EDS analysis of Portland ash cement degradation in an aggressive environment

The behaviour of Portland cement with and without 30% fly ash addition in aggressive solutions was studied. This paper considers the sulphate corrosion of the hardened cement paste. The cement paste test samples were prepared, cured in water for 21 day and then exposed to the influence of aggressive environment (10% (NH₄SO₄ solution). The measurements of several properties were carried out and the results were analyzed.

The image of the surface composition and morphology of the cement paste test samples was made by scanning electron microscopy (SEM). Concentration gradient of sulphate ions in cement paste depth was obtained by energy‐dispersive analysis (EDS).     

Distribution of selected essential (Co, Cu, Fe, Mn, Mo, Se, and Zn) and nonessential (Cd, Pb) trace elements among protein fractions from hepatic cytosol of European chub (Squalius cephalus L.)

Association of selected essential (Co, Cu, Fe, Mn, Mo, Se, and Zn) and nonessential (Cd, Pb) trace elements with cytosolic proteins of different molecular masses was described for the liver of European chub (Squalius cephalus) from weakly contaminated Sutla River in Croatia. The principal aim was to establish basic trace element distributions among protein fractions characteristic for the fish living in the conditions of low metal exposure in the water. The fractionation of chub hepatic cytosols was carried out by size exclusion high performance liquid chromatography (SE-HPLC; Superdex? 200 10/300 GL column), and measurements were performed by high resolution inductively coupled plasma mass spectrometry (HR ICP-MS). Elution profiles of essential elements were mostly characterized by broad peaks covering wide range of molecular masses, as a sign of incorporation of essential elements in various proteins within hepatic cytosol. Exceptions were Cu and Fe, with elution profiles characterized by sharp, narrow peaks indicating their probable association with specific proteins, metallothionein (MT), and ferritin, respectively. The main feature of the elution profile of nonessential metal Cd was also single sharp, narrow peak, coinciding with MT elution time, and indicating almost complete Cd detoxification by MT under the conditions of weak metal exposure in the water (dissolved Cd concentration ≤0.3 μg L^?1). Contrary, nonessential metal Pb was observed to bind to wide spectrum of proteins, mostly of medium molecular masses (30–100 kDa), after exposure to dissolved Pb concentration of ~1 μg L^?1. The obtained information within this study presents the starting point for identification and characterization of specific metal/metalloid-binding proteins in chub hepatic cytosol, which could be further used as markers of metal/metalloid exposure or effect on fish.     

Accumulation of Mn and Pb in linden (Tilia platyphyllos Scop.) bark and wood

As an indicator of environmental pollution, we collected tree rings and bark of linden (Tilia platyphyllos Scop.) from four sampling locations in Serbia. Mn and Pb were determined with a spectrochemical method that has an argon-stabilized U-shaped DC arc with aerosol supply as excitation source. Increased concentrations of Mn in linden tree rings and bark were found at the Debeli Lug location, where the Mn transfer factors were largest. The availability of Mn in soil and tree rings was greatly influenced by pH. Since 1950, Mn level decreased more noticeably on acidic soils. Higher concentrations of Pb were found in linden tree rings and bark at the locations Fru?ka Gora and Zemun. Proximity of the road to Novi Sad at both sites may be a possible reason for this. The Pb transfer factor was highest at Fru?ka Gora. The ratio of bioavailable elements in soil for Mn and Pb were also calculated. Close correlations between Mn and Pb concentrations in linden tree rings and the ratio of bioavailable elements in soil were seen at all four locations.     

Active moss biomonitoring of trace elements with Sphagnum girgensohnii moss bags in relation to atmospheric bulk deposition in Belgrade, Serbia

Active biomonitoring with wet and dry moss bags was used to examine trace element atmospheric deposition in the urban area of Belgrade. The element accumulation capability of Sphagnum girgensohnii Russow was tested in relation to atmospheric bulk deposition. Moss bags were mounted for five 3-month periods (July 2005-October 2006) at three representative urban sites. For the same period monthly bulk atmospheric deposition samples were collected. The concentrations of Al, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, and Pb were determined by instrumental neutron activation analyses and atomic absorption spectrometry. Significant accumulation of most elements occurred in the exposed moss bags compared with the initial moss content. High correlations between the elements in moss and bulk deposits were found for V, Cu, As, and Ni. The enrichment factors of the elements for both types of monitor followed the same pattern at the corresponding sites.     

Wastewater reuse in Mediterranean semi-arid areas: The impact of discharges of tertiary treated sewage on the load of polar micro pollutants in the Llobregat river (NE Spain)

The presence of sewage-borne micro contaminants in environmental waters is directly related to the discharge of treated effluents from wastewater treatment plants (WWTP) and the flow rate of the receiving river waters. Mediterranean rivers, in particular, are characterized by important fluctuations in the flow rates and heavy pollution pressures resulting from extensive urban, industrial and agricultural activities. This translates into contamination levels in these rivers often higher than those in other larger European basins. The present work provides an overview of the occurrence of five groups of organic contaminants (131 compounds) namely pharmaceuticals, illicit drugs, polar pesticides, estrogens, alkylphenols and related ethoxylates in WWTP tertiary treatment effluents. Data gathered during a period of water reuse carried out in the lower stretch of the Llobregat river (NE Spain), in the surroundings of the town of Barcelona as a consequence of the severe drought that took place along the years 2007-2008 are presented as illustrative example. In general, measured concentrations of the target compounds were in the low to mid ng L⁻¹ range. The total concentration of each compound class downstream to the discharge point was similar or slightly higher than that found upstream. Regarding the loads calculated for each compound, the relative contribution from the river upstream and the tertiary effluent were highly compound depending with no apparent trend. However, estimation of the overall bulk loads for each compound class determined in the Llobregat river showed the following rank order: pharmaceuticals > alkylphenols > pesticides > illicit drugs ? estrogens.     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – I. Levels and variabilities

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study the spatial and temporal variabilities and to explore the significance of averaging effects inherent to 24 h-sampling. Measurement uncertainty was quantified on basis of three independent side-by-side samplers, deployed at one of the sites.PAH abundances in the urban and rural environments differed largely. Levels at the urban sites exceeded the levels at the rural site by >100%. The discrepancy was largely dominated by emission of 3–4 ring PAHs in the city, while 5–6 ring PAHs were more evenly distributed between city sites and the hill site. During the night a higher fraction of the semivolatile PAHs might have been stored in the soil or sorbed to surfaces. PAH patterns were undistinguishable across the three sites. However, concentrations of more particle-associated substances differed significantly between the urban sites than between one of the urban sites and the rural site (3σ uncertainty). Time-averaging (on a 24 h-basis) would have masked the significant inter-site differences of half of the substances which were found at different levels (on a 4 h-basis).     

Water-soluble main ions in precipitation over the southeastern Adriatic region: chemical composition and long-range transport

Background, aim and scope  

Precipitation samples collected from 1995 to 2000 at meteorological station in the eastern outskirts of Herceg Novi (Montenegro) were analysed on Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^–, SO₄ ^2–, NO₃ ^– and NH₄ ⁺. Four-day backward trajectory simulations were conducted during the precipitation period to investigate the regional transport of main ions and their deposition in the region of the southeastern Adriatic Sea. The air mass trajectories were classified into six trajectory categories by the origin and direction of their approach to Herceg Novi.     

Polyacetal Polyols for Polyurethanes

The synthesis of telechelic polyacetals with terminal hydroxyl groups (polyacetal polyols), by the reaction of triethylene glycol divinyl ether with dipropylene glycol in the presence of trimethylolpropane or other triols or diols as starters, in acidic catalysis, has been studied. The synthesized liquid polyacetal triols and polyacetal diols were characterized by hydroxyl number, viscosity, acidity, number average molecular weight (M_n), weight average molecular weight (M_w), molecular weight distribution (M_w/M_n), FT-IR spectra. The obtained polyacetals were transformed in cast elastomers by the reaction with the isocyanate Mondur CD (modified diphenyl methane diisocyanate) with properties very close to the elastic polyurethanes obtained by using conventional polyether triols, copolymers propylene oxide–ethylene oxide. The polyacetal polyols are suitable for the synthesis of elastic polyurethanes (polyurethane elastomers, flexible polyurethane foams). Polyacetals are well known biodegradable polymers. Therefore, the polyurethanes based on polyacetal polyols are expected to be biodegradable.     

Bioaccumulation of Metals in Fish of Salmonidae Family and the Impact on Fish Meat Quality

The study was aimed at determining the levels of metals in water samples and muscles of the fish caught in the Una River basin, located in the northwestern part of Bosnia and Herzegovina. For that purpose, three fish species: Brown Trout (Salmo trutta m. fario), Grayling (Thymallus thymallus) and Californian Trout (Salmo gairdneri), together with stem water samples, were analyzed for metal concentrations (Pb, Hg, Cd, As, Mn, Ni, Cu, Cr, Se, Co, Sn, Zn, Fe, Ca, P) during a 2-year period. The fish was captured using electric fishing, nets or fishing equipment. The capture was undertaken on three sites (the river source, the middle flow and the river mouth) of each of the five biggest rivers belonging to the Una River basin (Unac, Krušnica, Sana, Klokot, and Una). The concentrations of metals in each sample were determined via atomic absorption spectrophotometry. In the tested waters, the presence of Mn in concentrations higher than permitted (0.07 mg/l) had been detected. In the tested meat, the following average concentrations of metals (mg/kg) had been found: Pb (0.67), Cd (0.06), Mn (0.65), Ni (0.15), Cu (0.79), Cr (1.05), Se (0.03), Zn (8.92), Fe (5.40), Ca (14.68), and P (10.85). The correlation between Mn concentrations identified in the tested waters and those identified in the meat of Brown Trout was revealed to be statistically significant, which confirms that, over time, bioaccumulation of metals took place. Even though the results were not indicative of contamination, they strongly suggest that constant monitoring of the ecosystems in reference should be implemented.     

Selective removal of heavy metals from metal-bearing wastewater in a cascade line reactor

Goal, Scope and Background This paper is a part of the research work on ‘Integrated treatment of industrial wastes towards prevention of regional water resources contamination — INTREAT’ the project. It addresses the environmental pollution problems associated with solid and liquid waste/effluents produced by sulfide ore mining and metallurgical activities in the Copper Mining and Smelting Complex Bor (RTB-BOR), Serbia. However, since the minimum solubility for the different metals usually found in the polluted water occurs at different pH values and the hydroxide precipitates are amphoteric in nature, selective removal of mixed metals could be achieved as the multiple stage precipitation. For this reason, acid mine water had to be treated in multiple stages in a continuous precipitation system-cascade line reactor. Materials and Methods All experiments were performed using synthetic metal-bearing effluent with chemical a composition similar to the effluent from open pit, Copper Mining and Smelting Complex Bor (RTB-BOR). That effluent is characterized by low pH (1.78) due to the content of sulfuric acid and heavy metals, such as Cu, Fe, Ni, Mn, Zn with concentrations of 76.680, 26.130, 0.113, 11.490, 1.020 mg/dm³, respectively. The cascade line reactor is equipped with the following components: for feeding of effluents, for injection of the precipitation agent, for pH measurements and control, and for removal of the process gases. The precipitation agent was 1M NaOH. In each of the three reactors, a changing of pH and temperature was observed. In order to verify efficiency of heavy metals removal, chemical analyses of samples taken at different pH was done using AES-ICP. Results Consumption of NaOH in reactors was 370 cm³, 40 cm³ and 80 cm³, respectively. Total time of the experiment was 4 h including feeding of the first reactor. The time necessary to achieve the defined pH value was 25 min for the first reactor and 13 min for both second and third reactors. Taking into account the complete process in the cascade line reactor, the difference between maximum and minimum temperature was as low as 6°C. The quantity of solid residue in reactors respectively was 0.62 g, 2.05 g and 3.91 g. In the case of copper, minimum achieved concentration was 0.62 mg/dm³ at pH = 10.4. At pH = 4.50 content of iron has rapidly decreased to < 0.1 mg/dm³ and maintained constant at all higher pH values. That means that precipitation has already ended at pH=4.5 and maximum efficiency of iron removal was 99.53%. The concentration of manganese was minimum at pH value of 11.0. Minimum obtained concentration of Zn was 2.18 mg/dm³ at a pH value of 11. If pH value is higher than 11, Zn can be re-dissolved. The maximum efficiency of Ni removal reached 76.30% at a pH value of 10.4. Discussion Obtained results show that efficiency of copper, iron and manganese removal is very satisfactory (higher than 90%). The obtained efficiency of Zn and Ni removal is lower (72.30% and 76.31%, respectively). The treated effluent met discharge water standard according to The Council Directive 76/464/EEC on pollution caused by certain dangerous substances into the aquatic environment of the Community. Maximum changing of temperature during the whole process was 6°C. Conclusion This technology, which was based on inducing chemical precipitation of heavy metals is viable for selective removal of heavy metals from metal-bearing effluents in three reactor systems in a cascade line. Recommendations and Perspectives The worldwide increasing concern for the environment and guidelines regarding effluent discharge make their treatment necessary for safe discharge in water receivers. In the case where the effluents contain valuable metals, there is also an additional economic interest to recover these metals and to recycle them as secondary raw materials in different production routes. ESS-Submission Editor: PhD Hailong Wang, hailong.wang@ensisjv.com