Lead content in new decorative paints in India

The paint industry in India is broadly classified into two categories: organized sector and unorganized sector. Multinational and big Indian companies form the organized sector, whereas the small- and medium-scale industries which produce paints for the local market form the unorganized sector. The present study was undertaken to determine the level of lead in decorative paints in India. A total of 148 paint samples sourced from four organized sector companies and six unorganized sector companies were analyzed for the total lead content. Results of this study reveal that 39 % of the total paints tested (n = 148) contain lead more than 300 ppm, the voluntary limit prescribed by Bureau of Indian Standards, BIS (IS 15489:2011), and 45 % of the tested paints contain lead more than 90 ppm, the US limit. Further analysis of the data indicates that only 5 % of the tested paints manufactured by organized sector companies contain lead more than 300 ppm (n = 91), whereas 93 % of the tested paints manufactured by unorganized sector companies contain lead more than 300 ppm (n = 57). Comparison with earlier reported data suggests that while organized sector companies are gradually abandoning the use of lead-based compounds in their paints, the unorganized sector companies are still adding lead-based compounds intentionally in their paints despite the potential health hazards associated with it. The maximum concentration of lead obtained was 80,350 ppm in one of the paints manufactured by an unorganized sector company. The presence of high concentration of lead in yellow and green color paints indicates that color can be a predictor of lead content in decorative paints.     

Natural deep eutectic solvent mediated pretreatment of rice straw: bioanalytical characterization of lignin extract and enzymatic hydrolysis of pretreated biomass residue

The present investigation demonstrated pretreatment of lignocellulosic biomass rice straw using natural deep eutectic solvents (NADESs), and separation of high-quality lignin and holocellulose in a single step. Qualitative analysis of the NADES extract showed that the extracted lignin was of high purity (>90 %), and quantitative analysis showed that nearly 60?±?5 % (w/w) of total lignin was separated from the lignocellulosic biomass. Addition of 5.0 % (v/v) water during pretreatment significantly enhanced the total lignin extraction, and nearly 22?±?3 % more lignin was released from the residual biomass into the NADES extract. X-ray diffraction studies of the untreated and pretreated rice straw biomass showed that the crystallinity index ratio was marginally decreased from 46.4 to 44.3 %, indicating subtle structural alterations in the crystalline and amorphous regions of the cellulosic fractions. Thermogravimetric analysis of the pretreated biomass residue revealed a slightly higher T _dcp (295 °C) compared to the T _dcp (285 °C) of untreated biomass. Among the tested NADES reagents, lactic acid/choline chloride at molar ratio of 5:1 extracted maximum lignin of 68?±?4 mg g^?1 from the rice straw biomass, and subsequent enzymatic hydrolysis of the residual holocellulose enriched biomass showed maximum reducing sugars of 333?±?11 mg g^?1 with a saccharification efficiency of 36.0?±?3.2 % in 24 h at 10 % solids loading.     

Energy pricing and groundwater use

The current policy of many state governments in India to supply cheap and subsidized power to farmers for irrigation pumping is being increasingly questioned by many environmentalists and agriculturalists. States where power tariffs for irrigation are subsidized and cheap have seen a fall in their groundwater tables which could threaten the long-term sustainability of irrigated agriculture in these areas. This paper presents the results of a survey, undertaken to understand the effect of energy pricing on groundwater tables. The paper argues that current energy pricing policies are at cross purposes to groundwater conservation. Equity effects of energy pricing for irrigation pumping is also discussed .     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

Biodegradable Poly(butylene succinate) and Poly(butylene adipate-co-terephthalate) Blends: Reactive Extrusion and Performance Evaluation

Two biodegradable polyesters, poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) were melt-compounded in a twin screw extruder to fabricate a novel PBS/PBAT blend. The compatibility of the blend was attributed to the transesterification reaction that was confirmed by Fourier transform infrared spectroscopy. The Gibbs free energy equation was applied to explain the miscibility of the resulting blend. Dynamic mechanical analysis of the blends exhibits an intermediate tanδ peak compared to the individual components which suggests that the blend achieved compatibility. One of the key findings is that the tensile strength of the optimized blend is higher than each of the blended partner. Rheological properties revealed a strong shear-thinning tendency of the blend by the addition of PBAT into PBS. The phase morphology of the blends was observed through scanning electron microscopy, which revealed that phase separation occurred in the blends. The spherulite growth in the blends was highly influenced by the crystallization temperature and composition. In addition, the presence of a dispersed amorphous phase was found to be a hindrance to the spherulite growth, which was confirmed by polarizing optical microscopy. Furthermore, the increased crystallization ability of PBAT in the blend systems gives the blend a balanced thermal resistance property.     

Nutrient dynamics and seasonal variation of phytoplankton assemblages in the coastal waters of southwest Bay of Bengal

In order to understand the phytoplankton community structure and its relationship with the environmental variables in the near shore waters of Kalpakkam, east coast of India, observations were carried out during 2008–2009. Phytoplankton population was comprised of 219 species, and the density was higher during the southwest monsoon (SWM) and inter-monsoon seasons than that of north east monsoon (NEM) season. The nutrient status on a temporal and spatial scale indicated the impact of point sources carrying anthropogenic runoff. Comparison of ambient nutrient ratios with the Redfield ratio (N/P/Si?=?16:1:16) showed a clear temporal variation in the factors that regulate the phytoplankton growth. SWM and inter-monsoon season was evident to have an acute N-limitation of algal growth (~76 %) whereas P-limitation was encountered during the NEM season (~75 %). Interestingly, a sizable population of cyanobacteria (Trichodesmium erythraeum) were noticed during NEM season when there was an exponential increase in nitrogen concentration, probably due to nitrogen fixation. No significant impact of temperature on phytoplankton proliferation was observed in situ during the study period.     

Utilization of Arachis hypogaea hull,an agricultural waste for the production of activated carbons to remove phenol from aqueous solutions

Arachis hypogaea hulls, an agricultural waste, were used to prepare activated carbon by chemical activation with zinc chloride under four different activation atmospheres. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. The maximum Brunquer-Emmett-Teller (BET) surface area and micropore volume of the activated carbon was found to be 418 m²/g and 0.28 cm³/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from aqueous solutions. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second-order, and Lagergren, and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. Solution pH has significant effect on adsorption and the maximum uptake of phenol was reported at pH 3.5.     

Renewable Resource-Based Biocomposites of Various Surface Treated Banana Fiber and Poly Lactic Acid: Characterization and Biodegradability

Eco-friendly completely biodegradable biocomposites have been fabricated using polylactic acid (PLA) and banana fiber (BF) employing melt blending technique followed by compression moulding. BF??s were surface treated by NaOH and various silanes viz. 3-aminopropyltriethoxysilane and bis-(3-triethoxy silyl propyl) tetrasulfane (Si69) to improve the compatibility of the fibers within the matrix polymer. Characterization studies have been suggested that a better fiber matrix interaction because of the newly added functionalities on the BF surface as a result of chemical treatments. In comparison with the untreated BF biocomposite, an increase of 136% in tensile strength and 57% in impact strength has been observed for Si69 treated BF biocomposite. DSC thermograms of surface treated BF biocomposites revealed an increase in glass transition and melting transition due to the more restricted macromolecular movement as a result of better matrix fiber interaction. The thermal stability in the biocomposites also increased in case of biocomposite made up of BF treated with Si69. Viscoelastic measurements using DMA confirmed an increase of storage modulus and low damping values for the same biocomposite. Biodegradation studies of the biocomposites have been investigated in Burkholderia cepacia medium through morphological and weight loss studies.     

Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under Natural Soil Burial,UV Radiation and Hydrolytic-Salt Water Circumstances

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance (¹HNMR) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹HNMR spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.