Toward Active Community Environmental Policing: Potentials and Limits of a Catalytic Model

This paper offers a field tested community environmental policing model to address the pressing environmental management challenges of reducing e-waste burning in informal e-waste hubs, and enforcement against informal polluting industries more broadly. This is based on our intervention to reduce e-waste burning in a substantial informal e-waste hub in the West Bank, Palestine, a 45 km2 region in which an estimated 5–10 metric tonnes of cables are burnt daily, causing serious environmental and public health consequences. In analogous e-waste hubs in the global South, environmental management solutions have focused on economically attractive alternatives to replace cable burning or policies that integrate informal recyclers with formal e-waste management systems—achieving little success. Our paper describes a two-pronged intervention in Palestine’s e-waste hub, which reduced e-waste burning by 80% through a combination of economically competitive cable grinding services and an “active” community environmental policing initiative that lowered barriers to and successfully advocated for governmental policing of e-waste burning. Our discussion of this intervention addresses the community environmental policing literature, which has documented few successes stories of real improvements to the enforcement of environmental violations. We argue that existing strategies have relied on “passive” approaches comprised of monitoring and reporting environmental violations to advocate for change. Our strategy offers a template to improve outcomes through a more “active” approach, moving from monitoring environmental violations through understanding the rationale and dynamics of violators, identifying environmental policing barriers, and implementing a feasible and persuasive strategy to overcome them.     

Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO<Subscript>2</Subscript> in the treatment of solution containing benzene,toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.

Open image in new window

Graphical abstract ?

     

Tributyltin chloride disrupts aortic vascular reactivity and increases reactive oxygen species production in female rats

Environmental Science and Pollution Research - Organotin compounds, such as tributyltin (TBT), are environment contaminants that induce bioaccumulation and have potential toxic effects on marine...     

Organisational challenges in the United Kingdom's post‐disaster ‘crisis support’ work

Local authorities in the United Kingdom are required to ‘lead’ multi‐agency humanitarian responses to major disasters. Concerns mounted in the late twentieth century that responses to people bereaved in the immediate aftermath of such events at best failed to meet their needs and at worst compounded their distress. Subsequent reviews and reforms reframed some victim needs as ‘rights’ and established legal, administrative, and practice frameworks to improve matters. Local authority ‘crisis support’, provided in partnership with other actors, lies at the heart of the UK's contemporary emergency response to the bereaved. Drawing on primary research on the development and the deployment of crisis support in a local authority, and while acknowledging both incident‐ and context‐related difficulties, this paper considers the significance of challenges with their origins in organisational factors. Recent developments within and between responders may exacerbate them. This paper argues, therefore, that further research into such developments is necessary.     

Rangeland Fire Protection Associations as disaster response organisations

Rangeland Fire Protection Associations (RFPAs) are volunteer-based groups of trained private landowners who are authorised to respond to events in partnership with governmental agencies. This study analysed the functioning and structure of RFPAs in Idaho and Oregon in the western United States to characterise this under-researched model of disaster response. RFPAs represent an expanding type of disaster response organisation that interfaces with established fire suppression entities, yet ‘emergent behaviour’ manifested in some RFPA response actions. This appeared to lessen and mediate with time, as well as due to recognition of the issues, increased experience of fires, and training that fostered new mutual understandings. There is a need for continued examination of the effect of repeat experience in developing the characteristics of disaster response organisations. In addition, it is crucial to know how the interface between established and other types of organisations may be enhanced to make cooperative disaster response more effective.     

Antibiotic Transport via Runoff and Soil Loss

Research has verified the occurrence of veterinary antibiotics in manure, agricultural fields, and surface water bodies, yet little research has evaluated antibiotic runoff from agricultural fields. The objective of this study was to evaluate the potential for agricultural runoff to contribute antibiotics to surface water bodies in a worst-case scenario. Our hypothesis was that there would be significant differences in antibiotic concentrations, partitioning of losses between runoff and sediment, and pseudo-partitioning coefficients (ratio of sediment concentration to runoff concentration) among antibiotics. An antibiotic solution including tetracycline (TC), chlortetracycline (CTC), sulfathiazole (STZ), sulfamethazine (SMZ), erythromycin (ERY), tylosin (TYL), and monensin (MNS) was sprayed on the soil surface 1 h before rainfall simulation (average intensity = 60 mm h(-1) for 1 h). Runoff samples were collected continuously and analyzed for aqueous and sediment antibiotic concentrations. MNS had the highest concentration in runoff, resulting in the highest absolute loss, although the amount of loss associated with sediment transport was <10%. ERY had the highest concentrations in sediment and had a relative loss associated with sediment >50%. TYL also had >50% relative loss associated with sediment, and its pseudo-partitioning coefficient (P-PC) was very high. The tetracyclines (TC and CTC) had very low aqueous concentrations and had the lowest absolute losses. If agricultural runoff is proven to result in development of resistance genes or toxicity to aquatic organisms, then erosion control practices could be used to reduce TC, ERY, and TYL losses leaving agricultural fields. Other methods will be needed to reduce transport of other antibiotics.     

Evaluation of modeling as a tool to determine the potential impacts related to drilling wastes in the Brazilian offshore

Numerical models that predict the fate of drilling discharges at sea constitute a valuable tool for both the oil industry and regulatory agencies. In order to provide reliable estimates, models must be validated through the comparison of predictions with field or laboratory observations. In this paper, we used the Offshore Operators Committee Model to simulate the discharges from two wells drilled at Campos Basin, offshore SE Brazil, and compared the results with field observations obtained 3 months after drilling. The comparison showed that the model provided reasonable predictions, considering that data about currents were reconstructed and theoretical data were used to characterize the classes of solids. The model proved to be a valuable tool to determine the degree of potential impact associated to drilling activities. However, since the accuracy of the model is directly dependent on the quality of input data, different possible scenarios should be considered when used for forecast modeling.     

Measured and modelled tritium concentrations in freshwater Barnes mussels (Elliptio complanata) exposed to an abrupt increase in ambient tritium levels

To improve understanding of environmental tritium behaviour, the International Atomic Energy Agency (IAEA) included a Tritium and C-14 Working Group (WG) in its EMRAS (Environmental Modelling for Radiation Safety) program. One scenario considered by the WG involved the prediction of time-dependent tritium concentrations in freshwater mussels that were subjected to an abrupt increase in ambient tritium levels. The experimental data used in the scenario were obtained from a study in which freshwater Barnes mussels (Elliptio complanata) were transplanted from an area with background tritium concentrations to a small Canadian Shield lake that contains elevated tritium. The mussels were then sampled over 88 days, and concentrations of free-water tritium (HTO) and organically-bound tritium (OBT) were measured in the soft tissues to follow the build-up of tritium in the mussels over time.The HTO concentration in the mussels reached steady state with the concentration in lake water within one or two hours. Most models predicted a longer time (up to a few days) to equilibrium. All models under-predicted the OBT concentration in the mussels one hour after transplantation, but over-predicted the rate of OBT formation over the next 24 h. Subsequent dynamics were not well modelled, although all participants predicted OBT concentrations that were within a factor of three of the observation at the end of the study period. The concentration at the final time point was over-predicted by all but one of the models. The relatively low observed concentration at this time was likely due to the loss of OBT by mussels during reproduction.