Aerostat-lofted instrument and sampling method for determination of emissions from open area sources

An aerostat-borne instrument and sampling method was developed to characterize air samples from area sources, such as emissions from open burning. The 10 kg battery-powered instrument system, termed “the Flyer”, is lofted with a helium-filled aerostat of 4 m nominal diameter and maneuvered by means of one or two tethers. The Flyer can be configured variously for continuous CO₂ monitoring, batch sampling of semi-volatile organic compounds (SVOCs), volatile organic compounds (VOCs), black carbon, metals, and PM by size. The samplers are controlled by a trigger circuit to avoid unnecessary dilution from background sampling when not within the source plume. The aerostat/Flyer method was demonstrated by sampling emissions from open burning (OB) and open detonation (OD) of military ordnance. A carbon balance approach was used to derive emission factors that showed excellent agreement with published values.     

Assessment of the environmental fate and effects of the PPARgamma receptor agonist, pioglitazone

The environmental fate and effects of pioglitazone prescribed for the treatment of type 2 diabetes were evaluated in an environmental risk assessment following the European Medicines Agency (EMA) "Guideline on the Environmental Risk Assessment of Medicinal Products for Human Use"; EMEA/CHMP/SWP/4447/00. A predicted environment concentration (PEC) for surface water was estimated at 0.023μgL(-1), (action limit of 0.01μgL(-1)) triggering a comprehensive battery of laboratory evaluations. Pioglitazone and its major metabolites were determined not to significantly adsorb to sewage solids, were not persistent in the aquatic environment, did not bioaccumulate and were non-toxic to aquatic organisms. Pioglitazone does not pose an unacceptable risk to groundwater supplies, with concentrations not anticipated to be a risk to aquatic organisms or human drinking water supplies. Pioglitazone does not pose a risk of secondary poisoning.     

Biofiltration kinetics of a gaseous aldehyde mixture using a synthetic matrix

Although aldehydes contribute to ozone and particulate matter formation, there has been little research on the biofiltration of these volatile organic compounds (VOCs), especially as mixtures. Biofiltration degradation kinetics of an aldehyde mixture containing hexanal, 2-methylbutanal (2-MB), and 3-methylbutanal (3-MB) was investigated using a bench-scale, synthetic, media-based biofilter. The adsorption capacity of the synthetic media for a model VOC, 3-methylbutanal, was 10 times that of compost. Periodic residence time distribution analysis (over the course of 1 yr) via a tracer study (84-99% recovery), indicated plug flow without channeling in the synthetic media and lack of compaction in the reactor. Simple first-order and zero-order kinetic models both equally fit the experimental data, yet analysis of the measured rate constants versus fractional conversion suggested an overall first-order model was more appropriate. Kinetic analysis indicated that hexanal had a significantly higher reaction rate (k = 0.09 +/- 0.005 1/sec; 23 +/- 1.3 ppmv) compared with the branched aldehydes (k = 0.04 +/- 0.0036 1/sec; 31 +/- 1.6 ppmv for 2-MB and 0.03 +/- 0.0051 1/sec; 22 +/- 1.3 ppmv for 3-MB). After 3 months of operation, all three compounds reached 100% removal (50 sec residence time, 18-46 ppmv inlet). Media samples withdrawn from the biofilter and observed under scanning electron microscopy analysis indicated microbial growth, suggesting removal of the aldehydes could be attributed to biodegradation.     

A Benefit‐Cost Analysis of Total Maximum Daily Load Implementation1

Abstract: Total Maximum Daily Load (TMDL) implementation generates benefits and costs from water quality improvements, which are rarely quantified. This analysis examines a TMDL written to address bacteria and aquatic‐life‐use impairments on Abrams and Opequon Creeks in Virginia. Benefits were estimated using a contingent valuation survey of local residents. Costs were based on the number and type of best management practices (BMPs) necessary to achieve TMDL pollution reduction goals. BMPs were quantified using watershed‐scale water quality simulation models (Generalized Watershed Loading Function and Hydrological Simulation Program‐FORTRAN). Based on our projections, the costs to achieve TMDL induced pollution reduction goals outweigh the estimated benefits. Benefit‐cost ratios ranged between 0.1 and 0.3.     

An exploration of the potential for re-distributed manufacturing to contribute to a sustainable,resilient city*

Abstract

Re-distributed manufacturing (RDM), broadly described as manufacturing done at a smaller-scale and locally, could be beneficial to business and urban society through creating jobs, reducing the environmental impacts of production, and improving resilience to future disturbances. Consideration of RDM within a city-region requires the consideration of a wide range of issues – societal, technical, economic and environmental. This paper presents the results of a study into the potential for RDM to contribute to a sustainable, resilient city in the face of a range of expected future disturbances on the city and on manufacturing sectors. The study took an integrated assessment approach which incorporated the development of a conceptual framework; a ‘strawman’ causal loop diagram which was reviewed by participants in a workshop; and a stock and flow system dynamics model that represents our understanding about the structure and behaviour of urban manufacturing. Several key themes emerged: similarities between RDM and traditional manufacturing, availability of physical space for RDM to be done, achieving urban resilience through RDM by enabling responsiveness to disturbances, changes in environmental impacts from production, additions or losses in jobs, the competitiveness of local manufacturing, and skills and innovation for RDM technologies. Further work is recommended.     

Mapping air quality zones for coastal urban centers

This study presents a new method that incorporates modern air dispersion models allowing local terrain and land–sea breeze effects to be considered along with political and natural boundaries for more accurate mapping of air quality zones (AQZs) for coastal urban centers. This method uses local coastal wind patterns and key urban air pollution sources in each zone to more accurately calculate air pollutant concentration statistics. The new approach distributes virtual air pollution sources within each small grid cell of an area of interest and analyzes a puff dispersion model for a full year’s worth of 1-hr prognostic weather data. The difference of wind patterns in coastal and inland areas creates significantly different skewness (S) and kurtosis (K) statistics for the annually averaged pollutant concentrations at ground level receptor points for each grid cell. Plotting the S-K data highlights grouping of sources predominantly impacted by coastal winds versus inland winds. The application of the new method is demonstrated through a case study for the nation of Kuwait by developing new AQZs to support local air management programs. The zone boundaries established by the S-K method were validated by comparing MM5 and WRF prognostic meteorological weather data used in the air dispersion modeling, a support vector machine classifier was trained to compare results with the graphical classification method, and final zones were compared with data collected from Earth observation satellites to confirm locations of high-exposure-risk areas. The resulting AQZs are more accurate and support efficient management strategies for air quality compliance targets effected by local coastal microclimates.

Implications: A novel method to determine air quality zones in coastal urban areas is introduced using skewness (S) and kurtosis (K) statistics calculated from grid concentrations results of air dispersion models. The method identifies land–sea breeze effects that can be used to manage local air quality in areas of similar microclimates.     

Riparian buffer strips as a multifunctional management tool in agricultural landscapes: introduction

Catchment riparian areas are considered key zones to target mitigation measures aimed at interrupting the movement of diffuse substances from agricultural land to surface waters. Hence, unfertilized buffer strips have become a widely studied and implemented "edge of field" mitigation measure assumed to provide an effective physical barrier against nitrogen (N), phosphorus (P), and sediment transfer. To ease the legislative process, these buffers are often narrow mandatory strips along streams and rivers, across different riparian soil water conditions, between bordering land uses of differing pollution burdens, and without prescribed buffer management. It would be easy to criticize such regulation for not providing the opportunity for riparian ecosystems to maximize their provision for a wider range of ecosystem goods and services. The scientific basis for judging the best course of action in designing and placing buffers to enhance their multifunctionality has slowly increased over the last five years. This collection of papers aims to add to this body of knowledge by giving examples of studies related to riparian buffer management and assessment throughout Europe. This introductory paper summarizes discussion sessions and 13 selected papers from a workshop held in Ballater, UK, highlighting research on riparian buffers brought together under the EU COST Action 869 knowledge exchange program. The themes addressed are (i) evidence of catchment- to national-scale effectiveness, (ii) ecological functioning linking terrestrial and aquatic habitats, (iii) modeling tools for assessment of effectiveness and costs, and (iv) process understanding enabling management and manipulation to enhance pollutant retention in buffers. The combined understanding led us to consider four principle key questions to challenge buffer strip research and policy.     

Dealing With Uncertainty When Assessing Fish Passage Through Culvert Road Crossings

Assessing the passage of aquatic organisms through culvert road crossings has become increasingly common in efforts to restore stream habitat. Several federal and state agencies and local stakeholders have adopted assessment approaches based on literature-derived criteria for culvert impassability. However, criteria differ and are typically specific to larger-bodied fishes. In an analysis to prioritize culverts for remediation to benefit imperiled, small-bodied fishes in the Upper Coosa River system in the southeastern United States, we assessed the sensitivity of prioritization to the use of differing but plausible criteria for culvert impassability. Using measurements at 256 road crossings, we assessed culvert impassability using four alternative criteria sets represented in Bayesian belief networks. Two criteria sets scored culverts as either passable or impassable based on alternative thresholds of culvert characteristics (outlet elevation, baseflow water velocity). Two additional criteria sets incorporated uncertainty concerning ability of small-bodied fishes to pass through culverts and estimated a probability of culvert impassability. To prioritize culverts for remediation, we combined estimated culvert impassability with culvert position in the stream network relative to other barriers to compute prospective gain in connected stream habitat for the target fish species. Although four culverts ranked highly for remediation regardless of which criteria were used to assess impassability, other culverts differed widely in priority depending on criteria. Our results emphasize the value of explicitly incorporating uncertainty into criteria underlying remediation decisions. Comparing outcomes among alternative, plausible criteria may also help to identify research most needed to narrow management uncertainty.     

Measurement of Hydrocarbon Emissions Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques

Sulfur hexafluoride (SF6) tracer was used in a series of the experiments to simulate emissions of benzene, toluene, ethyl-benzene, and xylenes (BTEX) from a refinery wastewater basin. The ratio of the measured tracer release to the ambient tracer concentration established a dilution factor which was then used to calculate the mass flux of BTEX from the wastewater basin using the ambient BTEX concentration data. Measured fluxes of BTEX varied from 7 g/min to 70 g/min.

The CHEMDAT7 air emissions model was then used to predict emissions for comparison with the emissions measured using the tracer flux simulation. CHEMDAT7 typically overpredicted total measured BTEX emissions by factors of twelve to seventeen. The degree of overprediction varied both by the individual compound and the module of CHEMDAT7 used to predict emission fluxes.