of pollution.     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Hydrogeochemical data as a tool for exploration and mapping: a case study from part of Afikpo Basin southeastern Nigeria

Fourteen (14) characters from six (6) water samples collected from springs, ponds, and streams located in Lower Cretaceous sedimentary area of Afikpo Basin have been analyzed. These include pH, turbidity, conductivity, total dissolved solid, hardness, Fe²⁺, Ca²⁺, Mg²⁺, K⁺, NO₃ ^?, Cl^?, SO₄ ^2?, and Na⁺. These sediments, which are Turonian and Coniacian in age, are subdivided into two by a basic rock dyke. Results of the analyses show clearly that the Turonian sediments, intruded by dolerite, have net Fe²⁺, HCO₃ ^?, Ca²⁺, Mg²⁺, Mn²⁺, Cl^?, and SO₄ ^2? concentration while those from the younger Coniacian sediment have net higher amounts of K⁺, Na⁺, and Mn²⁺. The overriding mafic minerals in the basic intrusive rock possibly led to higher leaching into ground water system near it. On the other hand, the presence of feldsparthic to kaolinitic sands of the younger Coniacian units led to higher K⁺ and Na⁺ matter in the water from these zones. The formations dip away from the older sediments. Concentrations of these characters are within acceptable drinking water standards by World Health Organization but noticeable anomalous zones for Fe²⁺, Mg²⁺, and Ca²⁺ are zones of basic rock suites. Areas with greater Na⁺ and K⁺ are traceable to sandy units. It is thus concluded that more analysis of surface, subsurface, and pond water samples can be utilized for minerals search and geological mapping. At this stage, it forms a veritable reconnaissance tool.     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.     

The concentrations and distribution of polycyclic musks in a typical cosmetic plant

Polycyclic musks [cashmeran (DPMI), celestolide (ADBI), phantolide (AHMI), traseolide (ATII), tonalide (AHTN) and galaxolide (HHCB)] in the air, wastewater, sludge samples of a typical cosmetic plant were analyzed. DPMI, ADBI, HHCB and AHTN were found in all samples, and ATII was not found in any sample. HHCB and AHTN were the major components in all samples. The polycyclic musk concentrations were very high in the air of the cosmetic plant, and polycyclic musks were mostly contained in the gas phase at the percentage of 86.35-97.70%. Average polycyclic musk concentrations in effluent were high, and ranged from 0.62 to 32.06 microgl-1. The removal efficiency during the active sludge wastewater treatment was also high, resulting from the adsorption of those compounds into the sludge. So the polycyclic musk concentrations were very high in the primary sludge and second sludge, and ranged from 1.78 to 92.45 mgkg-1 (dry), and from 2.87 to 65.67 mgkg-1 (dry), respectively. Results suggested that the sludge needed to be further treated to make polycyclic musks less influence to the environment.