Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel

This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.     

Abundance pattern of wedge clam Donax cuneatus (L.) in different spatial scale in the vicinity of a coastal nuclear power plant

Impact of thermal discharge from a coastal power station (Madras Atomic Power Station, southeast coast of India) on the spatial variability of Donax cuneatus abundance was assessed to determine the impact boundary. Totally, 20 sites were selected both on south and north side in increasing spatial scale from mixing zone, 12 locations were selected toward south side at a distance from 0 (near mixing point) to 2,000 m and eight location were selected toward north from the effluent mixing zone. Mean water temperature along the coast ranged from 29.1 ±0.15°C to 31.2 ± 0.15°C. Total organic carbon content in the sediment ranged from 0.27% to 0.70%. D. cuneatus population on the swash zone was ranged between 1.3 ± 1.5 and 88.3 ± 9.6 m^???2. Meager population of wedge clam was observed up to 100 m (S100) south from mixing point and abundance gradually increased in different spatial scale. Comparatively high abundance was observed from S400 and reached maximum at S1000 (64.0 ± 3.6 m^???2). Similar pattern was observed on north side too but less abundance was observed only up to 80 m (N80). Maximum abundance was observed at control location C3-N500 (88.3 ± 9.6 m^???2). Forty meters on either side of discharge point was highly impacted, 80 to 100 m toward plume flow (south) was moderately impacted, and 80 m north of mixing point also witnessed moderate impact. After 100 m (N100), north was not affected by effluents, whereas between 100 and 400 m, south was influenced slightly. Multivariate clustering pattern on the environmental variables of all sampling locations and population trend of D. cuneatus at those stations showed similarity. Present investigation unambiguously showed that the abundance pattern of D. cuneatus on the sandy beach of east coast of Kalpakkam is not governed by single major factor but due to the result of multiple interacting factors. The population size of the wedge clam with reference to the effect of power plant effluents and other features of habitats of the beach ecosystem are also discussed.     

Sustainable Waste Management of Engineering Plastics Generated from E-Waste: A Critical Evaluation of Mechanical,Thermal and Morphological Properties

Journal of Polymers and the Environment - The major roadblock for recycling of waste electrical and electronic equipments (WEEE) depends on the viability of sorting process, which is a complex...     

Bio-concentration of chromium—an <Emphasis Type="Italic">in situ</Emphasis> phytoremediation study at South Kaliapani chromite mining area of Orissa,India

Mine waste water at South Kaliapani usually contains toxic levels of hexavalent Cr(VI). The present in situ study was conducted at South Kaliapani chromite mine area in Orissa state, India, to assess the phytoremediation ability of three plants, namely, rice (Oryza sativa L.), paragrass (Brachiaria mutica), and an aquatic weed (Eichhornia crassipes), in attenuating Cr(VI) from mine waste water and to correlate the bio-concentration factors (BCF) of Cr. Water hyacinth (E. crassipes) showed 24% to 54% reduction whereas paragrass (B. mutica) was able to reduce 18% to 33% of Cr(VI) from mine water. This reduction was studied over a period of 100 days of plant growth. The reduction was observed through a passage of a sum total of 2,000 sq. ft. cultivated plots and ponds separately. Reduction in Cr(VI) content in mine water varies with plant age as well as with the distance of passage. Cr accumulation and BCF values increased with high soil Cr levels as well as the age of plants. High BCF and transportation index (Ti) values, i.e., 10,924 and 32.09, respectively, were noted for water hyacinth. The Ti values indicated that the root-to-shoot translocation of Cr was very high after 100 days of growth. The total accumulation rate was maximum (8.29 mg Cr kg dry biomass^− 1 day ^− 1) in paragrass. The BCF values for roots were noted to be higher than those of leaves, stems, and grains of the 125-day-old plants. Hence, paragrass and water hyacinth may be used as tools of phytoremediation to combat the problem of in situ Cr contamination.     

Physico-chemical assessment of paper mill effluent and its heavy metal remediation using aquatic macrophytes—a case study at JK Paper mill, Rayagada, India

The present investigation aims to assess the phytoremediation potential of six aquatic macrophytes, viz. Eichhornia crassipes, Hydrilla verticillata, Jussiaea repens, Lemna minor, Pistia stratiotes and Trapa natans grown in paper mill effluent of JK Paper mill of Rayagada, Orissa, for remediation of heavy metals. The experiment was designed in pot culture experiments. Assessment of physico-chemical parameters of paper mill effluent showed significant decrease in pH, conductivity, total dissolved solids, total suspended solids, chlorine, sulphur, biological and chemical oxygen demand after growth of macrophytes for 20 days. Phytoremediation ability of these aquatic macrophytic species for copper (Cu) and mercury (Hg) was indicated by assessing the decrease in the levels of heavy metals from effluent water. Maximum reduction (66.5 %) in Hg content of untreated paper mill effluent was observed using L. minor followed by T. natans (64.8 %). L. minor showed highest reduction (71.4 %) of Cu content from effluent water followed by E. crassipes (63.6 %). Phytoextraction potential of L. minor was remarkable for Hg and Cu, and bioaccumulation was evident from bioconcentration factor values, i.e. 0.59 and 0.70, respectively. The present phytoremediation approach was considered more effective than conventional chemical treatment method for removing toxic contaminants from paper mill effluent.     

Spatio-temporal variation in physicochemical properties of coastal waters off Kalpakkam, southeast coast of India, during summer, pre-monsoon and post-monsoon period

Seasonal observations on water-quality parameters and chlorophyll-a in the coastal waters off Kalpakkam, southeast coast of India, was carried out covering an area of about 30 km(2) to find out the variations in physicochemical properties during a monsoonal cycle of the year. Most of the parameters exhibited a significant spatial and seasonal variation. It revealed that the coastal water was significantly influenced by freshwater input from the nearby backwaters during North-east monsoon and post-monsoon periods. A marginal increase in pH from coast towards offshore was noticed during the observation. Relatively low salinity values were observed during pre and post monsoon when compared to summer. Bottom water was found to be highly turbid during summer and pre-monsoon conditions when compared to surface. This could be attributed to the strong northerly wind and northward current prior to the onset of southwest monsoon. N, P and Si based nutrients are relatively high in their concentration in the bottom water. Nitrate was significantly high during post-monsoon and contributed greatly towards total nitrogen as evident from the statistical correlation. Ammonia concentration was relatively high in the bottom samples during all the seasons except on a few occasions during post-monsoon. In general, phosphate and total phosphorous values remained low and particularly so in the surface water. Higher silicate concentration was observed in the bottom water, and there was a reducing trend towards offshore. High chlorophyll-a values were observed during summer and surface water was found to have higher pigment concentrations as compared to the bottom. Results show that phosphate acts as the limiting factor for phytoplankton production particularly during post-monsoon period whereas; none of the nutrients were found to be limiting the phytoplankton growth during other seasons.     

Effect of calcium and magnesium on copper,cadmium, and some essential elements of Indian major carps Labeo rohita (Hamilton) and Catla catla (Hamilton) treated with copper and cadmium

The effect of calcium and magnesium either singly or in combination on accumulation of cadmium and copper in Labeo rohita (rohu) and Catla catla (catla) was investigated in this study under laboratory conditions. The investigation showed that copper accumulation in rohu exposed to 0.25 mg L^?1 of copper for 14 days reduced from 31.0 ± 0.4 mg kg^?1 at no calcium/magnesium treatment to 3.5 ± 0.2 and 2.2 ± 0.1 mg kg^?1, respectively, at 75 mg L^?1 calcium or magnesium treatment. The copper level in catla exposed to 0.20 mg L^?1 of copper for 14 days reduced from 5.7 ± 0.1 mg kg^?1 at no calcium/magnesium treatment to 3.4 ± 0.2 and 3.3 ± 0.1 mg kg^?1, respectively, at 300 mg L^?1 calcium or magnesium treatment. The cadmium accumulation in rohu exposed to 0.20 mg L^?1 of cadmium for 14 days reduced from 1.7 ± 0.1 mg kg^?1 at no magnesium treatment to 1.4 ± 0.1 mg kg^?1 at 120 mg L^?1 magnesium treatment. The cadmium accumulation in catla exposed to 0.20 mg L^?1 of cadmium for 14 days reduced from 0.8 ± 0.2 mg kg^?1 at no magnesium treatment to 0.6 ± 0.2 mg kg^?1 at 80 mg L^?1 magnesium treatment. Copper and cadmium treatments also reduced some essential microelements of rohu and catla. Both the fishes restored these elements at different levels of calcium and magnesium.     

IMPACTS OF AGRICULTURAL DRAINAGE WELL CLOSURE ON CROP PRODUCTION: A WATERSHED CASE STUDY1

ABSTRACT: Much of north-central Iowa is characterized by flat topography, shallow depressions, and poor natural surface drainage. Land drainage systems comprising of tile drains and agricultural drainage wells (ADWs) are used as outlets for subsurface drainage of cropland under corn and soybean production. Studies have shown that these drainage systems, mainly the ADWs, are potential routes for agricultural chemicals to underground aquifers. To protect the region's vital groundwater resource, researchers are evaluating alternative outlets ranging from complete closure of existing ADWs (and creation of wetlands) to continued use of ADWs and chemical management in a comprehensive policy framework. This paper presents the results of a study designed to provide government jurisdictions, farmers, and land managers information for assessing the impact of closing ADWs on crop production. The study couples a geographic information systems database for a 471-hectare watershed in Humboldt County, Iowa, with a groundwater flow model (MODFLOW) and an empirical crop yield loss model to predict long-term effects of complete closure of ADWs on crop production. The cropland areas inundated and the relative crop yield loss due to ADW closure are determined as a function of long-term climatic data. The results indicate that elimination of drainage outlets in the watershed could result in ponding of low-lying areas and poorly drained soils, making them unsuitable for crop production. Such wetness also decreases the efficiency of production in the no-ponding areas by isolating fields, and the crop yield loss can be reduced by an annual average of about 18 percent.     

Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World

Sustainability, industrial ecology, eco-efficiency, and green chemistry are guiding the development of the next generation of materials, products, and processes. Biodegradable plastics and bio-based polymer products based on annually renewable agricultural and biomass feedstock can form the basis for a portfolio of sustainable, eco-efficient products that can compete and capture markets currently dominated by products based exclusively on petroleum feedstock. Natural/Biofiber composites (Bio-Composites) are emerging as a viable alternative to glass fiber reinforced composites especially in automotive and building product applications. The combination of biofibers such as kenaf, hemp, flax, jute, henequen, pineapple leaf fiber, and sisal with polymer matrices from both nonrenewable and renewable resources to produce composite materials that are competitive with synthetic composites requires special attention, i.e., biofiber–matrix interface and novel processing. Natural fiber–reinforced polypropylene composites have attained commercial attraction in automotive industries. Natural fiber—polypropylene or natural fiber—polyester composites are not sufficiently eco-friendly because of the petroleum-based source and the nonbiodegradable nature of the polymer matrix. Using natural fibers with polymers based on renewable resources will allow many environmental issues to be solved. By embedding biofibers with renewable resource–based biopolymers such as cellulosic plastics; polylactides; starch plastics; polyhydroxyalkanoates (bacterial polyesters); and soy-based plastics, the so-called green bio-composites are continuously being developed.     

Effect of Sequential Mixing and Compounding Conditions on Cellulose Acetate/Layered Silicate Nanocomposites

Injection molded nanocomposites have been successfully fabricated from cellulose acetate (CA), eco-friendly triethyl citrate (TEC) plasticizer, and organically modified clay with and without maleic anhydride grafted cellulose acetate butyrate (CAB-g-MA) as a compatibilizer. The effects of processing conditions such as mixing methods, pre-plasticizing times, extruder retention times (RT) and addition of compatibilizer on the performance of these nanocomposites have been evaluated. The cellulosic plastic with CA/TEC (80/20 wt%) was used as the polymer matrix for nanocomposite fabrication. The morphologies of these nanocomposites were evaluated through X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies. The mechanical properties of the nanocomposites were measured and have been correlated with the XRD and TEM observations. From all of the sequential mixing methods used, powder–powder mixing leads to the most transparent nanocomposites. Cellulosic plastic-based nanocomposites obtained using increased pre-plasticizing times and RT showed better exfoliated structures. In the system containing compatibilizer, the minimum retention time required for obtaining almost completely exfoliated hybrid nanocomposites was shorter than in the system without compatibilizer.