Evaluation of bisphenol A levels in Nigerian thermal receipts and estimation of daily dermal exposure

Environmental Science and Pollution Research - Bisphenol A (BPA) is a high production volume chemical that has wide industrial applications, especially as a color developer in thermal papers. The...     

From laboratory simulation to scale-up and design of spray barriers mitigating toxic gaseous releases

Simulation of a process by means of physical models at a reduced scale is an essential tool in many application, allowing to perform a large number of experimental runs, so as to obtain a quantitative representation of the involved phenomena, at relatively low cost. Some difficulties can arise when the mathematical model derived from the simulation is applied to a real scale problem, in that the scaling of some empirical coefficients with the system size is not obvious at all. As fluid barrier scaling is a difficult task, still not deeply investigated in the scientific literature, the focus of this study is to translate knowledge from research on this topic into practice for industrial application. Following an extensive and accurate experimental work in wind tunnel, the main parameters determining the effectiveness of containment, absorption and dilution of chlorine releases were determined and a mathematical model is developed. In order to frame proper scale-up strategies, the most important result of this study rests on the explicit formulae giving, as a function of the aforesaid parameters, the single pass efficiency, the global absorption efficiency, and the toxic gas concentration downwind the barrier. In the far field, the gas concentration is practically determined only by the rate of atmospheric dispersion of the mass flow-rate of gas escaping the abatement. The absorption efficiencies are related to the drop size and to the mass transfer coefficients in the gas and liquid phases. The mean drop diameter plays an essential role in the absorption efficiency, since it simultaneously acts on air entrainment, interfacial surface and mass transfer coefficient in the gas phase. The evaluation of the mitigation effect for an industrial installation requires the scaling of the entrainment coefficient experimentally determined from wind tunnel testing. All the scaling criteria needed for adapting the proposed model to the design of a spray curtain suitable for the protection from a chlorine release, are amply discussed presenting some carefully designed simulations. Owing to its rather general structure, the model can be applied to different gaseous releases and/or absorbing solutions, provided that proper values of the parameters related with the chemical and physical absorption of the involved substances be theoretically or experimentally obtained in advance.     

Monitoring of pathogenic microorganisms contamination during heat drying process of sewage sludge

The sewage sludge from wastewater treatment plant is a potential source of infectious organism. The number and type of pathogens in sludge depends on various factors namely, the wastewater source, the type of treatment plant, and other environmental factors such as the biological medium offered by the sewage sludge. The principal sludge-borne diseases are presented followed by discussion on biological aspect of growth and occurrence. The overall objective of this work is to estimate kinetic reduction of pathogen population in sludge during different thermal-drying process including: the agitated conductive drying, drum drying, solar drying, and fry-drying. The temperature curves were reported from literature except frying data which were determined in experiment. In order to apply the temperature influence on pathogens population, kinetic parameters for the thermal inactivation (D, z-values) were chosen from literature. Values of concentrations of each pathogen were also extracted from scientific review of pathogens in bio-solids. This study conducted to resolve the survival kinetic of Hepatitis A viruses. The result showed that a concentration of 7 × 10⁴ cfu/100 ml initially present in the sewage sludge is significantly reduced during the heat drying processes except the solar plant. The sewage sludge is completely disinfected when heated for 20 min, 10 min, and 10 s, respectively, during the agitated conductive process, vacuum fry-drying, and drum drying process.     

Ozone and forests in South-Western Europe--What have we learned?

Monitoring of forest condition and ozone (O3) at 83 sites in France, Italy, Luxenbourg, Spain and Switzerland resulted in a number of findings in relation to the knowledge of O3 exposure (concentration and cumulative AOT40), feasibility of the assessment of stomatal O3 flux and relationships between O3 and crown defoliation of beech and visible symptoms on native vegetation. However, the project provides evidence of issues to be addressed within the current monitoring system (data quality, validation sites and response indicators) and indications as to how the monitoring of O3 risk in the context of an effect-oriented monitoring program can be improved.     

Ozone and forests in South-Western Europe

The paper provides basic information about background, objectives and structure of O3SWE (Ozone at the permanent monitoring plots in South-Western Europe), an international co-operative project aimed at evaluating O3 concentrations, cumulative exposure, uptake and effects on forest vegetation in four countries of South-Western Europe (France, Italy, Luxenbourg, Spain and Switzerland). The project covers a total of 83 permanent plots of the EU and UN/ECE intensive forest monitoring programme and span over three years of investigation (2000-2002). The O3SWE project aims to demonstrate how, using data collected routinely in an intensive forest monitoring network, O3 exposure, flux and effects can be assessed and exceedances critically evaluated.     

Monitoring of odor compounds produced by solid waste treatment plants with diffusive samplers

Nuisance caused by odors is one of the most important problems for waste management plants. To control an odor nuisance, it must first be quantified. The analytical difficulties in odor measurements are related to the high number of volatile components (belonging to several chemical classes), above all when the concentration is lower than the detection limit of the technique used for the measurement. In this work, 2-butanone, alpha-pinene, tetrachloroethylene, dimethyldisulfide, beta-pinene, limonene, phenol and benzoic acid are determined, because they are representative of some important classes of compounds with higher odor impact. The compounds are sampled with thermal desorbable radial diffusive samplers Radiello containing Tenax cartridges. The analytical repeatability and the complete thermal desorption of the cartridges were verified for each odor compound; the relative standard deviations for repeated samples and the recovery percentage were, respectively, less than 7% and about 97% for all compounds. The measurements of the linearity of sampling showed no systematic difference according to the collection period. The comparison between the odor threshold and the limit of detection demonstrated that this method is reliable for the recognition and quantification of odor compounds, allowing Public Administration to impose legal limits and the control agencies to verify them.     

Evaluating the efficacy of restoration plantings through DNA barcoding of frugivorous bird diets

Frugivores are critical components of restoration programs because they are seed dispersers. Thus, knowledge about bird–plant trophic relationships is essential in the evaluation of the efficacy of restoration processes. Traditionally, the diet of frugivores is characterized by microscopically identifying plant residues in droppings, which is time‐consuming, requires botanical knowledge, and cannot be used for fragments lacking detectable morphological characteristics (e.g., fragmented seeds and skins). We examined whether DNA barcoding can be used as a universal tool to rapidly characterize the diet of a frugivorous bird, Eurasian blackcap (Sylvia atricapilla). We used the DNA barcoding results to assess restoration efforts and monitor the diversity of potentially dispersed plants in a protected area in northern Italy. We collected 642 Eurasian Blackcap droppings at the restored site during the autumn migration over 3 years. Intact seeds and fragmented plant material were analyzed at 2 plastidial barcode loci (rbcL and trnH‐psbA), and the resulting plant identifications were validated by comparison with a reference molecular data set of local flora. At least 17 plant species, including 7 of the 11 newly transplanted taxa, were found. Our results demonstrate the potential for DNA barcoding to be used to monitor the effectiveness of restoration plantings and to obtain information about fruit consumption and dispersal of invasive or unexpected plant species. Such an approach provides valuable information that could be used to study local plant biodiversity and to survey its evolution over time.