The sensitivity of soil enzymes,microorganisms and spring wheat to soil contamination with carfentrazone-ethyl

Herbicides pose a significant threat to the natural environment, in particular in soils that are most exposed to plant protection agents. Prolonged herbicide use leads to changes in soil metabolism and decreases soil productive potential. In this study, the influence of carfentrazone-ethyl (CE) on the microbiological and biochemical properties of soil and the yield of Triticum aestivum L. was evaluated. Carfentrazone-ethyl was applied to sandy loam (pH_KCl – 7.0) in doses of 0.000, 0.264, 5.280, 10.56, 21.18, 42.24, 84.48 and 168.96 µg kg^?1 DM soil. Soil samples were subjected to microbiological and biochemical analyses on experimental days 30 and 60. Carfentrazone-ethyl disrupted the biological equilibrium in soil by decreasing the abundance and biodiversity of soil-dwelling microorganisms, the activity of soil enzymes, the values of the biochemical activity indicator and spring wheat yields. Carfentrazone-ethyl had the most adverse effects when applied in doses many fold higher than those recommended by the manufacturer. The toxic effects of CE were also determined by its soil retention time. Soil treated with CE was characterized by higher counts of oligotrophic bacteria, organotrophic bacteria, bacteria of the genus Azotobacter, actinomycetes and fungi on day 60, and spore-forming oligotrophic bacteria on day 30. The activity of dehydrogenases, urease, alkaline phosphatase and β-glucosidase was higher on day 30 than on day 60.     

Size-segregated trace elements in continental suburban aerosols: seasonal variation and estimation of local,regional, and remote emission sources

We have measured trace element contents in suburban aerosols from six size fractions in the range of PM_0.27–16 from a background station in Belgrade (Serbia). The distribution and concentration of elements were determined within each of the investigated Dp fractions with emphasis on the fine and coarse modes. Fine/coarse mode ratios of element can provide information regarding their anthropogenic or natural origin. Analysis of seasonal variations of element contents in fine and coarse mode show that Cd, Co, K, and V have higher concentrations in the fine mode during heating season, while Fe contents are lower. In the coarse mode, Cu and V have higher concentrations during the heating season, while Al, Fe, Mg, Mn, and Sb contents are lower. We also apply a distribution probability model (normal, log-normal, and three-parameter Weibull) as new approach to estimate the distances of emission sources that can contribute to pollutant contents in particulate matter of the investigated location.     

Spatio-temporal analysis of land use/land cover change and its effects on soil erosion (Case study in the Oplenac wine-producing area,Serbia)

In this paper, various spatial modelling techniques were applied to analyse changes in soil cover and their impact on soil erosion in the Oplenac wine-producing area in Serbia in the past (1985 and 2013) and in the future (with predictions for 2041). The Integrated Valuation of Ecosystem Services and Trade-offs Sediment Delivery Ratio (InVEST SDR) model and the Modules for Land Use Change Evaluation (MOLUSCE) model, integrated with methods of remote sensing, were successfully applied and were shown to be valid tools for predicting the impact of Land Use Land Cover (LULC) changes when estimating soil loss. The results revealed that the greatest impact of land use changes between 1985 and 2013 was on a reduction in areas under vineyards and an extension of meadow and pasturelands as an individual and social response to economic conditions during the research period. The forecast for 2041 reflected the trends observed in the previous period, with the greatest changes witnessing an increase in urban areas and a decrease in areas of arable land. It was also found that the effect of LULC changes on spatio-temporal patterns in the Oplenac wine-producing area did not have a major impact on soil loss, meaning this area, with its good agro-climatic characteristics, is suitable for the intensification of agricultural production.     

Management of hazardous medical waste in Croatia

This article provides a review of hazardous medical waste production and its management in Croatia. Even though Croatian regulations define all steps in the waste management chain, implementation of those steps is one of the country's greatest issues. Improper practice is evident from the point of waste production to final disposal. The biggest producers of hazardous medical waste are hospitals that do not implement existing legislation, due to the lack of education and funds. Information on quantities, type and flow of medical waste are inadequate, as is sanitary control. We propose an integrated approach to medical waste management based on a hierarchical structure from the point of generation to its disposal. Priority is given to the reduction of the amounts and potential for harm. Where this is not possible, management includes reduction by sorting and separating, pretreatment on site, safe transportation, final treatment and sanitary disposal. Preferred methods should be the least harmful for human health and the environment. Integrated medical waste management could greatly reduce quantities and consequently financial strains. Landfilling is the predominant route of disposal in Croatia, although the authors believe that incineration is the most appropriate method. In a country such as Croatia, a number of small incinerators would be the most economical solution.     

Uptake and biotransformation of arsenate in the lichen Hypogymnia physodes (L.) Nyl

The uptake and metabolism of arsenate, As(V), as a function of time and concentration were examined in the lichen Hypogymnia physodes (L.) Nyl. Lichen thalli were exposed to As(V) in the form of a solution. Exponential uptake of As(V) from 4 microg mL(-1) As(V) solution was accompanied by constant arsenite, As(III), excretion back into the solution. Arsenate taken up into the lichens from 0, 0.1, 1, 10 microg mL(-1) As(V) solutions was partially transformed into As(III), dimethylarsinic acid (DMA) and (mono)methylarsonic acid (MA). 48 h after exposure, the main arsenic compound in the lichens was DMA in 0.1, As(III) in 1 and As(V) in 10 microg mL(-1) treatment. The proportion of methylated arsenic compounds decreased with increasing arsenate concentration in the exposure solution. These results suggest that at least two types of As(V) detoxification exist in lichens; arsenite excretion and methylation.     

The Pollution Load by Nitrogen and Phosphorus IN the Jadro River

The objective of the investigations of the Jadro River, located in Croatia, was to estimate the nitrogen and phosphorus loads in the Jadro River spring and its streamflow by calculating the load in kg/day or tons/year and to compare this with the load for the maximum allowed concentrations (MAC) for drinking water (Official Bulletin, No 46/94) expressed in kg/day or tons/year.Daily pollution loads at the Jadro River spring for total N ranged from 0 to 304 kg, for NH₃-N from 0 to 38 kg, for NO₃-N from 0–1321 kg and for PO₄-P from 0–92 kg in the period from September 1993 to September 2003. When compared with MAC loads the results prove that the Jadro River spring is not polluted by nitrogen compounds and phosphorus.The average annual load for total N ranged from 10 to 33 t, for NH₃-N from 0.25 to 5.15 t, for NO₃-N from 40 to 190 t, and for PO₄-P from 0.3 to 11.5 t. The nitrogen compounds and phosphorus loads vary from one year to another without any constant decreasing or increasing trends. The annual average loads compared with the average annual MAC loads (especially for NH₃-N and PO₄-P) show that there were no threats of constant pollution of the spring.The loads for total N and PO₄-P along the Jadro River flow from the spring to the fishpond entrance were monitored over a five year period from September 1999 to September 2004. The results show no regularities. The highest annual total nitrogen load of 45 t was recorded at the entrance to the fishpond during the 2002/2003 period. The highest annual PO₄-P load of 10 t was measured at the Vidović Bridge during the 2003/2004 period; however, the concentrations of N and P did not exceed the MAC concentrations which are prescribed for drinking water.According to the investigation results of the daily and average annual loads compared with MAC loads for drinking water, it can be concluded that the Jadro River spring and its streamflow are not polluted by nitrogen and phosphorus.     

Utilization of municipal solid waste bottom ash and recycled aggregate in concrete

In the combustion process of municipal solid waste (MSW), bottom ash (BA) represents the major portion of the solid residue. Since BA is composed of oxides, especially SiO(2) and CaO, the feasibility of its application in concrete as a substitute for cement was tested. It was found that at the age of 28 days, the flexural and compressive strengths of the binder linearly decrease at the rate of 0.03 and 0.02 MPa per wt% of BA in the binder, respectively. According to the results it may be recommended to replace up to 15 wt% of cement by BA and to use such binder where a low strength of concrete elements is required. Furthermore, the aggregate used for low strength concrete need not be of a very good quality. Therefore, gravel aggregate was partially replaced by recycled aggregate (RA). Consistency measured by slump was significantly reduced (>50%) when BA or/and RA were introduced into the mixture. However, concrete density and compressive strength were not affected and were approximately 2300 kg/m(3) and approximately 40 MPa, respectively.     

The Quality of Water Resources in Dalmatia

The purpose of this study was to monitor and record the specific characteristics and properties of most of the important water resources in Dalmatia located in Southern Croatia for a period of 5 years (1998–2002) according to established standards for drinking water. The paper presents a detailed account of their chemical content, the classification and the concentration of salts. The bacteriological pollution levels are indicated by the total coliform bacterial levels (MPN coli/100 mL). The water characteristics are expressed by coefficients, which represent the ratios between water ingredients. The Ca/Mg eq ratio, SO₄/Cl eq ratio and K₁, K₂ for bicarbonate hardness were calculated. The hygienic characteristics of the water samples were expressed by the total coliform bacteria estimation (MPN coli/100 mL), the permanganate consumption (KMnO₄) and biological oxygen demand (BOD₅). Karst waters in Dalmatia are moderately hard, the SO₄/Cl ratio is 0.38–1.6, non-corrosive (K₁ lower than 0.2) and not significantly mineralised (< 500 mg/L minerals). Sulphate waters are generally hard, the SO₄/Cl ratio is higher than 1.6, K₁ is 0.2–0.65. Marine waters are quite hard or hard, particularly at the river estuaries, the SO₄/Cl ratio is lower than 0.38, and K₁ is higher than 0.65. The groundwater and springs in Dalmatia are less polluted than surface waters. A majority of these have a geometric average value of MPN coli < 150/100 mL of water observed in 24 of 42 locations studied. The highest bacteriological pollution was found in nine locations where MPN coli > 1000/100 mL and moderate pollution was found in nine locations where MPN coli is between 150 and 1000/100 mL of water. The physical and chemical parameters determined for the most sources in Dalmatia are safe below the international permissible limits.     

Performance optimisation of a passive sampler for monitoring hydrophobic organic pollutants in water

The performance of an integrative passive sampler that consists of a C18 Empore disk sorbent receiving phase fitted with low density polyethylene membrane was optimised for the measurement of time-weighted average concentrations of hydrophobic micropollutants in water. A substantial improvement of sampling characteristics including the rate of sampling and the sampling precision was achieved by decreasing the internal sampler resistance to mass transfer of hydrophobic organic chemicals. This was achieved by adding a small volume of n-octanol, a solvent with high permeability (solubility [times] diffusivity) for target analytes, to the interstial space between the receiving sorbent phase and the polyethylene diffusion-limiting membrane.