Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Application of multimedia exposure assessment to drinking water

A potentially important exposure route for humans is the ingestion of chemicals via drinking water. If comprehensive exposure assessments are to be completed for either existing or proposed new chemicals and cost effective control strategies developed, then a quantitative understanding of multimedia transport and fate of specific chemical pollutants must be achieved. Mathematical models provide a powerful framework into which quantitative relationships may be placed to provide guidance in reaching water quality goals. Existing, state-of-the-art media-specific toxic organic transport and fate models for atmospheric (DiDOT), land surface (NPS) and surface water processes (EXAMS) and potable water treatment (WTP) have been linked to demonstrate the technical feasibility of such an approach. Limited application and sensitivity testing of this linked modeling system has shown that the impact of various source loadings and control strategies on drinking water quality can be estimated.     

Estimating means and variances: The comparative efficiency of composite and grab samples

This paper compares the efficiencies of two sampling techniques for estimating a population mean and variance. One procedure, called grab sampling, consists of collecting and analyzing one sample per period. The second procedure, called composite sampling, collectsn samples per period which are then pooled and analyzed as a single sample. We review the well known fact that composite sampling provides a superior estimate of the mean. However, it is somewhat surprising that composite sampling does not always generate a more efficient estimate of the variance. For populations with platykurtic distributions, grab sampling gives a more efficient estimate of the variance, whereas composite sampling is better for leptokurtic distributions. These conditions on kurtosis can be related to peakedness and skewness. For example, a necessary condition for composite sampling to provide a more efficient estimate of the variance is that the population density function evaluated at the mean (i.e.f()) be greater than . If , then a grab sample is more efficient. In spite of this result, however, composite sampling does provide a smaller estimate of standard error than does grab sampling in the context of estimating population means.     

Sampling and analysis for radon-222 dissolved in ground water and surface water

Radon-222 is a naturally occurring radioactive gas in the uranium-238 decay series that has traditionally been called, simply, radon. The lung cancer risks associated with the inhalation of radon decay products have been well documented by epidemiological studies on populations of uranium miners.The realization that radon is a public health hazard has raised the need for sampling and analytical guidelines for field personnel. Several sampling and analytical methods are being used to document radon concentrations in ground water and surface water worldwide but no convenient, single set of guidelines is available. Three different sampling and analytical methods-bubbler, liquid scintillation, and field screening-are discussed in this paper. The bubbler and liquid scintillation methods have high accuracy and precision, and small analytical method detection limits of 0.2 and 10 pCi/l (picocuries per liter), respectively. The field screening method generally is used as a qualitative reconnaissance tool.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Genetic population structure of the recently introduced Asian clam,Potamocorbula amurensis,in San Francisco Bay

The genetic population structure of the recently introduced Asian clam, Potamocorbula amurensis, in San Francisco Bay was described using starch gel electrophoresis at eight presumptive loci. Specimens were taken from five environmentally distinct sites located throughout the bay. The population maintains a high degree of genetic variation, with a mean heterozygosity of 0.295, a mean polymorphism of 0.75, and an average of 3.70 alleles per locus. The population is genetically homogeneous, as evidenced from genetic distance values and F-statistics. However, heterogeneity of populations was indicated from a contingency chi-square test. Significant deviations from Hardy-Weinberg equilibrium and heterozygote deficiencies were found at the Lap-1 locus for all populations and at the Lap-2 locus for a single population. High levels of variability could represent a universal characteristic of invading species, the levels of variability in the source population(s), and/or the dynamics of the introduction. Lack of differentiation between subpopulations may be due to the immaturity of the San Francisco Bay population, the general purpose phenotype genetic strategy of the species, high rates of gene flow in the population, and/or the selective neutrality of the loci investigated.     

Immunity in children with exposure to environmental lead: II. Effects on humoral immunity

Lead has been found to depress the immune system in animal studies at levels far below those responsible for overt toxicity. Literature studies in animal systems most clearly showed an effect of lead on response to a specific immunogenic stimulus. Data are sparse concerning the effects of lead on the immune system in the human population at greatest risk for exposure-children up to six years of age. This portion of the Phase I study reports concentrations of IgG, IgM, IgA, and IgE, as well as antibody titers to the specific antigenic stimuli provided by the vaccines against diphtheria, tetanus, and Rubella. The study population consisted of a group of 193 children, ages 9 months to 6 years, who participate in the WIC (Women, Infants and Children) and Lead Poisoning Prevention Programs in the urban area of Springfield-Greene County Missouri. Blood lead levels ranged from 1 to 50 g dL^–1. Total Ig levels were determined and the data were analysed. No consistent significant differences were observed among the risk categories in the five age groups examined. A single Ig class in each of three age groups showed apparent significant differences among the various risk categories, but these differences were not correlated with blood lead. An analysis of specific antibody titers to diphtheria, tetanus, and Rubella was performed. Regression analyses of current data in Phase I of this study suggest a detrimental effect of lead on the antibody titres to diphtheria and Rubella.     

Polycyclic aromatic compounds in Northwest Atlantic COD (Gadus morhua)

Twenty-seven polycyclic aromatic compounds (PAC) including polycyclic aromatic hydrocarbons (PAH) and polycyclic aromatic sulphur heterocycles were analysed in muscle, liver and ovaries of cod (Gadus morhua) from the Northwest Atlantic. These PAC include the 16 PAH priority pollutants (EPA recommendation), alkylated naphthalenes, phenanthrene-anthracenes as well as dibenzothiophenes (DBT). Aromatics were undetectable in muscle. One of the analysed PAC was detected in one ovary and six in another ovary sample. Liver samples contained between 1 and 9 PAC. Of the parental PAH, only acenapthene (18 ng/g, dry weight), fluorene (28 ng/g) and chrysene (22 ng/g) were detected once each in two liver samples, while fluorene (72 ng/g) was detected once in one of the ovaries. C-2 DBT was the major component in ovaries and liver (8-86 ng/g), while C-3 and C-4 alkylated phenanthrene-anthracene (12-78 ng/g) were the next major components detected in the liver samples. This is the first detailed study of PAH and PAC in finfish from the Northwest Atlantic.     

Comparison of allozyme and mitochondrial DNA spatial differentiation in the limpet Patella vulgata

Allozyme and restriction enzyme analysis of mtDNA was used to study variation in samples from British populations of the marine limpet Patella vulgata in two regions. South Wales and Northeast England. Allozyme analysis revealed significant differences in allele frequencies among samples. However F _ST (population differentiation) values were no higher between than within regions, indicating that genetic heterogeneity was localised and not related to geographic separation. For mtDNA, samples from South Wales exhibited higher haplotype diversity values than samples from Northeast England. In addition there were substantial differences in the haplotype distribution between regions. The value of , the haploid analogoue of F _ST , was low within regions (=0.09) but high between regions (=0.44). The estimated difference in migration rate for allozymes and mtDNA exceed the neutral expectation, unless it is assumed that there are influential differences in the magnitude of female and male gametic dispersal.