Polychlorinated dibenzo p-dioxins and dibenzofurans emissions in a primary copper smelter in China

Metallurgical production is the largest polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) emission source in China. However, PCDD/F monitoring and research are rarely conducted on primary metallurgical production. In this study, a demonstration primary copper smelter in China was selected to investigate PCDD/F characteristics and control. Samples were collected from major PCDD/F release points in the smelter process (fly ashes and waste water sludge). Specific analysis of PCDD/F congeners was carried out using a high resolution gas chromatography/high resolution mass spectrometry method. The results showed that PCDD/Fs might be unintentionally produced in the primary copper smelter processes, with sample concentrations of 180–6110 pg/g dry wt; highly chlorinated PCDD/F homologues were predominant. The toxicity of all the samples was calculated to be 120 pg WHO TEQ/g, fly ashes from the refining process furnaces air pollution control device and sludge were hazardous waste with higher PCDD/F toxicity. Both precursor formation and de novo synthesis were found to contribute to PCDD/F formation in the smelter process. PCDD/F characteristics and formation were compared with reported secondary copper smelters. Life-cycle control of PCDD/F was proposed for retrofitting of this smelter and for similar plants in China's primary copper production sector, including control at the PCDD/F formation, removal and disposal stages.     

Preliminary Evaluation of the Use of Phosphogypsum for Reef Substrate. I. A Laboratory Study of Bioaccumulation of Radium and Six Heavy Metals in an Aquatic Food Chain

Phosphogypsum (PG), a solid by-product of phosphoric acid production, contains radionuclides and trace metals in concentrations which may pose a potential hazard to human health and the environment. to investigate the possibility of bioaccumulation of radium and six heavy metals over time when aquatic organisms experience both trophic and environmental exposure to PG, we designed a laboratory experiment representing three levels of an aquatic food chain. During the 135 day experiment, a meiobenthic copepod species (Amphiascoides atopus) was cultured in the presence of PG. the copepods were subsequently fed to grass shrimp (Palaemonetes vulgaris and P. pugio) which were in turn fed to gulf killifish (Fundulus grandis); both the grass shrimp and the killifish also experienced an environmental PG exposure. Other than elevated radium levels in the experimental grass shrimp, the experiment demonstrated little effect of environmental or trophic exposure to PG on microinvertebrates, macroinvertebrates, or fishes that could be attributed to PG. in all cases where increased concentrations were indicated within the experimental group, roughly equivalent increases in metal concentrations also occurred in the control group.     

Methodology for an urban ecological footprint to evaluate sustainable development in China

The ecological footprint (EF) is a method for measuring sustainable development through ecological impact. A methodology is presented for predicting urban ecological footprints. Urban energy use and natural resource consumption were analyzed to calculate an EF based on land type (arable, pasture, forest, fossil energy land, built-up area and water area) and consumption (food, housing, transportation, goods, services and waste). The result was then compared with the local ecological carrying capacity to develop criteria for sustainable ecological footprints. Case studies of four cities in China (Guangzhou, Ningbo, Suzhou and Yangzhou) illustrate the urban EF approach. The time series of EF in a case study of Guangzhou for 1991–2001 was analyzed and the consumption–land-use matrix of urban EF was established. The results show that the cities are ecologically unsustainable, with average ecological conflicts per capita of more than 2 ha. The urban EF method is useful to measure urban sustainable development and provides policy proposals for decision-making. However, the EF method still has limitations and weaknesses.     

Multi-index integrated assessment and analysis of town-sewage treatment priorities in China

Water quality is one of the most serious problems of environment and national sustainable development strategy now facing China. After hard work over the last several decades, urban-sewage treatment in China is now relatively well developed. It now affords mainly higher levels of sewage collection and treatment, as well as pollution-load control. The characteristic rapid urbanization now occurring in China is still increasing and developing dramatically, and involves large numbers of people. However, in towns, sewage treatment infrastructure is inadequate, and a high percentage of the sewage generated there is not effectively collected and treated. The sewage and pollution load of such towns have become the most important reason for environmental water problems in China. To understand the priorities of sewage treatment in such towns, and their spatial distribution in China, we conducted two nationwide investigations of water use and sewage discharge in towns. Based on the integrated analytic hierarchy process (AHP), assessment indices and a framework of town-sewage treatment priorities in China were constructed. Then, we assessed and analyzed the priorities of towns regarding three aspects of sewage treatment: environmental stress, economic capability, and infrastructure. The results showed that the southeast coastal areas and north China had higher demand for sewage treatment than other areas. The demand in eastern and western areas had obvious differences in spatial distribution, but had nearly no differences within those areas. The towns having the greatest demand for high-priority sewage treatment were concentrated in regions with high economic capability and intense water resource utilization.     

土著细菌对江汉平原浅层含水层沉积物中砷迁移的影响

对江汉平原水文地质调查发现,该地区地下水砷含量已远超国家饮用水标准。以沉积物培养的土著细菌混合液为生物材料,以江汉平原高砷含水层沉积物为研究对象,在实验室内模拟地下水系统,研究厌氧环境条件下,不同生物量土著细菌和pH值对沉积物中砷迁移转化的影响,以及土著细菌活动下砷在不同沉积物中的迁移转化。结果表明,不同生物量菌悬液都能促进沉积物中As的释放,增加总As和As(III)的浓度,但150mL处理组,在研究后期,总As和As(III)的浓度呈现减缓趋势;在初始生物量一定的条件下,沉积物中As含量越高,细菌活动下总As相对释出量就越低,而且As(III)占所释出总As的比值就越高,但两个高砷含量沉积物组的差异较小;在初始pH值为5、7和9的培养条件下,细菌都能加速砷的迁移,但pH值为5的处理组(简称pH5处理组)最弱,在前8天,pH9处理组较pH7处理组的低,随后超过pH7处理组。研究表明,土著细菌悬液能加速As从沉积物中释出,并且释出的As以As(III)为主;在耐受的弱碱性环境条件下,细菌对砷的迁移和转化随环境的pH值增加而增强。     

利用改进的SOS/umu方法检测水处理过程中污染物的遗传毒性效应

SOS/umu遗传毒性测试方法被广泛应用于化合物和复杂混合物遗传毒性的评价,但是目前已报道方法的实验周期长达17 h,给实验操作带来了不便,因此亟需对常规方法进行改进。建立了测试周期可小于8 h(2 h预培养,4.5 h暴露培养) 的SOS/umu快速测定方法之后,应用改进后的方法对5种典型遗传毒性物质, 4-硝基喹啉1-氧化物(4-NQO)、丝裂霉素C(MMC)、甲磺酸甲酯(MMS)、2-氨基蒽(2-AA)和苯并芘(BaP)进行测定,结果表明,改进后的SOS/umu方法对4-NQO、MMC、MMS、2-AA和BaP的检测限分别为0.013±0.0031、0.031±0.0028、229.18±60.51、2.29±1.22和1.28±0.0698 μmol·L^-1,优于或者相当于报道方法。采用经典方法和改进后的方法对全国两个地区6个环境水样的遗传毒性进行测定,结果表明,两种方法检测出的6个环境水样的遗传毒性强度无显著性差异。另外,将研究方法应用于北方某市甲乙两个水厂原水、出厂水和管网水的遗传毒性评价,结果表明,两个水厂的原水、出厂水和管网水均表现出一定的直接遗传毒性,对应的4-NQO当量浓度(TEQ4-NQO)在0.0012 μg·L^-1至0.0129 μg·L^-1之间;加入鼠肝微粒体酶系统(S9)后,仅有乙水厂的管网水检测出极其微弱的遗传毒性效应。以上研究结果表明,改进后的SOS/umu快速测定方法能够实现在短时间（8h）内完成环境化合物及环境样品的遗传毒性检测,为筛选和评价化合物和复杂环境样品的遗传毒性提供了更为快捷的手段。     

城市污水处理厂微生物气溶胶污染和粒径分布特征

城市污水处理厂微生物气溶胶的污染与控制逐渐成为人们关注的热点问题。为明确城市污水处理厂微生物气溶胶浓度和粒径分布特征,选择鄂尔多斯市某城市污水处理厂的格栅间、配水池、氧化沟、二沉池、污泥脱水间和厂区门口6个功能区为对象,对各功能区产生的异养细菌、真菌和放线菌气溶胶浓度分布、污染特性和微生物粒子粒径分布特性进行研究。结果表明,该污水处理厂不同功能区内异养细菌、真菌和放线菌的浓度分布存在显著性差异,其中二沉池和污泥脱水间产生的异养细菌和放线菌浓度均较高,真菌浓度较高的区域为厂门口和二沉池;根据相关微生物气溶胶污染评价标准,污泥脱水间逸散的异养细菌浓度均达到污染级,二沉池、氧化沟和厂门口逸散的异养细菌浓度达轻微污染级,格栅间和配水池未受污染,而真菌浓度在各个功能区均未受到污染;各功能区产生的异养细菌、真菌和放线菌粒子粒径分布无明显差异,异养细菌、真菌和放线菌粒子粒径分别集中在第1、4级,第3、4级和第1、2、3级,大体上均呈正态分布;各功能区均逸散出一定比例的可以直接吸入人体呼吸道的微生物粒子,可能对人体健康具有一定的潜在风险。研究结果可为城市污水处理厂运行过程中微生物气溶胶的污染控制提供科学依据。     

2012年上半年我国南方地区极端阴雨天气评价——以湖南省为例

基于湖南省97个地面气象观测站观测资料,根据所选定的阴雨天气评价指标,运用数理统计方法,对2012年上半年湖南省阴雨天气特征及强度进行分析评估,结果表明,阴雨天气阶段性特征显著,属隆冬至初春历史罕见的寡照低温多雨事件与初春至初夏的极端多雨寡照事件的组合。同时根据社会调查数据对阴雨天气的影响展开多方位分析,得出低温阴雨天气不仅对农业造成了重大影响,而且对水利、交通、建筑业等多行业和人们身体健康也有较大影响,以此提出了应对极端天气气候事件的对策建议。     

胶东站换相失败引起的银川东换流站扰动分析

针对2012年4月22日胶东站换相失败问题。通过对直流系统建模,并将换相失败过程的系统参数代入模型中进行了分析和计算,提出预防逆变站换相失败的措施。分析结果表明:逆变站发生换相失败故障,将导致银川东换流站直流电流增大,直流输电输送功率减少,并对整流侧交流系统产生干扰。     

Fluent软件在地表水源热泵系统温排水数值模拟中的运用

运用Fluent软件对重庆市嘉陵江化龙桥段瑞安新天地江水水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取Fluent中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温升面积和温度梯度。结果表明:在温排水流量为2.0×103 m3/h、温差为4℃的条件下,计算该水域沿水流方向温升超过1℃的最大影响距离为150.4 m,温升超过1℃的水域面积约为1 525 m2,为模拟江水面积的8.59%。选取1℃温升值作为温升带的边界控制值,并在热泵系统最大负荷工况下,根据W=Q×ΔT计算研究水域热环境容量为19.402 m3.℃/s,剩余热环境容量为17.736 m3.℃/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。