A fragment constant QSAR model for evaluating the EC50 values of organic chemicals to Daphnia magna.

The quantitative relationship between the median effective concentration (EC50) of organic chemicals to Daphnia magna and the number of molecular fragments was investigated based on experimental EC50 values for 217 chemicals derived from the literature. A fragment constant model was developed based on a multivariate linear regression between the number of fragments and the logarithmically transformed reciprocal values of EC50. Functional correction factors were introduced into the model. The model was verified using an independent set of randomly selected data. The mean residual of the final model was 0.4 log-units. The robustness of the model was discussed based on the results of three jackknife tests.     

化学溶胀法分离废弃线路板中金属与基板

废弃线路板的粉碎和所含金属组分的高效解离是后续分选回收的前提条件。本研究分别使用乙二胺等10种溶剂浸泡废弃线路板,比较对线路板中铜箔与基板间剥离强度的影响,从而筛选出4种有代表性的溶剂,即溶剂D、溶剂F、丙酮和水, 比较废弃线路板经化学溶胀后的单体解离度和获得一定粒径分布的颗粒所需的破碎时间。研究结果表明,化学溶胀后破碎能大幅提高金属的单体解离度,浸泡效果的优良排序为：溶剂D>溶剂F>丙酮>水;浸泡时间越长,浸泡温度越高,对剥离强度的降低越有利;使用溶剂D在150℃、3 h或140℃、5 h的工艺下浸泡废弃线路板,可以使铜箔与基板自动脱落。研究结果为后续的分选提供了便利的条件。     

聚苯乙烯基硫代磺酸钾树脂的合成及其与卤代烃的反应

由聚苯乙烯基磺酰氯树脂与硫化氢钾反应制备聚苯乙烯基硫代磺酸钾树脂（Ｉ）,树脂Ｉ与亲电的卤代烃反应,生成聚苯乙烯基硫代磺酸酯树脂（Ⅱ）,树脂Ⅱ经过乙硫醇处理,使卤代烃结构部分以不对称二硫醚的形式游离下来,用ＧＣ／ＭＳ对其结构进行鉴定。从不对称二硫醚的结构可推导出原卤代烃的结构,所制备的聚苯乙烯基硫代磺酸钾树脂的转化效率为１．１１ｍｍｏｌ·ｇ＾－１。     

活性炭电极对溶液中NaCl的电吸附行为

用活性炭、酚醛树脂和乌洛托品制备了活性炭电极。利用扫描电子显微镜(SEM)、傅立叶变换红外光谱仪(FTIR)分析了电极的表面性质,发现电极表面的黏结剂可完全碳化,且活性炭上带有大量含氧官能团;利用电化学工作站采用循环伏安法对电极进行了测试,表明电吸附是一稳定而又可逆的过程,电极电流的最大值由碳化前的0.019 8A升至碳化后的0.042 7A,双电层电容提高到碳化前的2.16倍;对NaCl的电吸附实验表明碳化后电极的电吸附率是碳化前的1.59倍,活性炭的吸附容量也由1.14mg/g提高到3.29mg/g,且活性炭电极具有良好的重复利用性。     

常减压蒸馏装置改造中的火灾危险性研究

应用火灾危险性预先分析法,对化工生产中的常减压蒸馏装置改造施工的火灾危险性进行分析,制定出相应的消防安全对策,以确保改造中的消防安全.     

浅谈安全文化

20世纪80年代,我国劳动保护界的学者和专家提出了安全文化的理念, 提出了劳动保护科学体系的构想,1992 年建立了相应的学科。20世纪末,我国一批学者又提出了安全、减灾、环境科学交叉融合的大安全科学技术体系,针对传统安全理念开展了企业安全文化、大众安全文化、社区安全文化等理论研究。为我国安全科学奠定了理论基础, 并不断完善和拓展了我国安全科学技术学科的建设。     

ABR反应器的两种快速启动方法对比

ABR反应器的启动是ABR反应器能否高效稳定运行的关键,其影响因素很多。为了更好地实现ABR反应器的启动,提出了通过2种不同启动方法的对比,即1^#反应器采用好氧预挂膜的方法,2^#反应器采用低负荷启动法,得出的结论为,好氧预挂膜启动法的启动时间短,COD去除率高,出水pH稳定,颗粒状污泥生长情况较好,是一种可推广的启动方法。     

脉冲电晕反应器结构对乙硫醇消除效果的影响

研究了脉冲电晕等离子体反应器结构的变化对乙硫醇消除效果的影响规律。结果表明,在反应器内设置折流板,可以增加气流的湍动程度,有利于活性粒子与污染物的充分接触,从而提高消除率。高压电极间距对电晕区范围及消毒效果有较大影响,间距较小将导致各电极产生的电场相互干扰明显,消除率减小;而电极间距过大,虽然电极间电场分布相互干扰小,但是反应器内可排布的电极数减少,总电晕区减少,消除率也减小。根据实验结果,电极间距设置为50 mm比较合理。另外,在相同的电场强度和脉冲频率下,毛刺形高压电极比线电极结构能耗低,能量利用率高。     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.