Seasonal variation of the distribution of PCBs in sediments and biota in a PCB-contaminated estuary

To elucidate the effects of seasonal variation of precipitation on the distribution of polychlorinated biphenyls (PCBs) in estuarine sediments and benthic feeders, PCB concentrations of river surface sediments and mullet fish (Liza macrolepis) were investigated in the estuary of Er-Jen River near former PCB contamination sites before and after each wet season from 2002 to 2004. Analyses of grain size distribution and organic matter revealed that the pre-existing surface sediments were covered by and mixed with the soil particulates brought by surface runoff after each wet season. Obvious increment of PCB content and significantly elevated fraction (p < 0.005) of light PCBs of the river mouth’s sediments after each wet season indicated that the invading particles were rich in unweathered PCBs. PCBs previously buried in the surface soil of heavily contaminated sites were flushed into this estuary through surface runoff. The precipitation altered the PCB patterns in sediment organic matter, the dietary source of mullet, and consequently changed that of mullets accordingly, which all possessed significant greater fraction of light PCBs. In this study, it was demonstrated that seasonal summer precipitation affected the distribution of PCBs on surface sediments and the mullets of this estuary. PCB residuals retained in this region still pose potential threats to biota resided here.     

Assessment of control strategies for reducing volatile organic compound emissions from the polyvinyl chloride wallpaper production industry in Taiwan

This study attempts to assess the effectiveness of control strategies for reducing volatile organic compound (VOC) emission from the polyvinyl chloride (PVC) wallpaper production industry. In Taiwan, methyl ethyl ketone, TOL, and cyclohexanone have comprised the major content of solvents, accounting for approximately 113,000 t/yr to avoid excessive viscosity of plasticizer dioctyl phthalate (DOP) and to increase facility in working. Emissions of these VOCs from solvents have caused serious odor and worse air quality problems. In this study, 80 stacks in five factories were tested to evaluate emission characteristics at each VOC source. After examining the VOC concentrations in the flue gases and contents, the VOC emission rate before treatment and from fugitive sources was 93,000 and 800 t/yr, respectively. In this study, the semiwet electrostatic precipitator is recommended for use as cost-effective control equipment.     

Microwave process for volatile organic compound abatement

The CHA Corporation has completed the U.S. Air Force Phase II Small Business Innovation Research program to investigate the feasibility of using a novel microwave-based process for the removal and destruction of volatile organic compounds (VOCs) in effluents from noncombustion sources, such as paint booth ventilation streams. Removal of solvents by adsorption, followed by the regeneration of saturated granular activated carbon (GAC) by microwave energy, was achieved in a single fixed-bed reactor. Microwave regeneration of the fixed-bed-saturated carbon restored the original GAC adsorption capacity. After 20 adsorption/regeneration cycles, the adsorption capacity dropped from 13.5 g methyl ethyl ketone (MEK)/100 g GAC to 12.5 g MEK/100 g GAC. During microwave regeneration of the GAC fixed bed, the concentrated desorbed paint solvent was oxidized by passing the solvent mixture through a fixed bed of an oxidation catalyst mixed with silicon carbide in a microwave reactor. A 98% oxidation efficiency was consistently achieved from the oxidation of VOCs in the microwave catalytic reactor.     

Six interaction profiles for simple mixtures

The Agency for Toxic Substances and Disease Registry (ATSDR) has a program for chemical mixtures that encompasses research on chemical mixtures toxicity, health risk assessment, and development of innovative computational methods. ATSDR prepared a guidance document that instructs users on how to conduct health risk assessment on chemical mixtures (Guidance Manual for the Assessment of Joint Toxic Action of Chemical Mixtures). ATSDR also developed six interaction profiles for chemical mixtures. Two profiles were developed for persistent environmental chemicals that are often found in contaminated fish and also can be detected in human breast milk. The mixture included chlorinated dibenzo-p-dioxins, hexachlorobenzene, dichlorodiphenyl dichloroethane, methyl mercury, and polychlorinated biphenyls. Two profiles each were developed for mixtures of metals and mixtures of volatile organic chemicals (VOCs) that are frequently found at hazardous waste sites. The two metal profiles dealt with (a) lead, manganese, zinc, and copper; and (b) arsenic, cadmium, chromium, and lead; the two VOCs mixtures dealt with (a) 1,1,1-trichloroethane, 1,1-dichloroethane, trichloroethylene, and tetrachloroethylene; and (b) benzene, ethylbenzene, toluene, and xylenes (BTEX). Weight-of-evidence methodology was used to assess the joint toxic action for most of the mixtures. Physiologically based pharmacokinetic modeling was used for BTEX. In most cases, a target-organ toxicity dose modification of the hazard index approach is recommended for conducting exposure-based assessments of noncancer health hazards.     

Buffer zone widths for honeybees from ground and aerial spraying of insecticides

The relative field hazards of insecticides to honeybees have been estimated by considering intrinsic toxicity levels and field application rates. This approach is extended here to a consideration of buffer zones downwind of sprayed areas by estimating the distance at which bees would encounter an LD(50) dose from spray drift. 'LD(50) distances' are determined for both ground and aerial spraying of ground crops in Britain using published data on spray deposition under various weather conditions. For ground spraying at low wind speeds (< or =3 m s(-1)), this zone of risk is up to 5 m for the great majority of compounds. Aerial spraying in unstable atmospheric conditions appears to produce drift deposits of about the same order of magnitude as from ground spraying at wind speeds of about 4 m s(-1), with maximum LD(50) distances of < or =40 m for chlorpyrifos, fenitrothion and triazophos. For aerial spraying in stable atmospheric conditions these distances would be much greater. Pieris brassicae larvae are contrasted with honeybees in their relative sensitivities to insecticides and consequent LD(50) distances.     

Biofiltration of trimethylamine-containing waste gas by entrapped mixed microbial cells

The study provides novel attempt to use an aerobic biofiltration system containing entrapped mixed microbial cells (EMMC) for removal of (CH3)3N-dominant waste gases. In the study, heterotrophic microflora-immobilized cellulose was packed into an EMMC reactor to degrade (CH3)3N. Effects of (CH3)3N inlet concentrations in continuous mode of operation at various flow rates are indicated. The result indicated that the (CH3)3N removal efficiency is higher than 90% at inlet loading below 27.2 mgNh(-1) and retention time 5.3 min. In addition, the maximal mass loading to reach approximately 99% efficiency was 95.5 mgNh(-1) for trimethylamine treatment. This EMMC biofiltration system also showed higher tolerance to endure fluctuations in concentrations and flow rates and still maintained in stable performance for removal. Adaptability test in response to gradual shift up and down of inlet TMA loading indicated that lack of steady-state multiplicity and hysteresis guarantees the microbial communities more precisely adapted to continuous treatment for maintaining stability.     

Sulfur hexafluoride (SF6): global environmental effects and toxic byproduct formation

This work provides information concerning possible global environmental implications and personnel safety aspects that should be considered during the commercial uses of sulfur hexafluoride (SF6). SF6 is an anthropogenically produced compound, mainly used as a gaseous dielectric in gas insulated switchgear power installations. It is a potent greenhouse gas with a high global warming potential, and its concentration in the earth atmosphere is rapidly increasing. During its working cycle, SF6 decomposes under electrical stress, forming toxic byproducts that are a health threat for working personnel in the event of exposure. Several precautions are recommended to avoid personnel exposure to toxic byproducts: oxyfluoride levels or other byproduct concentrations in the operating gas matrix should be traced to predetermine the overall gas toxicity; contaminants should be systematically considered during maintenance, chamber evacuation and system opening process; small SF6 quantities leaking into air or stagnated pollutant concentrations in the operating field should be analyzed and compared to the threshold limit values and permissible exposure levels. New system design rules (i.e., hermetically sealed gas compartments, gas recycling or disposal in the field area) and different handling policies--both during maintenance and final disposal--now should be considered globally to provide for environmental and personnel safety.     

Catalytic decomposition of hydrogen peroxide and 4-chlorophenol in the presence of modified activated carbons

The objective of this research was to examine the heterogeneous catalytic decomposition of H(2)O(2) and 4-chlorophenol (4-CP) in the presence of activated carbons modified with chemical pretreatments. The decomposition of H(2)O(2) was suppressed significantly by the change of surface properties including the decreased pH(pzc) modified with oxidizing agent and the reduced active sites occupied by the adsorption of 4-CP. The apparent reaction rate of H(2)O(2) decomposition was dominated by the intrinsic reaction rates on the surface of activated carbon rather than the mass transfer rate of H(2)O(2) to the solid surface. By the detection of chloride ion in suspension, the reduction of 4-CP was not only attributed to the advanced adsorption but also the degradation of 4-CP. The catalytic activity toward 4-CP for the activated carbon followed the inverse sequence of the activity toward H(2)O(2), suggesting that acidic surface functional group could retard the H(2)O(2) loss and reduce the effect of surface scavenging resulting in the increase of the 4-CP degradation efficiency. Few effective radicals were expected to react with 4-CP for the strong effect of surface scavenging, which could explain why the degradation rate of 4-CP observed in this study was so slow and the dechlorination efficiency was independent of the 4-CP concentration in aqueous phase. Results show that the combination of H(2)O(2) and granular activated carbon (GAC) did increase the total removal of 4-CP than that by single GAC adsorption.     

Adaptive management in the U.S. National Wildlife Refuge System: science-management partnerships for conservation delivery

Adaptive management is an approach to recurrent decision making in which uncertainty about the decision is reduced over time through comparison of outcomes predicted by competing models against observed values of those outcomes. The National Wildlife Refuge System (NWRS) of the U.S. Fish and Wildlife Service is a large land management program charged with making natural resource management decisions, which often are made under considerable uncertainty, severe operational constraints, and conditions that limit ability to precisely carry out actions as intended. The NWRS presents outstanding opportunities for the application of adaptive management, but also difficult challenges. We describe two cooperative programs between the Fish and Wildlife Service and the U.S. Geological Survey to implement adaptive management at scales ranging from small, single refuge applications to large, multi-refuge, multi-region projects. Our experience to date suggests three important attributes common to successful implementation: a vigorous multi-partner collaboration, practical and informative decision framework components, and a sustained commitment to the process. Administrators in both agencies should consider these attributes when developing programs to promote the use and acceptance of adaptive management in the NWRS.     

A critical exploration of blood and environmental chromium concentration among oral cancer patients in an oral cancer prevalent area of Taiwan

The growing incidence of oral cancer (OC) in Taiwan has become a crucial public health concern. In particular, Changhua, a county in central Taiwan, carries persistently high OC incidence rate, with an alarmingly high male/female ratio of OC incidence. Previous epidemiological studies had found that the incidence is spatially correlated with the level of soil content to certain heavy metals in the central Taiwan area. Soil and the human body both intake environmental heavy metals, which can be absorbed through various ways. The soil metal concentration is an index of possible environmental exposure to heavy metal, and the blood metal concentration somewhat reflects the level of the exposure on the human body. Metallic carcinogen is likely to generate free radicals and play a role in many cancers, and many studies had reported that environmental exposure to heavy metals is an important risk factor for developing cancer. Studies on animals showed that chronic intake of chromium (Cr) could induce OC. This study aims to explore the association between the Cr concentration in the farm soil and in the blood of OC patients. We recruited 79 OC patients from Changhua County, with their lifestyle being adjusted in regression analysis. The results showed that the Cr concentration in the blood of OC patients is significantly higher than the background value, and is positively associated with the Cr concentration in the soil surrounding their residence (p-value < 0.023). Because Changhua County is only with moderate prevalence of the known OC habitual risk factors, an environmental factor related to heavy metal Cr exposure is suspected. Future investigations may verify the causal relation between Cr and OC.