液化石油气轿车实际道路污染物排放特征

利用PEMS对国2技术LPG出租轿车和汽油轿车的实际道路排放进行测试,基于测试数据对LPG轿车排放特征进行解析,并与汽油轿车的排放因子进行对比分析.结果显示:速度和行驶模式对LPG轿车污染物排放影响明显;LPG轿车CO 2、CO、HC和NOx污染物的实测排放因子分别为(169.5±22.2)、(2.18±2.38)、(...     

表面铜螯合磁性二氧化硅固定化漆酶及其催化降解水中2，4-二氯酚

利用磁性二氧化硅表面接枝的聚丙烯酰胺络合Cu2＋离子,制备了表面铜螯合磁性SiO：材料,采用傅立叶红外光谱（FT．IR）,X射线衍射（XRD）对该磁性材料进行了表征,并通过配位作用固定化漆酶,考察了其对水中2,4-二氯酚（2,4-DCP）的催化降解效能及主要影响因素。结果表明,表面铜螯合磁性SiO：固定化漆酶对2,4-DCP具有较好的催化降解效能,利用8g／L固定化漆酶催化降解50mL初始浓度为24．25mg／L的2,4-DCP,反应12h2,4-DCP去除率达91％;当pH值在3．0～6．0范围内时,2,4-DCP的去除率随反应pH值的增加而升高;2,4-DCP初始浓度在14．39～257．6mg／L范围内时,反应12h,2,4-DCP的去除率均达85％以上;给酶量增加促进2,4-DCP的去除,但过多的给酶量导致单位质量固定化漆酶催化降解2,4-DCP的速率下降;水中硫酸根离子对固定化漆酶催化降解2,4-DCP具有明显的促进作用,而碳酸氢根离子明显抑制反应的进行。     

MBR工艺中溶解性有机物的分子量和EEM解析

采用凝胶过滤色谱(GFC)分子量测定技术和三维荧光(EEM)光谱技术,对平板膜-生物反应器工艺应用于餐饮废水和粪便污水处理的工程实例进行研究,对比分析2套工艺中的调节池水和出水的溶解性有机物(DOM)及污泥胞外聚合物(EPS)的性质变化.研究表明,餐饮废水处理过程的调节池水DOM中大分子(＞100 kDa)物质比例为6...     

Use of historical and contemporary distribution of mammals in China to inform conservation

A systematic understanding of dynamic animal extinction trajectories for different regions in a nation like China is critically important to developing practical conservation strategies. We explored historical and contemporary changes in terrestrial mammalian diversity to determine how diversity in each of the 5 regions in China has changed over time and to examine the conservation potential of these regions. We used records from databases on Pleistocene mammalian fossils and historical distribution records (1175–2020) for Primates (as a case study) to reconstruct evolutionary and historical distribution trajectories of the 11 orders of terrestrial mammals and to predict their prospective survival based on the national conservation strategy applied. The results indicated that since the Pleistocene, 4–5 mammalian orders have been lost in the northeast, 3 in central China, 2 along the coast, and 1 in the northwest. In the southwest, all 11 orders were maintained. Contemporarily, the coast and southwest had the highest and second-highest species densities. The southwest region and southeastern sections of the northwest region were the most historically and contemporarily diverse areas, which suggests that they should be the first priority for protected area (PA) designation. The central and coastal areas should be secondarily prioritized. In these 2 regions, conservation should focus on human coexistence with nature. Less attention should be paid to the PA in the northeast and western northwest because in these areas ecosystems are depauperate and the climate is harsh. Conservation in these areas should focus principally on avoiding further human encroachment on natural areas. Article impact statement: Historical and contemporary patterns of extinction can be a basis for mammalian conservation strategies.     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Anaerobic biodegradation of cellulosic material: Batch experiments and modelling based on isotopic data and focusing on aceticlastic and non-aceticlastic methanogenesis

Utilizing stable carbon isotope data to account for aceticlastic and non-aceticlastic pathways of methane generation, a model was created to describe laboratory batch anaerobic decomposition of cellulosic materials (office paper and cardboard). The total organic and inorganic carbon concentrations, methane production volume, and methane and CO₂ partial pressure values were used for the model calibration and validation. According to the fluorescent in situ hybridization observations, three groups of methanogens including strictly hydrogenotrophic methanogens, strictly aceticlastic methanogens (Methanosaeta sp.) and Methanosarcina sp., consuming both acetate and H₂/H₂CO₃ as well as acetate-oxidizing syntrophs, were considered. It was shown that temporary inhibition of aceticlastic methanogens by non-ionized volatile fatty acids or acidic pH was responsible for two-step methane production from office paper at 35 °C where during the first and second steps methane was generated mostly from H₂/H₂CO₃ and acetate, respectively. Water saturated and unsaturated cases were tested. According to the model, at the intermediate moisture (150%), much lower methane production occurred because of full-time inhibition of aceticlastic methanogens. At the lowest moisture, methane production was very low because most likely hydrolysis was seriously inhibited. Simulations showed that during cardboard and office paper biodegradation at 55 °C, non-aceticlastic syntrophic oxidation by acetate-oxidizing syntrophs and hydrogenotrophic methanogens were the dominant methanogenic pathways.     

Regulating the hydrolysis of organic wastes by micro-aeration and effluent recirculation

In this study, the effects of micro-aeration and liquid recirculation on the hydrolysis of vegetable and flower wastes during two-phase solid–liquid anaerobic digestion were assessed. To accomplish this, we evaluated the hydrolysis of five batches of waste that were treated under the following conditions: anaerobic, insufficient micro-aeration (aeration for 5 min every 24 h), and sufficient micro-aeration (aeration for 5 min every 12, 4 and 1 h). Hydrolysis was found to depend on the level of micro-aeration. Specifically, insufficient micro-aeration led to unstable and decreased performance. Conversely, sufficient micro-aeration promoted the hydrolysis of easily biodegradable carbohydrates and proteins, but the microbial activity was later impaired by liquid recirculation using methanogenic effluent. The hydrolysis efficiency under anaerobic conditions was comparable to the efficiency observed under sufficient micro-aeration, while the cumulative TOC of the anaerobic batch was 1.4–2.4 times higher than that of the micro-aerated batches. In addition, liquid recirculation did not have a negative effect on the development of microbial activity under anaerobic conditions, which resulted in the lignocelluloses having a higher hydrolysis efficiency.     

宁淮高速公路膨胀土边坡生态土壤稳定剂土质改性试验研究

介绍了STW型生态土壤稳定剂对宁淮高速公路边坡膨胀土的胀缩性、水稳性、强度、抗冲刷性等的改性试验研究,并结合现场试验,分析了STW型生态土壤稳定剂用于膨胀土边坡坡面防护的效果。试验结果表明:STW型生态土壤稳定剂改性膨胀土的胀缩性,随着稳定剂掺量的增大而减小;改性土的水稳性,随着稳定剂稀释浓度的增大而增强;同时,改性土的强度得到显著提高,抗冲刷性能得到明显增强,具有显著的防治水土流失、促进表层固化、提高坡面稳定的效果。