中国居民饮用水镉暴露非致癌风险的年龄分层权重

饮水是人体镉(Cd)暴露的重要途径,为了定量表征中国居民饮用水镉暴露风险,通过文献调研收集我国3类主要饮用水类型的镉浓度数据.利用回归模型获得不同年龄段人群饮水暴露参数分布模式.基于概率方法评价不同水体和不同人群由于饮用水镉暴露造成的非致癌风险.结果发现,3种类型水体镉浓度存在显著差异.自来水、未处理的地下水和地表水源...     

Association between particulate matter air pollution and cardiovascular disease mortality in Lanzhou,China

Ambient particulate matter (PM) pollution has been linked to elevated mortality, especially from cardiovascular diseases. However, evidence on the effects of particulate matter pollution on cardiovascular mortality is still limited in Lanzhou, China. This research aimed to examine the associations of daily mean concentrations of ambient air pollutants (PM_2.5, PM_C, and PM₁₀) and cardiovascular mortality due to overall and cause-specific diseases in Lanzhou. Data representing daily cardiovascular mortality rates, meteorological factors (daily average temperature, daily average humidity, and atmospheric pressure), and air pollutants (PM_2.5, PM₁₀, SO₂, NO₂) were collected from January 1, 2014, to December 31, 2017, in Lanzhou. A quasi-Poisson regression model combined with a distributed lag non-linear model (DLNM) was used to estimate the associations. Stratified analyses were also performed by different cause-specific diseases, including cerebrovascular disease (CD), ischemic heart disease (IHD), heart rhythm disturbances (HRD), and heart failure (HF). The results showed that elevated concentration of PM_2.5, PM_C, and PM₁₀ had different effects on mortality of different cardiovascular diseases. Only cerebrovascular disease showed a significant positive association with elevated PM_2.5. Positive associations were identified between PM_C and daily mortality rates from total cardiovascular diseases, cerebrovascular diseases, and ischemic heart diseases. Besides, increased concentration of PM₁₀ was correlated with increased death of cerebrovascular diseases and ischemic heart diseases. For cerebrovascular disease, each 10 μg/m³ increase in PM_2.5 at lag4 was associated with increments of 1.22% (95% CI 0.11–2.35%). The largest significant effects for PM_C on cardiovascular diseases and ischemic heart diseases were both observed at lag0, and a 10 μg/m³ increment in concentration of PM_C was associated with 0.47% (95% CI 0.06–0.88%) and 0.85% (95% CI 0.18–1.52%) increases in cardiovascular mortality and ischemic heart diseases. In addition, it exhibited a lag effect on cerebrovascular mortality as well, which was most significant at lag6d, and an increase of 10 μg/m³ in PM_C was associated with a 0.76% (95% CI 0.16–1.37%) increase in cerebrovascular mortality. The estimates of percentage change in daily mortality rates per 10 μg/m³ increase in PM₁₀ were 0.52% (95% CI 0.05–1.02%) for cerebrovascular disease at lag6 and 0.53% (95% CI 0.01–1.05%) for ischemic heart disease at lag0, respectively. Our study suggests that elevated concentration of atmospheric PM (PM_2.5, PM_C, and PM₁₀) in Lanzhou is associated with increased mortality of cardiovascular diseases and that the health effect of elevated concentration of PM_2.5 is more significant than that of PM_C and PM₁₀.

     

Occurrence,fate, and transport of potentially toxic metals (PTMs) in an alkaline rhizosphere soil-plant (Maize,Zea mays L.) system: the role of Bacillus subtilis

Environmental Science and Pollution Research - Utilization of microbes is one of the most promising methods to remediate potentially toxic metals (PTMs) from soil. In this study, a systematic...     

Fe2(SO4)3对稻秆和猪粪混合厌氧发酵产气的影响

为了探究不同剂量Fe_2(SO_4)_3对混合厌氧发酵产气的影响,以猪粪和稻秆为发酵原料,添加初始剂量分别为0.5%、1%、3%、6%、9%(基于发酵原料总固体质量)的Fe_2(SO_4)_3,采用中温((35±1)℃)厌氧发酵,发酵周期为30 d。结果表明,添加3%Fe_2(SO_4)_3处理总产气量和产甲烷量最高,相比对照分别提高了32.01%和51.48%;而Fe_2(SO_4)_3添加量过高会抑制产气,6%、9%添加量处理的总产气量相比对照分别降低了10.50%、11.73%。其中,9%的Fe_2(SO_4)_3添加组出现了挥发性脂肪酸(VFA)累积和发酵液p H值偏低的现象。对产气组分分析发现,不同添加量的Fe_2(SO_4)_3对N_2等主要气体含量影响无明显差异,但硫酸根的引入提高了各试验组沼气中的H_2S含量。通过对沼渣的XRD分析发现,铁源的添加促进了纤维素的分解,并刺激了体系中的硫与多种重金属元素生成矿物沉淀。     

镇江市基于BOO模式构建岸边小型水质自动监测系统初探

根据对构建岸边小型水质自动监测系统的前期调研,从项目的具体建设、资金投入、后期运维、运作风险等角度多方面考虑,最终采用BOO模式构建岸边小型水质自动监测系统。通过将项目具体实施与传统方式构建岸边小型水质自动监测系统进行利弊比较,认为在当前国情下以BOO模式构建岸边小型水质自动监测系统利大于弊,对于政府和承包商是双赢的合作方式。     

泥磷液相催化氧化氮氧化物

采用磷化工行业的固体废物泥磷液相催化氧化氮氧化物。实验结果表明,该方法是可行且有效的。随着温度的升高,泥磷吸收液的脱硝效率提高,当温度达到泥磷熔点时脱硝效率最佳。泥磷吸收液的脱硝效率随固液比的增大而有所下降,而随着NO体积分数和气体流量的增大,泥磷吸收液的脱硝效率呈先升后降的趋势。各因素对脱硝率的影响大小顺序为：气体流量>反应温度>固液比>NO体积分数。在反应温度60 ℃、固液比1∶4、NO体积分数0.03%、气体流量0.3 L/min的最佳工艺条件下,反应160 min的平均脱硝率可达97.38%。     

Soil conservation practices and production efficiency of smallholder farms in Central China

The aim of this paper is to evaluate and analyze the impact of adoption of soil conservation practices (SCPs) on the technical efficiency of smallholder rice producers in Central China. We address self-selection bias and unobserved heterogeneity problems by estimating a switching regression model for the adoption decision function and separate stochastic production frontiers for SCP and Conventional farms while allowing for production inefficiency. SCP farms exhibit statistically higher average technical efficiency than Conventional farms. Education, extension services, membership in cooperatives, access to credit, and alternative income sources are positively and significantly associated with technical efficiency for both groups. Conventional farms display higher partial output elasticity for land, while only SCP farms show significant elasticity for capital.     

船用阀门常见故障类型及可靠性试验方法研究

船用阀门在实际使用当中存在各种各样的故障类型,本文对船用阀门的故障模式及故障原因进行了汇总,并结合实际使用情况给出了阀门主要故障类型。然后通过故障原因分析确认导致故障的主要应力来源,由此设计了一套用于考核船用阀门可靠性水平的试验方法,为该类产品进行可靠性考核提供参考。     

沈阳市大气中PM2.5来源解析研究

通过2015年在沈阳市采集PM2.5样品及源类样品,分析样品的质量浓度和化学组成,用化学质量平衡(CMB)模型对该市PM2.5来源进行解析。结果表明:沈阳市大气中PM2.5浓度时空变化特征明显;各主要源类对沈阳市PM2.5的分担率依次为煤烟尘(28.03%)、二次无机离子(22.63%)、机动车尾气尘(17.27%)、城市扬尘(13.28%)、建筑尘(5.94%)、土壤风沙尘(5.82%)、道路尘(3.04%)、生物质燃烧尘(2.74%)和冶金尘(1.25%)。燃煤和机动车的有效控制既能降低本类源的贡献,也能降低二次无机离子,体现了多源类综合治理原则。     

城市高温热浪调控机制模拟研究

在全球气候变暖和城市化加速发展的共同影响下,高温热浪事件频繁发生、日趋严重。为了分析屋顶亮化、城市绿化和地表增湿在调节城市热力环境、缓解城市高温灾害中的作用,本文选择了2013年8月的高温天气过程,利用耦合了城市冠层模式的WRF模拟系统,采用屋顶亮化、屋顶绿化和地表增湿3种不同的调控方案模拟分析其对城市热环境、湿度和近地面热量通量的影响,及其不同的降温效果和影响时段。研究发现:(1)3种调控方案通过改变城市地区的辐射过程或者能量平衡过程,降低白天尤其是正午时分的近地面气温,可有效的减缓夏季城市地区的高温热浪。(2)采用地表增湿方案,当城市街道表面含水层厚度从0mm增加到3mm时,潜热通量迅速增加,感热通量迅速减少,降温迅速。这说明在白天用较少水量多次对城市街道增湿,是一种显著降温的有效方法。