三峡库区(重庆-宜昌段)沉积物中钒的污染特征及生态风险评价

为全面了解三峡库区(重庆—宜昌段)干支流沉积物中钒的含量水平、空间分布、赋存形态、污染程度,在三峡库区采集水体沉积物样品67个,测定了沉积物中钒的含量及其化学赋存形态,并采用地积累指数法和潜在生态危害指数法进行分析和评价.结果表明:1三峡库区研究区范围内沉积物中钒的含量范围为89.4~175.2 mg·kg-1,平均值为123.7 mg·kg-1,略高于长江沉积物背景值;2库区沉积物中钒的空间分布特征主要呈现库区干流含量大于支流,干流下游沉积物中钒含量高于上游;3沉积物中钒含量的极值点出现在较发达县(区)附近,考虑其来源可能是人为源汇入;4库区沉积物中钒的赋存形态主要以残渣态为主,所占质量分数为80%~89%,并与总量呈现显著正相关关系;5沉积物中钒污染程度较小,潜在环境危害影响较弱.     

Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Submerged vegetation removal promotes shift of dominant phytoplankton functional groups in a eutrophic lake

Historical data indicate that the dominance of submerged plants in Dianchi Lake in the 1960 s was characterized by low algal density with dominance of non-toxic group J（Scenedesmus,Pediastrum,etc.）. The removal of submerged plants,which began in the 1970 s,resulted in the expansion of bloom-forming Microcystis（group M）. Laboratory experiments suggested that Microcystis aeruginosa was inclined to grow and develop at elevated temperatures. The growth of Scenedesmus obliquus was slower than that of co-cultivated M. aeruginosa in the absence of Ceratophyllum demersum,especially at higher temperatures. The existence of submerged plant C. demersum could inhibit the growth of the harmful algae M. aeruginosa and this inhibitory effect by C. demersum was enhanced with an increase in temperature. Instead,with C. demersum,the growth of S. obliquus was not inhibited,but the co-cultivated M. aeruginosa was eliminated in a short time. Combined with the historical data and laboratory experiments,it was indicated that the submerged plants might play important roles in the dominance of the non-toxic group J in the historical succession. Consequently,the introduction of the submerged plant such as C. demersum might alter the dominant phytoplankton functional groups from M to J and benefit the restoration of the eutrophic lake.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.     

浙江省污水污泥处理处置状况的调查

通过对丽水、宁波、衢州、诸暨等浙江省境内十几个地区的污水处理厂的调查发现:目前浙江省内的污水处理工艺中,A2/O、A/O、氧化沟三种工艺占了近50%的份额。而SBR因其方法特点正在受到越来越多的重视。在污泥处理工艺中,填埋占了最大的一部分,有近70%的污水处理厂将产生的污泥进行填埋处理。目前,污泥处理技术单一,需要继续探寻污泥的减量和资源化技术,为日益增多的污泥探寻出路。     

生活垃圾资源化有效利用性分析

本文对生活垃圾资源化处理进行分析,垃圾中重金属的存在直接影响其有效利用,不断强化人们的环保意识,将分拣垃圾落实到实际行动中,生活垃圾能够变废为宝。     

基于物理过程的矿区地下水污染风险评价

目前国内外所做的地下水污染风险评价的实例研究一般都是从地下水的脆弱性研究出发,并未过多地考虑特征污染物对污染后果的影响.脆弱性是环境对污染物的自然敏感性,而地下水污染评价中更应当体现出污染物在地下水中的迁移分布特性.为了完善地下水污染风险评价的理论和方法,以某尾矿区为例提出了基于物理过程的地下水污染风险评价方法,在污染发生之前,根据经济社会的敏感性条件和污染物将来可能的分布范围,事先划分各个污染风险等级在含水层空间上的分布范围,然后据此反推各个风险等级所对应的污染物源强,以此作为地下水污染风险评价等级的划分标准,通过对污染物在包气带和含水层中的运移进行数值模拟来评价尾矿区地下水的污染风险.结果表明,这种基于物理过程的地下水污染风险评价方法可以给出污染物浓度和风险水平在空间和时间上的分布规律,对于单个点状的污染场地来说,具有详尽的风险表征方式,优于以往基于含水层固有脆弱性指数法的风险评价方法,该方法适用于现有污染场地的风险评价、场地优化选址和为场地建设提供设计参数.     

自然光照对淹水条件下三峡库区消落带典型土壤磷释放影响

为研究淹水条件下光照对土-水界面磷释放的影响,以三峡库区消落带典型土壤为对象,通过室内自然光照试验,讨论了铁还原及有机质降解对磷释放的影响,分析光照对淹水土壤磷释放的影响机制.结果表明,光照对淹水土壤磷释放存在一定程度的抑制作用,光照作用下淹水紫色潮土上覆水体中TP浓度范围为0.018~0.033 mg·L-1,避光处理为0.02~0.057mg·L-1,灰棕紫泥光照下TP浓度范围为0.028~0.045 mg·L-1,避光处理为0.04~0.084 mg·L-1.光照引起淹水土壤中铁氧化物的变化可能是光照抑制磷释放的重要原因.光照导致土壤中铁氧化物饱和程度降低,铁还原和无定形铁生成受阻进一步加深了光照对磷释放的抑制影响.CO2和CH4反映淹水土壤有机质分解情况,光照降低有机碳的转化效率,加速土壤中无机电子受体的消耗,解释了光照作用下铁氧化物的变化.由此可见,光照对淹水土壤磷释放的抑制与淹水土壤中铁还原和有机质分解密切相关.