Supervisor expediency to employee expediency: The moderating role of leader–member exchange and the mediating role of employee unethical tolerance

We utilize social learning theory to test the role‐modeling effect of supervisor expediency (i.e., a supervisor's use of unethical practices to expedite work for self‐serving purposes). In particular, we examine the relationship between supervisor expediency and employee expediency, as moderated by leader–member exchange (LMX) and mediated by employee unethical tolerance. We predict that employees are more likely to model their supervisors' expedient behaviors when their relationship is characterized by high‐LMX (a high‐quality exchange relationship that is rich in socioemotional support). Furthermore, we argue that supervisor expediency, especially when LMX is high, influences employees' attitudes of unethical tolerance, which then affects employees' expedient behaviors. Across 2 multisource field studies and a third time‐lagged field study, we found general support for our theoretical predictions. Theoretical and practical implications are discussed.     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

工业烟气氨法-络合法同时脱硫脱硝

在脱硫脱硝喷淋装置上采用氨法-络合法处理工业烟气。考察了吸收液pH、Fe(Ⅱ)EDTA浓度、初始烟气浓度、液气比对烟气同时脱硫脱硝效果的影响。实验结果表明:吸收液的酸碱度通过影响Fe(Ⅱ)与EDTA的络合形式进而影响NO去除率;SO_2去除率主要受吸收液pH和初始SO_2质量浓度的影响;当吸收液pH大于8、吸收液Fe(Ⅱ)EDTA浓度大于0.100 mol/L、初始SO_2质量浓度小于1 500 mg/m3、初始NO质量浓度为1 200 mg/m3时,SO_2去除率均在95%以上,NO去除率为54%;当液气比由1 L/m3增大至4 L/m3时,有效脱硫时间和有效脱硝时间分别增长了7 min和4 min。     

水环境中石油类物质分析方法探讨

在详述了国内外石油类分析方法的基础上,对各方法的适用范围、优缺点及可比性进行了深入分析,阐述了各类方法存在的共性问题,指出按照石油类物质毒性大小分别定量分析的方法将是未来的发展趋势。     

The Use of Subbottom Profiling in Refining Dredge Cuts for a Large‐Scale Sediment Remediation Project

A number of different techniques were employed to locate the target dredge grade on a large‐scale Canadian sediment remediation project. These techniques included various coring events, Seabed Terminal Impact Newton Gradiometer (STING) testing, and geotechnical borings. Despite these techniques, the data set for interpolation of the dredge grade was widely spaced, and some of the investigations were not specifically intended to be used for defining the dredge grade. In order to reduce the risk of extra expenses from contractor claims resulting from differing sediment conditions, more precise planning was required. Due to the size of the area and the desired accuracy, subbottom profiling was identified as a potential tool to provide high‐density coverage across the site. As with any geophysical tool, ground truth data were required to verify and aid in interpretation. This article describes how subbottom profiling was used to refine the dredge grade for the target layer, the associated challenges related to signal loss in some areas, and how they were overcome. ©2017 Wiley Periodicals, Inc.     

Mercury flows in a zinc smelting facility in South Korea

To prepare for the international mercury convention, the characteristics of mercury emissions from a zinc smelting facility in South Korea have been reviewed and a material flow analysis (MFA) has been conducted in this research. As inputs into the mercury MFA study, zinc ores and sulfuric acid were examined, whereas wastewater sludge, effluence water, spent catalyst, and emissions from the casting and roasting processes were examined as outputs. Mercury concentrations extracted from end products like zinc ingots, cadmium ingots, and sulfuric acid were then analyzed. Our results showed that the wastewater sludge discharged from the zinc smelting process had a relatively higher concentration of mercury, indicating that the concentration of mercury was further enriched in the wastewater sludge. The wastes discharged through the zinc smelting process should be thoroughly controlled, as results of the MFA showed that approximately 89 % of the mercury contained in the original input was later found in the waste. According to this study, the higher the concentration of mercury within zinc ores at the input stage, the higher is the mercury concentration found in the wastewater sludge at the output stage.     

肠道微生物对土壤中铜、锌、锰生物可给性的影响

为了更全面、准确地评价土壤中金属元素对人体的健康风险,研究土壤中金属元素在结肠阶段的生物可给性具有重要意义。通过采集我国一些地区的6种土壤,利用in vitro方法(PBET和SHIME联用)研究土壤中Cu、Zn、Mn在胃、小肠、结肠阶段的生物可给性。研究显示,土壤中Cu、Zn、Mn在胃阶段的生物可给性分别为23.8%~63.0%、21.2%~64.4%、11.7%~35.6%;从胃阶段到小肠阶段,土壤中Cu的生物可给性提高了0.4%~14.4%,而土壤中Zn在小肠阶段的生物可给性降低了6.7%~38.7%。结肠阶段,土壤中Cu、Zn、Mn的生物可给性分别为2.4%~12.9%、5.7%~18.7%、6.2%~18.9%,与小肠阶段相比,分别降低了21.7%~56.9%、0.4%~36.8%、4.5%~19.1%。结果表明,在肠道微生物存在的情况下,土壤中Cu、Zn、Mn在结肠阶段有较低的人体健康风险。     

赤霉酸暴露对SD大鼠青春期发育的影响

赤霉酸是目前国内外使用极其广泛的一种植物生长调节剂,但是针对其发育毒性的数据依然较少。本文探讨了赤霉酸暴露对SD大鼠青春期发育的影响。参考国内外环境内分泌干扰物危害的评价方法,将144只初断乳SD大鼠按体重随机分为4组,分别为对照组和1、10、100 mg·kg-1bw剂量组,采用经口灌胃方式对雄鼠连续染毒28 d,雌鼠连续染毒21 d。暴露结束后检测大鼠的体重、食物利用率、雄鼠包皮分离时间/雌鼠阴道开口时间、血清生化指标、脏器系数及组织病理学的变化。研究结果表明,与对照组相比,仅10和100 mg·kg-1bw剂量组雄鼠的肌酐水平显著升高(P<0.01),100 mg·kg-1bw剂量组雌鼠谷丙转氨酶水平有显著升高(P<0.01)。而与对照组相比,所有剂量组均未观察到大鼠的体重、食物利用率、雄鼠包皮分离时间/雌鼠阴道开口时间、脏器系数等指标有显著性差异的改变(P>0.05),组织病理学结果亦显示大鼠重要器官无损害性改变。因此,在本试验给予的剂量范围内赤霉酸染毒不会对SD大鼠青春期发育产生显著影响。     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

垃圾渗滤液中典型内分泌干扰物质(EDCs)细胞毒性分析

垃圾渗滤液的人类健康风险评估日益受到人们重视,也成为研究热点。本文采用一种新型高级氧化技术UV-Fenton处理渗滤液,并用人体乳腺癌细胞(MCF-7)评估处理过程中渗滤液原液以及渗滤液中典型内分泌干扰物质(EDCs)的细胞毒性,对垃圾渗滤液中EDCs的细胞毒性和变化规律进行了研究。结果表明渗滤液中的邻苯二甲酸二丁酯(DBP)、双酚A(BPA)、壬基酚(NP)是产生细胞毒性的主要物质,其毒性大小为DBPBPANP。在同样的氧化降解过程中显示出不同毒性变化规律,通过GC-MS分析,结果显示UV-Fenton过程中产生了大量的中间产物,这也是引起毒性变化的主要原因。实验结果也说明垃圾渗滤液细胞毒性可以通过UV-Fenton过程有效去除。