Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.     

胡敏酸改性膨润土钝化污染土壤Pb&Cd及机理

通过盆栽试验,探讨了胡敏酸改性膨润土对重金属铅、镉污染土壤的钝化效果及机理。结果表明,铅、镉污染土壤中施加胡敏酸改性膨润土能显著降低小白菜中Pb、Cd的含量,在添加Cd(3 mg/kg)/Pb(250 mg/kg)污染土壤和Cd(1 0 mg/kg)/Pb(5 00 mg/kg)污染土壤上小白菜地上部分Pb含量分别比对照降低19.08%和47.91%,Cd含量分别比对照降低9.79%和14.89%。土壤本身对添加的重金属Pb/Cd有一定的耐受力和自我净化能力,在添加重金属后,添加的Pb/Cd元素大部分直接转化为较为稳定的碳酸盐结合态和铁锰氧化结合态。相关性分析显示小白菜的鲜重与小白菜Pb/Cd含量极显著负相关,进一步说明胡敏酸改性膨润土是通过提高小白菜的生物量,从而降低Pb/Cd在小白菜中的含量。     

便携β射线法手工监测PM_(2.5)的可行性研究

提出利用自动射线原理结合重量法的简捷便携特点的便携射线仪手工监测PM2.5的思路,平行比对了便携射线法和手工重量法所测60组PM2.5浓度的监测结果,采用线性回归及T检验、F检验等理论分析了两者数据结果间的有效性和可比性。结果表明,便携式射线仪监测结果与重量法监测结果之间有效可比且得到了两者间的线性回归方程;此外进行了20组数据的实样验证,换算值和真值之间相对误差在8%以内,因而确定了便携射线仪手工监测PM2.5的可行性。     

扬州市区水环境质量现状及防治对策

通过对扬州市区境内河流和地下水的环境质量进行调查分析,结果表明：河流水质较好,城区污水都排入污水处理厂且处理厂正常运行,水质达标排放,主要的污染物是有机污染物;地下水达到水质标准,由于地质原因,主要污染指标为总硬度和总矿化度。但仍应加大污染防治力度,针对水环境现状和问题,采取有效措施,坚持深入开展环境宣传教育,依靠科技进步,科学防治环境污染,控制污染源,实行达标制度,提高人们自身环保意识,促进水资源的可持续利用。     

基于兵棋推演理论的城市危机应急管理体系设计

随着经济的发展、城市化进程的加快,城市危机的危害程度日益加剧。基于我国城市危机应急管理总存在的不足,提出将兵棋推演运用到城市危机应急管理中,结合兵棋推演技术、地理信息系统、现代计算机技术和信息技术。提出了一套城市危机应急管理体系框架,并讨论了该系统与城市公共安全体制的融合机制问题。该系统汇集中外危机处置案例,实现动态推演,弥补以往剧本式的应急演练的缺欠,为提高城市危机应急调度指挥的快速性、准确性和科学性,有效整合现有应急救援力量和资源提供了有效的辅助手段,为提升城市危机应急管理决策水平和综合能力提供参考。     

重金属抗性解磷细菌的磷溶解特性研究

从湖南省湘西州花垣县的铅锌矿表层土壤中,筛选出两株具有重金属抗性和解磷特性的细菌T PSB1和T PSB2.通过16S rRNA基因序列比对,分别鉴定为嗜麦芽寡养单胞菌(Stenotrophomonas maltophilia)和唐菖蒲伯克霍尔德菌(Burkholderia gladioli).T PSB1和T PSB2在含有难溶性无机磷液体培养基中,其上清液的可溶性磷含量最高分别达到了402.9 mg·L-1和589.9 mg·L-1;在难溶性有机磷固体和液体培养基中,固体平板上均出现解磷圈,而液体培养基上清液中,可溶性磷含量也分别达到了2.97 mg·L-1和4.69 mg·L-1.另外,两株细菌对重金属Zn2+的抗性最高,在其浓度为2000 mg·L-1固体和液体培养基条件下均可以生长,磷溶解浓度分别为114.8 mg·L-1和125.1 mg·L-1.而在含铬和铅的浓度为1 000 mg·L-1的液体培养基中,两株细菌同样表现出重金属抗性.在Pb2+浓度为1000 mg·L-1的液体培养基中,磷溶解浓度分别达到了57.9 mg·L-1和71.7 mg·L-1;而在Cr2+浓度为1000 mg·L-1的培养基中磷溶解浓度分别为60.1 mg·L-1和98.4 mg·L-1.     

K_2Cr_2O_7法和紫外分光光度法测定污水COD的对比研究

分别利用重铬酸钾法、重铬酸钾紫外分光光度法和紫外分光光度法测定污水的COD极差分别为2.43mg/L、1.19 mg/L和4.72 mg/L,RE%分别为0.84%、0.53%和1.36%,重铬酸钾紫外分光光度法和紫外分光光度法的线性范围分别在0~280 mg/L和0~400 mg/L.结果表明:重铬酸钾紫外分光光度法测定的准确度和精密度最高,简化了用标准溶液进行标定的步骤,缩短了实验时间;紫外分光光度法测定的结果准确度和精密度相对差一些,但是快速、操作简单、节省试剂,为广大环境工作者提供借鉴参考的实例。     

环境影响评价中公众参与影响因素及方式分析研究

针对环境影响评价中公众参与影响因素及方式分析问题,介绍了环境影响评价中公众参与的特征,包括公开性、双向性和参与性,对公众参与的影响因素进行了分析,主要分析了利害关系人、法律制度、公共政策、市场经济发展水平和社会信息化程度,探讨了公众参与有效性要素的措施,主要有公众人员的选择、公众赋予的权力、参与时间的选择、解决矛盾能力和公众参与形式,在环境影响评价中进行公众参与不仅是环境影响评价本身的需要,同时也是中国民主制度的体现。