From laboratory simulation to scale-up and design of spray barriers mitigating toxic gaseous releases

Simulation of a process by means of physical models at a reduced scale is an essential tool in many application, allowing to perform a large number of experimental runs, so as to obtain a quantitative representation of the involved phenomena, at relatively low cost. Some difficulties can arise when the mathematical model derived from the simulation is applied to a real scale problem, in that the scaling of some empirical coefficients with the system size is not obvious at all. As fluid barrier scaling is a difficult task, still not deeply investigated in the scientific literature, the focus of this study is to translate knowledge from research on this topic into practice for industrial application. Following an extensive and accurate experimental work in wind tunnel, the main parameters determining the effectiveness of containment, absorption and dilution of chlorine releases were determined and a mathematical model is developed. In order to frame proper scale-up strategies, the most important result of this study rests on the explicit formulae giving, as a function of the aforesaid parameters, the single pass efficiency, the global absorption efficiency, and the toxic gas concentration downwind the barrier. In the far field, the gas concentration is practically determined only by the rate of atmospheric dispersion of the mass flow-rate of gas escaping the abatement. The absorption efficiencies are related to the drop size and to the mass transfer coefficients in the gas and liquid phases. The mean drop diameter plays an essential role in the absorption efficiency, since it simultaneously acts on air entrainment, interfacial surface and mass transfer coefficient in the gas phase. The evaluation of the mitigation effect for an industrial installation requires the scaling of the entrainment coefficient experimentally determined from wind tunnel testing. All the scaling criteria needed for adapting the proposed model to the design of a spray curtain suitable for the protection from a chlorine release, are amply discussed presenting some carefully designed simulations. Owing to its rather general structure, the model can be applied to different gaseous releases and/or absorbing solutions, provided that proper values of the parameters related with the chemical and physical absorption of the involved substances be theoretically or experimentally obtained in advance.     

Monitoring of pathogenic microorganisms contamination during heat drying process of sewage sludge

The sewage sludge from wastewater treatment plant is a potential source of infectious organism. The number and type of pathogens in sludge depends on various factors namely, the wastewater source, the type of treatment plant, and other environmental factors such as the biological medium offered by the sewage sludge. The principal sludge-borne diseases are presented followed by discussion on biological aspect of growth and occurrence. The overall objective of this work is to estimate kinetic reduction of pathogen population in sludge during different thermal-drying process including: the agitated conductive drying, drum drying, solar drying, and fry-drying. The temperature curves were reported from literature except frying data which were determined in experiment. In order to apply the temperature influence on pathogens population, kinetic parameters for the thermal inactivation (D, z-values) were chosen from literature. Values of concentrations of each pathogen were also extracted from scientific review of pathogens in bio-solids. This study conducted to resolve the survival kinetic of Hepatitis A viruses. The result showed that a concentration of 7 × 10⁴ cfu/100 ml initially present in the sewage sludge is significantly reduced during the heat drying processes except the solar plant. The sewage sludge is completely disinfected when heated for 20 min, 10 min, and 10 s, respectively, during the agitated conductive process, vacuum fry-drying, and drum drying process.     

Monitoring of odor compounds produced by solid waste treatment plants with diffusive samplers

Nuisance caused by odors is one of the most important problems for waste management plants. To control an odor nuisance, it must first be quantified. The analytical difficulties in odor measurements are related to the high number of volatile components (belonging to several chemical classes), above all when the concentration is lower than the detection limit of the technique used for the measurement. In this work, 2-butanone, alpha-pinene, tetrachloroethylene, dimethyldisulfide, beta-pinene, limonene, phenol and benzoic acid are determined, because they are representative of some important classes of compounds with higher odor impact. The compounds are sampled with thermal desorbable radial diffusive samplers Radiello containing Tenax cartridges. The analytical repeatability and the complete thermal desorption of the cartridges were verified for each odor compound; the relative standard deviations for repeated samples and the recovery percentage were, respectively, less than 7% and about 97% for all compounds. The measurements of the linearity of sampling showed no systematic difference according to the collection period. The comparison between the odor threshold and the limit of detection demonstrated that this method is reliable for the recognition and quantification of odor compounds, allowing Public Administration to impose legal limits and the control agencies to verify them.     

Ozone and forests in South-Western Europe

The paper provides basic information about background, objectives and structure of O3SWE (Ozone at the permanent monitoring plots in South-Western Europe), an international co-operative project aimed at evaluating O3 concentrations, cumulative exposure, uptake and effects on forest vegetation in four countries of South-Western Europe (France, Italy, Luxenbourg, Spain and Switzerland). The project covers a total of 83 permanent plots of the EU and UN/ECE intensive forest monitoring programme and span over three years of investigation (2000-2002). The O3SWE project aims to demonstrate how, using data collected routinely in an intensive forest monitoring network, O3 exposure, flux and effects can be assessed and exceedances critically evaluated.     

Ozone and forests in South-Western Europe--What have we learned?

Monitoring of forest condition and ozone (O3) at 83 sites in France, Italy, Luxenbourg, Spain and Switzerland resulted in a number of findings in relation to the knowledge of O3 exposure (concentration and cumulative AOT40), feasibility of the assessment of stomatal O3 flux and relationships between O3 and crown defoliation of beech and visible symptoms on native vegetation. However, the project provides evidence of issues to be addressed within the current monitoring system (data quality, validation sites and response indicators) and indications as to how the monitoring of O3 risk in the context of an effect-oriented monitoring program can be improved.     

A new typology for Portuguese beaches: An exploratory study

Beaches are now the most popular tourist destination and increased demand in the past 40 years has led not only to beach congestion but also to a differentiation between urban (resorts, overcrowded and under huge pressure), to natural (less crowded beaches). This diversity needs to be further explored not only to characterize individual beaches in a precise way, but also to understand the distinctive characteristics responsible for options made by beach users. Some attempts have been made to create a universal beach typology but sparse research has been undertaken. The topic is of extreme importance for beach management, as most studies only take into consideration beach usage type and few consider the surrounding environment (landscape). This paper presents an exploratory work for Portuguese beaches which creates a new classification, according to usage and surrounding environment, based on several variables, measured and weighted. The results scale between zero and five and assess how a beach can be classified along an urban (0) to natural (5) spectrum. Variables studied include population density, number of hotels urban density, car park distance to the beach, etc. A pilot study applied to 100 beaches in the Lisbon Metropolitan Area, found that a densely populated region, can also contain beaches with natural characteristics.     

Two and three-dimensional shoreline behaviour at a MESO-MACROTIDAL barred beach

The present work investigates cross-shore shoreline migration as well as its alongshore variability (with deformation) on timescales of days to years using 6 years of time-averaged video images. The variability of the shoreline is estimated through empirical statistical methods with comprehensive reference to three scales of variability. At the meso-to macro-tidal barred Biscarrosse beach, shoreline responds in decreasing order at seasonal (winter/summer cycles, 52%), event (storms, 28%) and inter-annual scales. Whereas seasonal evolution is dominated by wave climate modulation, short-term evolution is influenced by tidal range and surf-zone sandbar characteristics. The influence of tide range and sandbars increases when timescale decreases. This is even more the case for the alongshore deformation of the shoreline which is dominated by short-term evolution. An EOF analysis reveals that the first mode of shoreline change time series is associated with cross-shore migration and explains 58% of the shoreline variability. The rest of the modes are associated to deformation which explain 42% of shoreline variability.     

Environmentally friendly system for the degradation of multipesticide residues in aqueous media by the Fenton’s reaction

A Fenton oxidation system employing zero-valent iron (whose source was swarf, a residue of metallurgical industries, in powder form) and hydrogen peroxide for the treatment of an aqueous solution with six pesticides was developed, and the effect of the iron metal content, pH, and hydrogen peroxide concentration was evaluated. The characterization of the aqueous solution resulted in: pH 5.6, 105 mg L^?1 of dissolved organic carbon, and 44.6 NTU turbidity. In addition, the characterization of the swarf by FAAS and ICP-MS showed 98.43?±?7.40 % of zero-valent iron. The removal was strongly affected by the content of iron metal, pH, and hydrogen peroxide concentration. The best degradation conditions were 2.0 g swarf, pH 2.0, and 5 mmol L^?1 H₂O₂. At the end of the treatment, the pesticide degradation ranged from 60 to 100 %, leading to 55 % mineralization. Besides, all hydrogen peroxide was consumed and the determination of total dissolved iron resulted in 2 mg L^?1. Thus, the advantages of this system are rapid degradation (up to 20 min), high-degradation rates, simple handling, and low cost.