Full-scale blending treatment of fresh MSWI leachate with municipal wastewater in a wastewater treatment plant

Fresh leachate, generated in municipal solid waste incineration (MSWI) plants, contains various pollutants with extremely high strength organics, which usually requires expensive and complex treatment processes. This study investigated the feasibility of blending treatment of MSWI leachate with municipal wastewater. Fresh MSWI leachate was pretreated by coagulation–flocculation with FeCl₃ 2 g/L and CaO 25 g/L, plate-and-frame filter press, followed by ammonia stripping at pH above 12. After that, blending treatment was carried out in a full-scale municipal wastewater treatment plant (WWTP) for approximately 3 months. Different operational modes consisting of different pretreated leachate and methanol addition levels were tested, and their performances were evaluated. Results showed that throughout the experimental period, monitored parameters in the WWTP effluent, including COD (<60 mg/L), BOD₅ (<20 mg/L), ammonium (<8 mg/L), phosphorus (<1.5 mg/L) and heavy metals, generally complied with the Chinese sewage discharged standard. Under the experimental conditions, a certain amount of methanol was needed to fulfill TN removal. An estimation of the operation cost revealed that the expenditure of blending treatment was much lower than the total costs of respective treatment of MSWI leachate and municipal wastewater. The outcomes indicated that blending treatment could not only improve the treatability of the MSWI leachate, but also reduce the treatment cost of the two different wastewaters.     

Insight into metal binding properties of biochar-derived DOM using EEM-PARAFAC and differential absorption spectra combined with two-dimensional correlation spectroscopy

Environmental Science and Pollution Research - A large amount of biochar-derived dissolved organic matter (BDOM) will be released into the environment with biochars application into repairing...     

Nitrogen removal performance and bacterial communities in zeolite trickling filter under different influent C/N ratios

Environmental Science and Pollution Research - In this study, the degradation performance of nutrients in zeolite trickling filter (ZTF) with different influent C/N ratios and aeration conditions...     

Migration and transformation of heavy metals in hyperaccumulators during the thermal treatment: a review

Environmental Science and Pollution Research - The pollution of heavy metals (HMs) in the soil has become one of the important factors affecting the national environment and human health....     

Removal of SO2 from smelting flue gas by using copper tailings with MnSO4: factors optimization by response surface methodology

Environmental Science and Pollution Research - The abatement of SO2 and the utilization of copper tailings are identified as two attention-attracting environmental issues in the copper smelter. In...     

碳排放影响因子与碳足迹文献综述:基于研究方法视角

从研究方法的角度出发,对近年来国内外碳排放影响因子及碳足迹的相关研究进行文献综述。根据碳排放影响因子的研究方法—情景分析法、因素分解法中的指数分解法以及其他计量模型,介绍了国内外关于碳排放影响因子的研究现状,最后对方法进行归类和对比。根据碳足迹研究方法—投入产出法、生命周期评价法、IPCC法以及其他模型,分析了国内外关于碳足迹的研究进展。最后通过总结,对碳排放和碳足迹的未来研究方向进行了展望。     

不同pH下纳米铁镍颗粒对生物降解苯酚的影响

研究不同pH(8.0、6.0和3.0)下金属纳米颗粒(Fe和Fe/Ni)对纺锤芽孢杆菌(BFN)降解苯酚的影响.实验结果发现pH在8.0和6.0时投加2种金属纳米颗粒(Fe和Fe/Ni)对BFN降解苯酚有促进作用,其原因主要是纳米颗粒在水中持续腐蚀产生H2,为BFN降解苯酚提供电子,促进BFN的生长.但在pH=3.0时,只有BFN-纳米Fe耦合体系才使苯酚得到部分降解,主要是因为纳米Fe颗粒与水反应产生OH-,使pH值有所升高,更适宜BFN的生长,同时提供电子供体H2促进BFN对苯酚的利用.扫描电镜(SEM)和能谱分析(EDS)数据证实金属纳米颗粒(Fe和Fe/Ni)在反应后附着在微生物表面,但微生物的表面形态并未发生显著改变.因此,纳米金属颗粒虽然通过附着影响微生物的活性,但其在腐蚀过程中产生的H2将作为电子供体而被BFN所利用,综合作用的结果是有利于BFN的生长进而提高苯酚的降解速率.     

适用于中国燃煤电厂的汞监测及排放控制技术

随着GB 13223—2011《火电厂大气污染物排放标准》的颁布,汞排放问题正式列入了控制目标,这必将对燃煤电厂的环保设施提出新的更高的要求。在综述国外汞监测技术的前提下,总结脱硫脱硝污染物监测的经验,针对中国的具体情况分析了新形势下我国燃煤电厂汞监测技术的发展方向和关键技术的开发重点。同时分析了在最大化地利用燃煤电厂现有环保设施和设备的情况下,如何开发在今后一段时期内最适宜在我国广泛应用的汞排放控制技术,也对国内今后的政策发展进行了预测。